FCC ID REP-7100-1

HotPort 7010 Mesh Node

by Firetide Inc.

Grantee Code: REP   Product Code: 71001
Latest application date: 2016-12-04

FCC ID Device Details

FCC IDREP-7100-1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeREP
Product Code71001
Applicant BusinessFiretide Inc. 🇺🇸
Related Domains firetide.com
Equipment ClassHotPort 7010 Mesh Node
Test FirmEUROFINS ELECTRICAL AND ELECTRONIC TESTING NA, INC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-12-04
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2011-10-06
4945-4985 MHzOriginal Equipment2010-01-07
5180-5240 MHzOriginal Equipment2010-01-07
2412-2462 MHzOriginal Equipment2010-01-07

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2010-01-07PDF 956.6 KB
Revised ManualUsers Manual2010-01-07PDF 956.6 KB
Internal PhotosInternal Photos2010-01-07PDF 850.3 KB
Internal photosInternal Photos2010-01-07PDF 850.3 KB
External PhotosExternal Photos2010-01-07PDF 123.2 KB
LabelID Label/Location Info2010-01-07PDF 38.9 KB
Label LocationID Label/Location Info2010-01-07PDF 879.2 KB
Test Setup PhotosTest Setup Photos2017-01-18PDF 373.4 KB
Test PhotosTest Setup Photos2010-01-07PDF 478.4 KB
Test SetupTest Setup Photos2010-01-07PDF 249.9 KB
Test Report - DFSTest Report2016-12-04PDF 1.7 MB
Test Report - UNII 3Test Report2016-12-04PDF 1.8 MB
Test Report Part 1Test Report2011-10-06PDF 3.2 MB
Test Report Part 2Test Report2011-10-06PDF 3.2 MB
ReportTest Report2010-01-07PDF 1.8 MB
Test ReportTest Report2010-01-07PDF 915 KB
Test ReportTest Report2010-01-07PDF 2.9 MB
Agent authorization letterCover Letter(s)2016-12-04PDF 21.3 KB
CIIPC letterCover Letter(s)2016-12-04PDF 380.9 KB
Long Term Confidentiality LetterCover Letter(s)2016-12-04PDF 176 KB
Short Term Confidentiality LetterCover Letter(s)2016-12-04PDF 135 KB
Class II Permissive Change LetterCover Letter(s)2011-10-06PDF 41.1 KB
ConfidentialityCover Letter(s)2010-01-07PDF 77 KB
Confidentiality LetterCover Letter(s)2010-01-07PDF 77 KB
Confidentiality letterCover Letter(s)2010-01-07PDF 77 KB
CorrespondenceCover Letter(s)2010-01-07PDF 118.9 KB
MPERF Exposure Info2016-12-04PDF 72.8 KB
Antenna DataRF Exposure Info2010-01-07PDF 3.7 MB
Antenna DatasheetRF Exposure Info2010-01-07PDF 125.1 KB
Antenna data sheetRF Exposure Info2010-01-07PDF 125.1 KB
MPERF Exposure Info2010-01-07PDF 23.9 KB
MPERF Exposure Info2010-01-07PDF 70 KB
MPERF Exposure Info2010-01-07PDF 110.4 KB
Tuneup statementParts List/Tune Up Info2010-01-07PDF 41.8 KB
FCC Software Security Metadata onlySDR Software/Security InfPDF 220.2 KB
Revised Software Security Metadata onlySDR Software/Security InfPDF 218 KB

Application Information

Application ID7VKtT+tQxCKVHyicipKx/Q==
Final Action Date2016-12-04
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0009447566
Model7100-1
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionHotPort 7010 Mesh Node
Responsible PartySudhir Hirudayaraj, CTO, shirudayaraj@firetide.com , prasanth@firetide.com , +1-4083557203
Technical ContactPrasant Kumar Hota, Firetide Inc., A Division of UNICOM GLOBAL, prasanth@firetide.com , 91 80 4021 5100
Test FirmGreg Kovolenko, EUROFINS ELECTRICAL AND ELECTRONIC TESTING NA, INC, greg.kovolenko@metlabs.com , 4108444071
TCB Emailtcbinfo@metlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date01/18/2017
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass II Permissive Change to meet newest U-NII requirements. Power listed is maximum combined conducted peak output. Device is a Mesh Node operating in 3x3 MIMO mode as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
7VKtT+tQxCKVHyicipKx/Q==2016-12-04Class II permissive change or modification of presently authorized equipment
CXZ7sIYEUskoPX4U0xsqtQ==2011-10-06Class II permissive change or modification of presently authorized equipment
olvf/7tVb8SWFza3j+rj/Q==2010-01-07Original Equipment
Xe4AoK2vFl+0B1ynde0bHQ==2010-01-07Original Equipment
27MpJsLFKbkyWNzJrDXK+g==2010-01-07Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
2412-2462 MHz0.652D7D15CCC, MO
2437 MHz0.492D7D15CCC, MO
4945-4985 MHz0.23320ppm4M14D7D9
4945-4985 MHz0.26720ppm8M27D7D9
4950-4980 MHz0.26120ppm16M4D7D9
5180-5240 MHz0.10515E38, CC, MO
5180-5240 MHz0.10515E
5180-5240 MHz0.035D7D15ECC, MO
5180-5240 MHz0.016D7D15ECC, MO
5180-5240 MHz0.045D7D15ECC, MO
5190-5230 MHz0.015D7D15ECC, MO
5260-5320 MHz0.10515E38, CC, MO, ND
5260-5320 MHz0.10515E
5500-5580 MHz0.10515E38, CC, MO, ND
5500-5580 MHz0.10515E
5660-5700 MHz0.10515E38, CC, MO, ND
5660-5700 MHz0.10515E
5745-5825 MHz0.916D7D15CCC, MO
5745-5825 MHz0.41615E38, CC, MO
5755-5795 MHz0.85D7D15CCC, MO
5755-5795 MHz0.18515E38, CC, MO

Grants

TCB Grant - Application Xe4AoK2vFl+0B1ynde0bHQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 01/07/2010

Application Dated: 01/07/2010
Firetide Inc.
140, Knowles Dr.
House/Apartment
Los Gatos, CA 95032
 
Attention: Suresh Kumar , Hardware Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-7100-1
Name of Grantee:  Firetide Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Hotport Model 7100 Mesh Node
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.035   D7D
CC MO 15E 5180.0  -  5240.0 0.016   D7D
CC MO 15E 5190.0  -  5230.0 0.015   D7D
CC MO 15E 5180.0  -  5240.0 0.045   D7D

Power listed is maximum combined conducted peak output. Device is a Mesh Node operating in 3x3 MIMO mode as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This product is restricted to indoor operation when used in the 5150-5250 MHz band.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Xe4AoK2vFl+0B1ynde0bHQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Firetide Inc.
140, Knowles Dr. House/Apartment
Los Gatos, CA 95032
United States
  Date of Grant: 01/07/2010

Application Dated: 01/07/2010
 
Attention: Suresh Kumar , Hardware Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-7100-1
Name of Grantee:  Firetide Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Hotport Model 7100 Mesh Node
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.035   D7D
CC MO 15E 5180.0  -  5240.0 0.016   D7D
CC MO 15E 5190.0  -  5230.0 0.015   D7D
CC MO 15E 5180.0  -  5240.0 0.045   D7D

Power listed is maximum combined conducted peak output. Device is a Mesh Node operating in 3x3 MIMO mode as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This product is restricted to indoor operation when used in the 5150-5250 MHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application olvf/7tVb8SWFza3j+rj/Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 01/07/2010

Application Dated: 01/07/2010
Firetide Inc.
140, Knowles Dr.
House/Apartment
Los Gatos, CA 95032
 
Attention: Suresh Kumar , Hardware Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-7100-1
Name of Grantee:  Firetide Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Hotport Model 7100 Mesh Node
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 4945.0  -  4985.0 0.233 20.0  PM 4M14D7D
90 4945.0  -  4985.0 0.267 20.0  PM 8M27D7D
90 4950.0  -  4980.0 0.261 20.0  PM 16M4D7D

Power listed is maximum conducted peak output. Device is a Mesh Node as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application olvf/7tVb8SWFza3j+rj/Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Firetide Inc.
140, Knowles Dr. House/Apartment
Los Gatos, CA 95032
United States
  Date of Grant: 01/07/2010

Application Dated: 01/07/2010
 
Attention: Suresh Kumar , Hardware Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-7100-1
Name of Grantee:  Firetide Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Hotport Model 7100 Mesh Node
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 4945.0  -  4985.0 0.233 20.0  PM 4M14D7D
90 4945.0  -  4985.0 0.267 20.0  PM 8M27D7D
90 4950.0  -  4980.0 0.261 20.0  PM 16M4D7D

Power listed is maximum conducted peak output. Device is a Mesh Node as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application CXZ7sIYEUskoPX4U0xsqtQ==

This application does not exist.

EAS Grant - Application CXZ7sIYEUskoPX4U0xsqtQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Firetide Inc.
Firetide Inc.A Division of UNICOM GLOBAL 2105, South Bascom Avenue, Suite 220
Campbell, CA 950008
United States
  Date of Grant: 10/06/2011

Application Dated: 06/27/2011
 
Attention: Sudhir Hirudayaraj , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-7100-1
Name of Grantee:  Firetide Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Hotport Model 7100 Mesh Node
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.105  
15E 5260.0  -  5320.0 0.105  
15E 5660.0  -  5700.0 0.105  
15E 5500.0  -  5580.0 0.105  

Power listed is maximum combined conducted peak output. Device is a Mesh Node operating in 3x3 MIMO mode as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This product is restricted to indoor operation when used in the 5150-5250 MHz band.



TCB Grant - Application 7VKtT+tQxCKVHyicipKx/Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 12/04/2016

Application Dated: 11/17/2016
Firetide Inc.
Firetide Inc.A Division of UNICOM GLOBAL
2105, South Bascom Avenue, Suite 220
Campbell, CA 950008
 
Attention: Sudhir Hirudayaraj , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-7100-1
Name of Grantee:  Firetide Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: HotPort 7010 Mesh Node
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.105  
38 CC MO ND 15E 5260.0  -  5320.0 0.105  
38 CC MO ND 15E 5660.0  -  5700.0 0.105  
38 CC MO ND 15E 5500.0  -  5580.0 0.105  
38 CC MO 15E 5745.0  -  5825.0 0.416  
38 CC MO 15E 5755.0  -  5795.0 0.185  

Class II Permissive Change to meet newest U-NII requirements. Power listed is maximum combined conducted peak output. Device is a Mesh Node operating in 3x3 MIMO mode as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 7VKtT+tQxCKVHyicipKx/Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Firetide Inc.
Firetide Inc.A Division of UNICOM GLOBAL 2105, South Bascom Avenue, Suite 220
Campbell, CA 950008
United States
  Date of Grant: 12/04/2016

Application Dated: 11/17/2016
 
Attention: Sudhir Hirudayaraj , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-7100-1
Name of Grantee:  Firetide Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: HotPort 7010 Mesh Node
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.105  
38 CC MO ND 15E 5260.0  -  5320.0 0.105  
38 CC MO ND 15E 5660.0  -  5700.0 0.105  
38 CC MO ND 15E 5500.0  -  5580.0 0.105  
38 CC MO 15E 5745.0  -  5825.0 0.416  
38 CC MO 15E 5755.0  -  5795.0 0.185  

Class II Permissive Change to meet newest U-NII requirements. Power listed is maximum combined conducted peak output. Device is a Mesh Node operating in 3x3 MIMO mode as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 27MpJsLFKbkyWNzJrDXK+g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 01/07/2010

Application Dated: 01/05/2010
Firetide Inc.
140, Knowles Dr.
House/Apartment
Los Gatos, CA 95032
 
Attention: Suresh Kumar , Hardware Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-7100-1
Name of Grantee:  Firetide Inc.
Equipment Class: Digital Transmission System
Notes: Hotport Model 7100 Mesh Node
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.652   D7D
CC MO 15C 2437.0  -  2437.0 0.492   D7D
CC MO 15C 5745.0  -  5825.0 0.916   D7D
CC MO 15C 5755.0  -  5795.0 0.85   D7D

Power listed is maximum combined conducted peak output. Device is a Mesh Node operating in 3x3 MIMO mode as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 27MpJsLFKbkyWNzJrDXK+g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Firetide Inc.
140, Knowles Dr. House/Apartment
Los Gatos, CA 95032
United States
  Date of Grant: 01/07/2010

Application Dated: 01/05/2010
 
Attention: Suresh Kumar , Hardware Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-7100-1
Name of Grantee:  Firetide Inc.
Equipment Class: Digital Transmission System
Notes: Hotport Model 7100 Mesh Node
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.652   D7D
CC MO 15C 2437.0  -  2437.0 0.492   D7D
CC MO 15C 5745.0  -  5825.0 0.916   D7D
CC MO 15C 5755.0  -  5795.0 0.85   D7D

Power listed is maximum combined conducted peak output. Device is a Mesh Node operating in 3x3 MIMO mode as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: