FCC ID REP-7100-W

HotPort 7010(W) Outdoor Mesh Node

by Firetide Inc.

Grantee Code: REP   Product Code: 7100W
Latest application date: 2017-03-09

FCC ID Device Details

FCC IDREP-7100-W
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeREP
Product Code7100W
Applicant BusinessFiretide Inc. 🇺🇸
Related Domains firetide.com
Equipment ClassHotPort 7010(W) Outdoor Mesh Node
Test FirmEUROFINS ELECTRICAL AND ELECTRONIC TESTING NA, INC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
4942.5-4987.5 MHzOriginal Equipment2017-03-09
2412-2462 MHzOriginal Equipment2017-03-09
5180-5240 MHzOriginal Equipment2017-03-09

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2017-04-23PDF 3.7 MB
User manualUsers Manual2017-04-23PDF 3.7 MB
user manual Metadata onlyUsers Manual2017-04-23PDF 3.7 MB
Internal PhotosInternal Photos2017-04-23PDF 4.6 MB
External PhotosExternal Photos2017-04-23PDF 1.2 MB
LabelID Label/Location Info2017-03-09PDF 638.9 KB
Label and LocationID Label/Location Info2017-03-09PDF 638.9 KB
Test Setup PhotosTest Setup Photos2017-04-23PDF 748.4 KB
Test Setup PhotosTest Setup Photos2017-04-23PDF 455.3 KB
Test Setup PhotosTest Setup Photos2017-04-23PDF 211.3 KB
Test ReportTest Report2017-03-09PDF 4 MB
Test Report Part 90MTest Report2017-03-09PDF 1.1 MB
Test Report Part 90YTest Report2017-03-09PDF 1.3 MB
Test Report UNII 1Test Report2017-03-09PDF 1.5 MB
Test Report UNII 2Test Report2017-03-09PDF 3.2 MB
Test Report UNII 3Test Report2017-03-09PDF 1.3 MB
Long Term Confidentiality LetterCover Letter(s)2017-03-09PDF 24.2 KB
Short Term Confidentiality LetterCover Letter(s)2017-03-09PDF 29.3 KB
Antenna GainsRF Exposure Info2017-03-09PDF 2.7 MB
Antenna Radiation PatternsRF Exposure Info2017-03-09PDF 1.8 MB
MPERF Exposure Info2017-03-09PDF 85.7 KB
MPERF Exposure Info2017-03-09PDF 108.9 KB
MPERF Exposure Info2017-03-09PDF 185.7 KB
Block Diagrams Metadata onlyBlock DiagramPDF 955.5 KB
Block diagrams Metadata onlyBlock DiagramPDF 955.5 KB
Layouts Metadata onlySchematicsPDF 1.4 MB
Radio Assembly Metadata onlySchematicsPDF 115.2 KB
Schematics Metadata onlySchematicsPDF 991.5 KB
Firetide Channel Plan Metadata onlyOperational DescriptionPDF 76.6 KB
Firetide Channel Plan Sheet Metadata onlyOperational DescriptionPDF 76.6 KB
Theory of Operation Metadata onlyOperational DescriptionPDF 802.3 KB
Software Security Metadata onlySDR Software/Security InfPDF 218.2 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 196.5 KB

Application Information

Application IDb445kJneARfu/RKMGpOpRw==
Final Action Date2017-03-09
Application PurposeOriginal Equipment
Applicant FRN0009447566
Model7100-W
Frequency Range4942.5-4987.5 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionHotPort 7010(W) Outdoor Mesh Node
Responsible PartySudhir Hirudayaraj, CTO, shirudayaraj@firetide.com , prasanth@firetide.com , +1-4083557203
Technical ContactPrasant Kumar Hota, Firetide Inc., A Division of UNICOM GLOBAL, prasanth@firetide.com , 91 80 4021 5100
Test FirmGreg Kovolenko, EUROFINS ELECTRICAL AND ELECTRONIC TESTING NA, INC, greg.kovolenko@metlabs.com , 4108444071
TCB Emailtcbinfo@metlabs.com
TCB ScopeB4: Microwave, Millimeter Wave Band and Citizens Broadband Radio Services equipment in 47 CFR Parts 25, 30, 74, 90, 95, 96, 97, 101 (all above 3 GHz)
Short-Term ConfidentialityYes
Short-Term Confidentiality Date04/23/2017
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsOutput power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 5, 10 and 20MHz bandwidths.

Applications

Application IDDatePurpose
b445kJneARfu/RKMGpOpRw==2017-03-09Original Equipment
Vy+dKXPpSm55Tyei4h+j4w==2017-03-09Original Equipment
L+cdnFaGxeDxZNHYy2OMGg==2017-03-09Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
2412-2462 MHz0.1115CCC, MO
2422-2452 MHz0.2315CCC, MO
4942.5-4987.5 MHz0.0439ppm4M2D7D90Y
4945-4985 MHz0.0739ppm8M5D7D90Y
4950-4980 MHz0.0429ppm17M2D7D90Y
5180-5240 MHz0.29615E38, CC, MO
5190-5230 MHz0.47515E38, CC, MO
5260-5320 MHz0.07315E38, CC, MO, ND
5270-5310 MHz0.11815E38, CC, MO, ND
5500-5700 MHz0.06515E38, CC, MO, ND
5510-5670 MHz0.11515E38, CC, MO, ND
5745-5805 MHz0.47515E38, CC, MO
5755-5795 MHz0.45415E38, CC, MO
5860-5920 MHz0.0455ppm12M6D7D9
5875-5905 MHz0.0055ppm20M4D7D9

Grants

TCB Grant - Application Vy+dKXPpSm55Tyei4h+j4w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 03/09/2017

Application Dated: 02/27/2017
Firetide Inc.
Firetide Inc.A Division of UNICOM GLOBAL
2105, South Bascom Avenue, Suite 220
Campbell, CA 950008
 
Attention: Sudhir Hirudayaraj , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-7100-W
Name of Grantee:  Firetide Inc.
Equipment Class: Digital Transmission System
Notes: HotPort 7010(W) Outdoor Mesh Node
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.11  
CC MO 15C 2422.0  -  2452.0 0.23  

Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 and 40MHz bandwidths.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Vy+dKXPpSm55Tyei4h+j4w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Firetide Inc.
Firetide Inc.A Division of UNICOM GLOBAL 2105, South Bascom Avenue, Suite 220
Campbell, CA 950008
United States
  Date of Grant: 03/09/2017

Application Dated: 02/27/2017
 
Attention: Sudhir Hirudayaraj , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-7100-W
Name of Grantee:  Firetide Inc.
Equipment Class: Digital Transmission System
Notes: HotPort 7010(W) Outdoor Mesh Node
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.11  
CC MO 15C 2422.0  -  2452.0 0.23  

Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 and 40MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application L+cdnFaGxeDxZNHYy2OMGg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 03/09/2017

Application Dated: 02/28/2017
Firetide Inc.
Firetide Inc.A Division of UNICOM GLOBAL
2105, South Bascom Avenue, Suite 220
Campbell, CA 950008
 
Attention: Sudhir Hirudayaraj , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-7100-W
Name of Grantee:  Firetide Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: HotPort 7010(W) Outdoor Mesh Node
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.296  
38 CC MO 15E 5190.0  -  5230.0 0.475  
38 CC MO ND 15E 5260.0  -  5320.0 0.073  
38 CC MO ND 15E 5270.0  -  5310.0 0.118  
38 CC MO ND 15E 5500.0  -  5700.0 0.065  
38 CC MO ND 15E 5510.0  -  5670.0 0.115  
38 CC MO 15E 5745.0  -  5805.0 0.475  
38 CC MO 15E 5755.0  -  5795.0 0.454  

Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 and 40MHz bandwidths.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application L+cdnFaGxeDxZNHYy2OMGg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Firetide Inc.
Firetide Inc.A Division of UNICOM GLOBAL 2105, South Bascom Avenue, Suite 220
Campbell, CA 950008
United States
  Date of Grant: 03/09/2017

Application Dated: 02/28/2017
 
Attention: Sudhir Hirudayaraj , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-7100-W
Name of Grantee:  Firetide Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: HotPort 7010(W) Outdoor Mesh Node
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.296  
38 CC MO 15E 5190.0  -  5230.0 0.475  
38 CC MO ND 15E 5260.0  -  5320.0 0.073  
38 CC MO ND 15E 5270.0  -  5310.0 0.118  
38 CC MO ND 15E 5500.0  -  5700.0 0.065  
38 CC MO ND 15E 5510.0  -  5670.0 0.115  
38 CC MO 15E 5745.0  -  5805.0 0.475  
38 CC MO 15E 5755.0  -  5795.0 0.454  

Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 and 40MHz bandwidths.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application b445kJneARfu/RKMGpOpRw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 03/09/2017

Application Dated: 02/27/2017
Firetide Inc.
Firetide Inc.A Division of UNICOM GLOBAL
2105, South Bascom Avenue, Suite 220
Campbell, CA 950008
 
Attention: Sudhir Hirudayaraj , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-7100-W
Name of Grantee:  Firetide Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: HotPort 7010(W) Outdoor Mesh Node
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90Y 4942.5  -  4987.5 0.043 9.0  PM 4M2D7D
90Y 4950.0  -  4980.0 0.042 9.0  PM 17M2D7D
90Y 4945.0  -  4985.0 0.073 9.0  PM 8M5D7D
90 5860.0  -  5920.0 0.045 5.0  PM 12M6D7D
90 5875.0  -  5905.0 0.005 5.0  PM 20M4D7D

Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 5, 10 and 20MHz bandwidths.

EAS Grant - Application b445kJneARfu/RKMGpOpRw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Firetide Inc.
Firetide Inc.A Division of UNICOM GLOBAL 2105, South Bascom Avenue, Suite 220
Campbell, CA 950008
United States
  Date of Grant: 03/09/2017

Application Dated: 02/27/2017
 
Attention: Sudhir Hirudayaraj , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-7100-W
Name of Grantee:  Firetide Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: HotPort 7010(W) Outdoor Mesh Node
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90Y 4942.5  -  4987.5 0.043 9.0  PM 4M2D7D
90Y 4950.0  -  4980.0 0.042 9.0  PM 17M2D7D
90Y 4945.0  -  4985.0 0.073 9.0  PM 8M5D7D
90 5860.0  -  5920.0 0.045 5.0  PM 12M6D7D
90 5875.0  -  5905.0 0.005 5.0  PM 20M4D7D

Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 5, 10 and 20MHz bandwidths.



Mail To: