FCC ID RFM-ACCESS-ONE

802.11 a/b/g Wireless Access Point

by Strix Systems, Inc.

Grantee Code: RFM   Product Code: ACCESSONE
Latest application date: 2004-01-14

FCC ID Device Details

FCC IDRFM-ACCESS-ONE
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRFM
Product CodeACCESSONE
Applicant BusinessStrix Systems, Inc. 🇺🇸
Related Domains strixsystems.com
Equipment Class802.11 a/b/g Wireless Access Point
Test FirmCompatible Electronics

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5250 MHzOriginal Equipment2004-01-14
2412-2462 MHzOriginal Equipment2004-01-14

Exhibits

DocumentTypeAvailableFile
Access One Quick Start GuideUsers Manual2004-01-14PDF 274 KB
AccessOne Network User GuideUsers Manual2004-01-14PDF 3.4 MB
Owners ManualUsers Manual2004-01-14PDF 276.4 KB
Internal Photos 1Internal Photos2004-01-14PDF 3.4 MB
Internal Photos 2Internal Photos2004-01-14PDF 3.8 MB
Internal Photos 3Internal Photos2004-01-14PDF 2.3 MB
External PhotosExternal Photos2004-01-14PDF 1.1 MB
FCC ID LabelID Label/Location Info2004-01-14PDF 222.2 KB
Setup PhotosTest Setup Photos2004-01-14PDF 1.6 MB
Report Attachment 1Test Report2004-01-14PDF 3.6 MB
Report Attachment 1Test Report2004-01-14PDF 3.3 MB
Report Attachment 2Test Report2004-01-14PDF 2.5 MB
Report Attachment 2Test Report2004-01-14PDF 1.2 MB
Report Attachment 3Test Report2004-01-14PDF 2.4 MB
Report Attachment 3Test Report2004-01-14PDF 1.5 MB
Report Attachment 4Test Report2004-01-14PDF 2.4 MB
Report Attachment 4Test Report2004-01-14PDF 444.8 KB
Report Attachment 5Test Report2004-01-14PDF 2.5 MB
Report Attachment 6Test Report2004-01-14PDF 2.4 MB
Report Attachment 7Test Report2004-01-14PDF 444.8 KB
Test ReportTest Report2004-01-14PDF 1.8 MB
Test ReportTest Report2004-01-14PDF 1.5 MB
Configuration NoteCover Letter(s)2004-01-14PDF 17.8 KB
Expository StatementCover Letter(s)2004-01-14PDF 4.5 KB
Request for ConfidentialityCover Letter(s)2004-01-14PDF 327.6 KB
TCB Q and ACover Letter(s)2004-01-14PDF 20.4 KB
Antenna InformationParts List/Tune Up Info2004-01-14PDF 3.8 KB
MPERF Exposure Info2004-01-14PDF 120.8 KB
MPE Calculations for 2400MHz BandRF Exposure Info2004-01-14PDF 122.9 KB
MPE Calculations for 5800MHz BandRF Exposure Info2004-01-14PDF 123.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 11.4 KB
Schematics 1 Metadata onlySchematicsPDF 329.9 KB
Schematics 2 Metadata onlySchematicsPDF 319.6 KB
Technical Description Metadata onlyOperational DescriptionPDF 100.7 KB

Application Information

Application IDaMu5sryqlj/bULZo5kDetA==
Final Action Date2004-01-14
Application PurposeOriginal Equipment
Applicant FRN0009500968
ModelACCESS-ONE
Frequency Range5180-5250 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11 a/b/g Wireless Access Point
Responsible PartyAlexander Berg, VP, R&D;, alex.berg@strixsystems.com , 818-251-1042
Test FirmScott McCutchan, Compatible Electronics, 714-579-0500
TCB Emailmkuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Grantee must ensure that installation and use procedures comply with 15.407 integral antenna and indoor-use-only requirements. This device must utilize an EPROM identification mechanism as described in this filing to allow user installation. Grantee is responsible to ensure that only the transmitter as specified in this filing can be used with this device. Section 15.107/15.109 complies with Class A limits. Marketing restriction per section 15.3(h) applied.

Applications

Application IDDatePurpose
aMu5sryqlj/bULZo5kDetA==2004-01-14Original Equipment
Lzg9/dqy6wnwrPt1z+m5UQ==2004-01-14Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.19115C28, CC, CE
5180-5250 MHz0.0415E28, CC, CE
5260-5320 MHz0.05415E28, CC, CE
5745-5825 MHz0.215C28, CC, CE

Grants

TCB Grant - Application Lzg9/dqy6wnwrPt1z+m5UQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 01/14/2004

Application Dated: 01/14/2004
Strix Systems, Inc.
26610 Agoura Road, Suite 110
Calabasas, CA 91302
 
Attention: Alexander Berg , VP, R&D

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RFM-ACCESS-ONE
Name of Grantee:  Strix Systems, Inc.
Equipment Class: Digital Transmission System
Notes: 802.11 a/b/g Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC CE 15C 2412.0  -  2462.0 0.191  
28 CC CE 15C 5745.0  -  5825.0 0.2  

Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Grantee must ensure that installation and use procedures comply with 15.407 integral antenna and indoor-use-only requirements. This device must utilize an EPROM identification mechanism as described in this filing to allow user installation. Grantee is responsible to ensure that only the transmitter as specified in this filing can be used with this device.

Section 15.107/15.109 complies with Class A limits. Marketing restriction per section 15.3(h) applied.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application Lzg9/dqy6wnwrPt1z+m5UQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Strix Systems, Inc.
26610 Agoura Road, Suite 110
Calabasas, CA 91302
United States
  Date of Grant: 01/14/2004

Application Dated: 01/14/2004
 
Attention: Alexander Berg , VP, R&D

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RFM-ACCESS-ONE
Name of Grantee:  Strix Systems, Inc.
Equipment Class: Digital Transmission System
Notes: 802.11 a/b/g Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC CE 15C 2412.0  -  2462.0 0.191  
28 CC CE 15C 5745.0  -  5825.0 0.2  

Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Grantee must ensure that installation and use procedures comply with 15.407 integral antenna and indoor-use-only requirements. This device must utilize an EPROM identification mechanism as described in this filing to allow user installation. Grantee is responsible to ensure that only the transmitter as specified in this filing can be used with this device.

Section 15.107/15.109 complies with Class A limits. Marketing restriction per section 15.3(h) applied.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application aMu5sryqlj/bULZo5kDetA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 01/14/2004

Application Dated: 01/14/2004
Strix Systems, Inc.
26610 Agoura Road, Suite 110
Calabasas, CA 91302
 
Attention: Alexander Berg , VP, R&D

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RFM-ACCESS-ONE
Name of Grantee:  Strix Systems, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC CE 15E 5180.0  -  5250.0 0.04  
28 CC CE 15E 5260.0  -  5320.0 0.054  

Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Grantee must ensure that installation and use procedures comply with 15.407 integral antenna and indoor-use-only requirements. This device must utilize an EPROM identification mechanism as described in this filing to allow user installation. Grantee is responsible to ensure that only the transmitter as specified in this filing can be used with this device.

Section 15.107/15.109 complies with Class A limits. Marketing restriction per section 15.3(h) applied.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application aMu5sryqlj/bULZo5kDetA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Strix Systems, Inc.
26610 Agoura Road, Suite 110
Calabasas, CA 91302
United States
  Date of Grant: 01/14/2004

Application Dated: 01/14/2004
 
Attention: Alexander Berg , VP, R&D

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RFM-ACCESS-ONE
Name of Grantee:  Strix Systems, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC CE 15E 5180.0  -  5250.0 0.04  
28 CC CE 15E 5260.0  -  5320.0 0.054  

Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Grantee must ensure that installation and use procedures comply with 15.407 integral antenna and indoor-use-only requirements. This device must utilize an EPROM identification mechanism as described in this filing to allow user installation. Grantee is responsible to ensure that only the transmitter as specified in this filing can be used with this device.

Section 15.107/15.109 complies with Class A limits. Marketing restriction per section 15.3(h) applied.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: