FCC ID RF41539F
Module
by Keyence Corporation
Grantee Code: RF4 Product Code: 1539F
Latest application date: 2022-04-05
FCC ID Device Details
| FCC ID | RF41539F |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RF4 |
| Product Code | 1539F |
| Applicant Business | Keyence Corporation 🇯🇵 |
| Related Domains |  keyence.co.jp |
| Equipment Class | Module |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYK-261ACNBT Grant Date: 09/12/2017 | 2022-04-05 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYK-261ACNBT Grant Date: 09/12/2017 | 2022-04-05 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYK-261ACNBT Grant Date: 09/12/2017 | 2022-04-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2022-04-05 | PDF 2.3 MB |
| Label and Label Location | ID Label/Location Info | 2022-04-05 | PDF 730.9 KB |
| Cover Letters | Cover Letter(s) | 2022-04-05 | PDF 687 KB |
| Users Manual Metadata only | Users Manual | PDF 4.9 MB |
Application Information
| Application ID | azrpEBdpjT+pHX8w4uH6Nw== |
|---|---|
| Final Action Date | 2022-04-05 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: RYK-261ACNBT Grant Date: 09/12/2017 |
| Applicant FRN | 0009419870 |
| Model | 1539F |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Module |
| Responsible Party | Katsuya Ota, Manager, Product Safety & Compliance Group, ootak@keyence.co.jp , +81-6-6379-1111 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com  , +886-3-2600884 |
| TCB Email | jin.xu@nemko.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| azrpEBdpjT+pHX8w4uH6Nw== | 2022-04-05 | Change in identification of presently authorized equipment. Original FCC ID: RYK-261ACNBT Grant Date: 09/12/2017 |
| BzShfnf4JZ1MggklY2agmg== | 2022-04-05 | Change in identification of presently authorized equipment. Original FCC ID: RYK-261ACNBT Grant Date: 09/12/2017 |
| 79G3icmzLMsrL7jGKnxmgQ== | 2022-04-05 | Change in identification of presently authorized equipment. Original FCC ID: RYK-261ACNBT Grant Date: 09/12/2017 |
| 2qZR3qxTb9oqAox38CCwzA== | 2022-04-05 | Change in identification of presently authorized equipment. Original FCC ID: RYK-261ACNBT Grant Date: 09/12/2017 |
Equipment Authorization
Grants
TCB Grant - Application BzShfnf4JZ1MggklY2agmg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 04/05/2022 Application Dated: 04/05/2022 |
| Keyence Corporation |
| 1-3-14, Higashinakajima |
| Higashiyodogwa-ku |
| Osaka, 533-8555 Japan |
| Attention: Katsuya Ota , Manager, Product Safety & Compliance Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RF41539F |
| Name of Grantee: | Keyence Corporation |
| Equipment Class: | Part 15 Class B Digital Device |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application BzShfnf4JZ1MggklY2agmg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Keyence Corporation 1-3-14, Higashinakajima Higashiyodogwa-ku Osaka, 533-8555 Japan |
Date of Grant: 04/05/2022 Application Dated: 04/05/2022 |
| Attention: Katsuya Ota , Manager, Product Safety & Compliance Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RF41539F |
| Name of Grantee: | Keyence Corporation |
| Equipment Class: | Part 15 Class B Digital Device |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 04/05/2022 Application Dated: 04/05/2022 |
| Keyence Corporation |
| 1-3-14, Higashinakajima |
| Higashiyodogwa-ku |
| Osaka, 533-8555 Japan |
| Attention: Katsuya Ota , Manager, Product Safety & Compliance Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RF41539F |
| Name of Grantee: | Keyence Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 MO | 15E | 5180.0 - 5240.0 | 0.08 | ||
| 38 MO | 15E | 5260.0 - 5320.0 | 0.0749 | ||
| 38 MO | 15E | 5500.0 - 5720.0 | 0.0501 | ||
| 38 ND | 15E | 5745.0 - 5825.0 | 0.0674 |
| Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application azrpEBdpjT+pHX8w4uH6Nw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Keyence Corporation 1-3-14, Higashinakajima Higashiyodogwa-ku Osaka, 533-8555 Japan |
Date of Grant: 04/05/2022 Application Dated: 04/05/2022 |
| Attention: Katsuya Ota , Manager, Product Safety & Compliance Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RF41539F |
| Name of Grantee: | Keyence Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 MO | 15E | 5180.0 - 5240.0 | 0.08 | ||
| 38 MO | 15E | 5260.0 - 5320.0 | 0.0749 | ||
| 38 MO | 15E | 5500.0 - 5720.0 | 0.0501 | ||
| 38 ND | 15E | 5745.0 - 5825.0 | 0.0674 |
| Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 04/05/2022 Application Dated: 04/05/2022 |
| Keyence Corporation |
| 1-3-14, Higashinakajima |
| Higashiyodogwa-ku |
| Osaka, 533-8555 Japan |
| Attention: Katsuya Ota , Manager, Product Safety & Compliance Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RF41539F |
| Name of Grantee: | Keyence Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.002 | |||
| MO | 15C | 2412.0 - 2462.0 | 0.485 | ||
| MO | 15C | 2422.0 - 2452.0 | 0.205 |
| Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 79G3icmzLMsrL7jGKnxmgQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Keyence Corporation 1-3-14, Higashinakajima Higashiyodogwa-ku Osaka, 533-8555 Japan |
Date of Grant: 04/05/2022 Application Dated: 04/05/2022 |
| Attention: Katsuya Ota , Manager, Product Safety & Compliance Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RF41539F |
| Name of Grantee: | Keyence Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.002 | |||
| MO | 15C | 2412.0 - 2462.0 | 0.485 | ||
| MO | 15C | 2422.0 - 2452.0 | 0.205 |
| Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 04/05/2022 Application Dated: 04/05/2022 |
| Keyence Corporation |
| 1-3-14, Higashinakajima |
| Higashiyodogwa-ku |
| Osaka, 533-8555 Japan |
| Attention: Katsuya Ota , Manager, Product Safety & Compliance Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RF41539F |
| Name of Grantee: | Keyence Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.015 |
| Modular Approval. Output power listed is maximum combined conducted. . This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
EAS Grant - Application 2qZR3qxTb9oqAox38CCwzA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Keyence Corporation 1-3-14, Higashinakajima Higashiyodogwa-ku Osaka, 533-8555 Japan |
Date of Grant: 04/05/2022 Application Dated: 04/05/2022 |
| Attention: Katsuya Ota , Manager, Product Safety & Compliance Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RF41539F |
| Name of Grantee: | Keyence Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.015 |
| Modular Approval. Output power listed is maximum combined conducted. . This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| Mail To: |