FCC ID RF41607A
Single Modular
by Keyence Corporation
Grantee Code: RF4 Product Code: 1607A
Latest application date: 2022-01-11
FCC ID Device Details
| FCC ID | RF41607A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RF4 |
| Product Code | 1607A |
| Applicant Business | Keyence Corporation 🇯🇵 |
| Related Domains |  keyence.co.jp |
| Equipment Class | Single Modular |
| Test Firm | Japan Qlty. Assur. Org. Kitakansai Testing Center |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2022-01-11 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYYWYSAGVDXG Grant Date: 04/18/2019 | 2021-09-13 |
| 5180-5320 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYYWYSAGVDXG Grant Date: 04/18/2019 | 2021-09-13 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYYWYSAGVDXG Grant Date: 04/18/2019 | 2021-09-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users_manual_XM Series re4 | Users Manual | 2022-03-11 | PDF 919 KB |
| WLAN module SET XM-WA Instruction Manual XXXXXGB | Users Manual | 2022-03-11 | PDF 207.6 KB |
| Host internal photos | Internal Photos | 2022-03-11 | PDF 117.6 KB |
| Host external photos re.2 | External Photos | 2022-03-11 | PDF 384.4 KB |
| External Photos | External Photos | 2021-09-13 | PDF 235.6 KB |
| Host label fomat and location re1 | ID Label/Location Info | 2022-01-11 | PDF 237.9 KB |
| Label_Label Location | ID Label/Location Info | 2021-09-13 | PDF 184.9 KB |
| SAR Test setup photos KL80210011 | Test Setup Photos | 2022-03-11 | PDF 64.4 KB |
| SAR test report 1 | RF Exposure Info | 2022-01-11 | PDF 566.9 KB |
| SAR test report 2 | RF Exposure Info | 2022-01-11 | PDF 1.4 MB |
| C2PC letter | Cover Letter(s) | 2022-01-11 | PDF 78 KB |
| Confidential request letter re1 | Cover Letter(s) | 2022-01-11 | PDF 150.7 KB |
| Explanation of the operation between XM-WA and XM-5000 series | Cover Letter(s) | 2022-01-11 | PDF 299.8 KB |
| FCC_Agent Authorization letter rev1 | Cover Letter(s) | 2022-01-11 | PDF 186.8 KB |
| Agent Authorization Letter | Cover Letter(s) | 2021-09-13 | PDF 186.8 KB |
| Change in ID Request Letter | Cover Letter(s) | 2021-09-13 | PDF 83.3 KB |
| Original Grantee Cover Letter | Cover Letter(s) | 2021-09-13 | PDF 111.8 KB |
| Tune_up power_table re1 Metadata only | Parts List/Tune Up Info | PDF 320.3 KB |
Application Information
| Application ID | i9JcwDnWPs2Flt3jfYEhGQ== |
|---|---|
| Final Action Date | 2022-01-11 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0009419870 |
| Model | 1607A |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Single Modular |
| Responsible Party | Katsuya Ota, Manager, Product Safety & Compliance Group, ootak@keyence.co.jp , +81-6-6379-1111 |
| Test Firm | Kousei Shibata, Japan Qlty. Assur. Org. Kitakansai Testing Center, shibata-kousei@jqa.jp  , 81-72-640-5270 |
| TCB Email | LST.FRE.CertNotice@ul.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/11/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change to add a handheld accessory host and disable UNII and Bluetooth/BLE functions via software as documented in this filing. The highest reported extremity SAR is 0.52 W/kg (10-g). Single Modular Approval. Output power listed is Conducted (Peak). For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has 20 MHz and 40 MHz bandwidth modes for 2.4 GHz bands. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| i9JcwDnWPs2Flt3jfYEhGQ== | 2022-01-11 | Class II permissive change or modification of presently authorized equipment |
| xjLwVFsNlUFlAEZAeBtumQ== | 2021-09-13 | Change in identification of presently authorized equipment. Original FCC ID: RYYWYSAGVDXG Grant Date: 04/18/2019 |
| gm1cia0uSn7rVn1z3X5H/Q== | 2021-09-13 | Change in identification of presently authorized equipment. Original FCC ID: RYYWYSAGVDXG Grant Date: 04/18/2019 |
| 2nEyaDeft/E4y5hHIsGxFg== | 2021-09-13 | Change in identification of presently authorized equipment. Original FCC ID: RYYWYSAGVDXG Grant Date: 04/18/2019 |
Equipment Authorization
Grants
TCB Grant - Application xjLwVFsNlUFlAEZAeBtumQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/13/2021 Application Dated: 09/07/2021 |
| Keyence Corporation |
| 1-3-14, Higashinakajima |
| Higashiyodogwa-ku |
| Osaka, 533-8555 Japan |
| Attention: Katsuya Ota , Manager, Product Safety & Compliance Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RF41607A |
| Name of Grantee: | Keyence Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0026 |
| Single Modular Approval. Output power listed is Conducted (Peak). For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application xjLwVFsNlUFlAEZAeBtumQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Keyence Corporation 1-3-14, Higashinakajima Higashiyodogwa-ku Osaka, 533-8555 Japan |
Date of Grant: 09/13/2021 Application Dated: 09/07/2021 |
| Attention: Katsuya Ota , Manager, Product Safety & Compliance Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RF41607A |
| Name of Grantee: | Keyence Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0026 |
| Single Modular Approval. Output power listed is Conducted (Peak). For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 01/11/2022 Application Dated: 01/11/2022 |
| Keyence Corporation |
| 1-3-14, Higashinakajima |
| Higashiyodogwa-ku |
| Osaka, 533-8555 Japan |
| Attention: Katsuya Ota , Manager, Product Safety & Compliance Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RF41607A |
| Name of Grantee: | Keyence Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Modular |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2339 |
| Class II permissive change to add a handheld accessory host and disable UNII and Bluetooth/BLE functions via software as documented in this filing. The highest reported extremity SAR is 0.52 W/kg (10-g). Single Modular Approval. Output power listed is Conducted (Peak). For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has 20 MHz and 40 MHz bandwidth modes for 2.4 GHz bands. |
EAS Grant - Application i9JcwDnWPs2Flt3jfYEhGQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Keyence Corporation 1-3-14, Higashinakajima Higashiyodogwa-ku Osaka, 533-8555 Japan |
Date of Grant: 01/11/2022 Application Dated: 01/11/2022 |
| Attention: Katsuya Ota , Manager, Product Safety & Compliance Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RF41607A |
| Name of Grantee: | Keyence Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Modular |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2339 |
| Class II permissive change to add a handheld accessory host and disable UNII and Bluetooth/BLE functions via software as documented in this filing. The highest reported extremity SAR is 0.52 W/kg (10-g). Single Modular Approval. Output power listed is Conducted (Peak). For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has 20 MHz and 40 MHz bandwidth modes for 2.4 GHz bands. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/13/2021 Application Dated: 09/07/2021 |
| Keyence Corporation |
| 1-3-14, Higashinakajima |
| Higashiyodogwa-ku |
| Osaka, 533-8555 Japan |
| Attention: Katsuya Ota , Manager, Product Safety & Compliance Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RF41607A |
| Name of Grantee: | Keyence Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5320.0 | 0.0213 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0217 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0187 |
| Single Modular Approval. Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application gm1cia0uSn7rVn1z3X5H/Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Keyence Corporation 1-3-14, Higashinakajima Higashiyodogwa-ku Osaka, 533-8555 Japan |
Date of Grant: 09/13/2021 Application Dated: 09/07/2021 |
| Attention: Katsuya Ota , Manager, Product Safety & Compliance Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RF41607A |
| Name of Grantee: | Keyence Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5320.0 | 0.0213 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0217 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0187 |
| Single Modular Approval. Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/13/2021 Application Dated: 09/07/2021 |
| Keyence Corporation |
| 1-3-14, Higashinakajima |
| Higashiyodogwa-ku |
| Osaka, 533-8555 Japan |
| Attention: Katsuya Ota , Manager, Product Safety & Compliance Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RF41607A |
| Name of Grantee: | Keyence Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2339 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0012 |
| Single Modular Approval. Output power listed is Conducted (Peak). For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has 20 MHz and 40 MHz bandwidth modes for 2.4 GHz bands. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 2nEyaDeft/E4y5hHIsGxFg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Keyence Corporation 1-3-14, Higashinakajima Higashiyodogwa-ku Osaka, 533-8555 Japan |
Date of Grant: 09/13/2021 Application Dated: 09/07/2021 |
| Attention: Katsuya Ota , Manager, Product Safety & Compliance Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RF41607A |
| Name of Grantee: | Keyence Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2339 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0012 |
| Single Modular Approval. Output power listed is Conducted (Peak). For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has 20 MHz and 40 MHz bandwidth modes for 2.4 GHz bands. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |