FCC ID RFM-ACCESS-ONE-23

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

EMCCons DR RASEK GmbH & Co. KG Stoernhofer Berg 15 Unterleinleiter, 91364 Germany

Date of Grant: 01/04/2007 Application Dated: 01/04/2007

Strix Systems, Inc.

26610 Agoura Road, Suite 110

Calabasas, CA 91302

Attention: Alexander Berg , VP, R&D

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	RFM-ACCESS-ONE-23
Name of Grantee:	Strix Systems, Inc.
Equipment Class:	Digital Transmission System
Notes:	802.11 a/g Wireless, Mesh Type Networking Device

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20 36 CC	15C	2412.0  -  2462.0	0.989
20 36 CC	15C	5745.0  -  5825.0	0.989

Power output listed is peak conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. Certain antennas must be used with a band pass filter as shown in this filing. This device, including its antenna(s), must be professionally installed as specified in this filing for meeting RF exposure compliance requirements. The antenna(s) used for this transmitter must be must be fixed-mounted on outdoor permanent structures and installed to provide a separation distance of at least 200 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Strix Systems, Inc. 26610 Agoura Road, Suite 110 Calabasas, CA 91302 United States

Date of Grant: 01/04/2007 Application Dated: 01/04/2007

Attention: Alexander Berg , VP, R&D

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	RFM-ACCESS-ONE-23
Name of Grantee:	Strix Systems, Inc.
Equipment Class:	Digital Transmission System
Notes:	802.11 a/g Wireless, Mesh Type Networking Device
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20 36 CC	15C	2412.0  -  2462.0	0.989
20 36 CC	15C	5745.0  -  5825.0	0.989

Power output listed is peak conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. Certain antennas must be used with a band pass filter as shown in this filing. This device, including its antenna(s), must be professionally installed as specified in this filing for meeting RF exposure compliance requirements. The antenna(s) used for this transmitter must be must be fixed-mounted on outdoor permanent structures and installed to provide a separation distance of at least 200 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 0ufyAoBZC/aNiRv4GWN2aA==

EAS Grant - Application 0ufyAoBZC/aNiRv4GWN2aA==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Strix Systems, Inc. 26610 Agoura Road, Suite 110 Calabasas, CA 91302 United States

Date of Grant: 01/09/2007 Application Dated: 11/30/2006

Attention: Alexander Berg , VP, R&D

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	RFM-ACCESS-ONE-23
Name of Grantee:	Strix Systems, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/g Wireless, Mesh Type Networking Device
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15E	5260.0  -  5320.0	0.229

Power output listed is peak conducted. This device, including its antenna(s), must be professionally installed as specified in this filing for meeting RF exposure compliance requirements. The antenna(s) used for this transmitter must be must be fixed-mounted on outdoor permanent structures and installed to provide a separation distance of at least 200 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC 06-12 transition period.

Mail To:

Philip Littlewood,

EMCCert DR RASEK GmbH

Moggast, Boelwiese 5

Ebermannstadt, 91320

Germany