FCC ID RFM-ACCESS-ONE-2

802.11 a/g Wireless, Mesh Type Networking Device

by Strix Systems, Inc.

Grantee Code: RFM   Product Code: ACCESSONE2
Latest application date: 2006-04-14

FCC ID Device Details

FCC IDRFM-ACCESS-ONE-2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRFM
Product CodeACCESSONE2
Applicant BusinessStrix Systems, Inc. 🇺🇸
Related Domains strixsystems.com
Equipment Class802.11 a/g Wireless, Mesh Type Networking Device
Test FirmMicom Labs

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5260-5320 MHzOriginal Equipment2006-04-14
2412-2462 MHzOriginal Equipment2006-04-14

Exhibits

DocumentTypeAvailableFile
Field Installation GuideUsers Manual2006-04-14PDF 1.2 MB
User Guide Part 1Users Manual2006-04-14PDF 1.7 MB
User Guide Part 2Users Manual2006-04-14PDF 2.5 MB
User Guide Part 3Users Manual2006-04-14PDF 1.4 MB
User Guide Part 4Users Manual2006-04-14PDF 2.3 MB
External PhotosExternal Photos2006-04-14PDF 83.8 KB
ID Label InfoID Label/Location Info2006-04-14PDF 131.8 KB
ID Label Location InfoID Label/Location Info2006-04-14PDF 653.1 KB
Test Setup PhotosTest Setup Photos2006-04-14PDF 595.3 KB
Test Report Metadata onlyTest Report2006-04-14PDF 1.7 MB
Test Report Metadata onlyTest Report2006-04-14PDF 2.6 MB
revised Test ReportTest Report2006-04-14PDF 1.7 MB
revised Test ReportTest Report2006-04-14PDF 2.6 MB
Confidentiality RequestCover Letter(s)2006-04-14PDF 685 KB
Request for ConfidentialityCover Letter(s)2006-04-14PDF 685 KB
MPE CalculationsRF Exposure Info2006-04-14PDF 33.3 KB
MPE CalculationsRF Exposure Info2006-04-14PDF 33 KB
RF Exposure StatementRF Exposure Info2006-04-14PDF 108.4 KB
Internal Photos Metadata onlyInternal PhotosPDF 2.7 MB
Block Diagram Metadata onlyBlock DiagramPDF 100.4 KB
Schematics Metadata onlySchematicsPDF 474.3 KB
Antenna Patterns Metadata onlyOperational DescriptionPDF 165.3 KB
Board Description Metadata onlyOperational DescriptionPDF 12.2 KB
Description of RF Transmission Operation Metadata onlyOperational DescriptionPDF 63.7 KB
General Description Metadata onlyOperational DescriptionPDF 107.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 73.6 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 80.6 KB

Application Information

Application IDsnyPstUKVbSIF81E0Id3dQ==
Final Action Date2006-04-14
Application PurposeOriginal Equipment
Applicant FRN0009500968
ModelACCESS-ONE-2
Frequency Range5260-5320 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11 a/g Wireless, Mesh Type Networking Device
Responsible PartyAlexander Berg, VP, R&D;, alex.berg@strixsystems.com , 818-251-1042
Test FirmGordon Hurst, Micom Labs, gordon_hurst@micomlabs.com , 925-462-0304
TCB Emailemc.cert@emcc.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is peak conducted. This device, including its antenna(s), must be professionally installed as specified in this filing for meeting RF exposure compliance requirements. The antenna(s) used for this transmitter must be must be fixed-mounted on outdoor permanent structures and installed to provide a separation distance of at least 200 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC 06-12 transition period.

Applications

Application IDDatePurpose
snyPstUKVbSIF81E0Id3dQ==2006-04-14Original Equipment
8E2FvKPI1lakkrnOcBTwpA==2006-04-14Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.98915C20, 36, CC
5260-5320 MHz0.229000015E20, 36, CC
5745-5825 MHz0.98915C20, 36, CC

Grants

TCB Grant - Application snyPstUKVbSIF81E0Id3dQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  EMCCons DR RASEK GmbH & Co. KG
Stoernhofer Berg 15
Unterleinleiter, 91364
Germany
Date of Grant: 04/14/2006

Application Dated: 04/14/2006
Strix Systems, Inc.
26610 Agoura Road, Suite 110
Calabasas, CA 91302
 
Attention: Alexander Berg , VP, R&D

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RFM-ACCESS-ONE-2
Name of Grantee:  Strix Systems, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/g Wireless, Mesh Type Networking Device
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 36 CC 15E 5260.0  -  5320.0 0.229  

Power output listed is peak conducted. This device, including its antenna(s), must be professionally installed as specified in this filing for meeting RF exposure compliance requirements. The antenna(s) used for this transmitter must be must be fixed-mounted on outdoor permanent structures and installed to provide a separation distance of at least 200 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC 06-12 transition period.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application snyPstUKVbSIF81E0Id3dQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Strix Systems, Inc.
26610 Agoura Road, Suite 110
Calabasas, CA 91302
United States
  Date of Grant: 04/14/2006

Application Dated: 04/14/2006
 
Attention: Alexander Berg , VP, R&D

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RFM-ACCESS-ONE-2
Name of Grantee:  Strix Systems, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/g Wireless, Mesh Type Networking Device
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 36 CC 15E 5260.0  -  5320.0 0.229  

Power output listed is peak conducted. This device, including its antenna(s), must be professionally installed as specified in this filing for meeting RF exposure compliance requirements. The antenna(s) used for this transmitter must be must be fixed-mounted on outdoor permanent structures and installed to provide a separation distance of at least 200 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC 06-12 transition period.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8E2FvKPI1lakkrnOcBTwpA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  EMCCons DR RASEK GmbH & Co. KG
Stoernhofer Berg 15
Unterleinleiter, 91364
Germany
Date of Grant: 04/14/2006

Application Dated: 04/14/2006
Strix Systems, Inc.
26610 Agoura Road, Suite 110
Calabasas, CA 91302
 
Attention: Alexander Berg , VP, R&D

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RFM-ACCESS-ONE-2
Name of Grantee:  Strix Systems, Inc.
Equipment Class: Digital Transmission System
Notes: 802.11 a/g Wireless, Mesh Type Networking Device
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 36 CC 15C 2412.0  -  2462.0 0.989  
20 36 CC 15C 5745.0  -  5825.0 0.989  

Power output listed is peak conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. Certain antennas must be used with a band pass filter as shown in this filing. This device, including its antenna(s), must be professionally installed as specified in this filing for meeting RF exposure compliance requirements. The antenna(s) used for this transmitter must be must be fixed-mounted on outdoor permanent structures and installed to provide a separation distance of at least 200 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 8E2FvKPI1lakkrnOcBTwpA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Strix Systems, Inc.
26610 Agoura Road, Suite 110
Calabasas, CA 91302
United States
  Date of Grant: 04/14/2006

Application Dated: 04/14/2006
 
Attention: Alexander Berg , VP, R&D

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RFM-ACCESS-ONE-2
Name of Grantee:  Strix Systems, Inc.
Equipment Class: Digital Transmission System
Notes: 802.11 a/g Wireless, Mesh Type Networking Device
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 36 CC 15C 2412.0  -  2462.0 0.989  
20 36 CC 15C 5745.0  -  5825.0 0.989  

Power output listed is peak conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. Certain antennas must be used with a band pass filter as shown in this filing. This device, including its antenna(s), must be professionally installed as specified in this filing for meeting RF exposure compliance requirements. The antenna(s) used for this transmitter must be must be fixed-mounted on outdoor permanent structures and installed to provide a separation distance of at least 200 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: