FCC ID RG9SABER
SABER
by Nonin Medical, Inc.
Grantee Code: RG9 Product Code: SABER
Latest application date: 2014-03-04
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2014-03-04 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2010-12-21 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2010-11-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2010-08-17 |
| 2402-2480 MHz | Original Equipment | 2008-05-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2014-03-04 | PDF 3.3 MB |
| User Manual | Users Manual | 2010-11-12 | PDF 5.3 MB |
| User Manual | Users Manual | 2010-08-17 | PDF 5.8 MB |
| Users Manual Additional Info | Users Manual | 2008-05-26 | PDF 53.4 KB |
| Users Manual Info | Users Manual | 2008-05-26 | PDF 52.7 KB |
| Internal Photos | Internal Photos | 2010-11-12 | PDF 280.4 KB |
| Internal Photos | Internal Photos | 2010-08-17 | PDF 311.4 KB |
| Internal Photos | Internal Photos | 2008-05-26 | PDF 296.1 KB |
| External Photos | External Photos | 2014-03-04 | PDF 192.6 KB |
| External Photos | External Photos | 2010-11-12 | PDF 105.1 KB |
| External Photos | External Photos | 2010-08-17 | PDF 102.3 KB |
| External Photos | External Photos | 2008-05-26 | PDF 296.1 KB |
| ID Label | ID Label/Location Info | 2014-03-04 | PDF 1.2 MB |
| ID Label | ID Label/Location Info | 2010-11-12 | PDF 1 MB |
| ID Label | ID Label/Location Info | 2010-08-17 | PDF 676.1 KB |
| Label Information | ID Label/Location Info | 2008-05-26 | PDF 274.2 KB |
| Test Setup PHotos | Test Setup Photos | 2014-03-04 | PDF 191 KB |
| Test Setup Photos | Test Setup Photos | 2010-12-21 | PDF 819.3 KB |
| Test Setup Photos | Test Setup Photos | 2010-11-12 | PDF 1.2 MB |
| Test Setup Photos | Test Setup Photos | 2010-08-17 | PDF 1.1 MB |
| Additional Fixture Photos | Test Setup Photos | 2008-05-26 | PDF 259.1 KB |
| Test Photos Revised | Test Setup Photos | 2008-05-26 | PDF 1.6 MB |
| Test report | Test Report | 2014-03-04 | PDF 409.9 KB |
| Test Report | Test Report | 2010-12-21 | PDF 244.5 KB |
| Test Report | Test Report | 2010-11-12 | PDF 383.3 KB |
| Test Report | Test Report | 2010-08-17 | PDF 389.4 KB |
| Test Report Revised | Test Report | 2008-05-26 | PDF 2.6 MB |
| Compliance Opinion | Cover Letter(s) | 2014-03-04 | PDF 20.2 KB |
| Cover letter | Cover Letter(s) | 2014-03-04 | PDF 184.6 KB |
| Compliance Opinion | Cover Letter(s) | 2010-12-21 | PDF 16.5 KB |
| Cover letter | Cover Letter(s) | 2010-12-21 | PDF 31.4 KB |
| Compliance Opinion | Cover Letter(s) | 2010-11-12 | PDF 16.3 KB |
| Cover letter | Cover Letter(s) | 2010-11-12 | PDF 23.3 KB |
| Compliance Opinion | Cover Letter(s) | 2010-08-17 | PDF 16.3 KB |
| Cover letter | Cover Letter(s) | 2010-08-17 | PDF 161.3 KB |
| Agent Letter | Cover Letter(s) | 2008-05-26 | PDF 90.4 KB |
| Comments and Response 1 | Cover Letter(s) | 2008-05-26 | PDF 31.9 KB |
| Comments and Response 2 | Cover Letter(s) | 2008-05-26 | PDF 26.9 KB |
| Confidentiality Letter | Cover Letter(s) | 2008-05-26 | PDF 31 KB |
| Modular Approval Additional Letter 1 | Cover Letter(s) | 2008-05-26 | PDF 53.4 KB |
| Modular Approval Additional Letter 2 | Cover Letter(s) | 2008-05-26 | PDF 21 KB |
| Modular Approval Letter 1 | Cover Letter(s) | 2008-05-26 | PDF 29.9 KB |
| Antenna Gain Info | RF Exposure Info | 2008-05-26 | PDF 9.5 KB |
| RF Exposure Info 1 | RF Exposure Info | 2008-05-26 | PDF 40.9 KB |
Application Information
| Application ID | bRvPqb+SyvuFkkQTTRneeQ== |
|---|---|
| Final Action Date | 2014-03-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0009448747 |
| Model | SABER |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | SABER |
| Responsible Party | Brodie Pedersen, Senior Regulatory Engineer, Brodie.Pedersen@nonin.com  , 763-577-3180 |
| Test Firm | Greg Kiemel, Northwest EMC, Inc., gkiemel@nwemc.com  , 503-844-4066 |
| TCB Email | dghizzone@nwemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval (LMA). Power Output listed is conducted. This device must transmit with a source-based time-averaging duty factor not exceeding 68%. Approval is limited to installation only within Nonin Medical devices. Only the antennas documented in the filing are approved for use with this device. Compliance of this device in all final host configurations is the responsibility of the Grantee. Information must not be provided to the end user regarding how to install or remove this RF module. This device must not be collocated or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Limited Single Modular |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| bRvPqb+SyvuFkkQTTRneeQ== | 2014-03-04 | Class II permissive change or modification of presently authorized equipment |
| 3PJ/QNRXhL8IUaAAQHPI7g== | 2010-12-21 | Class II permissive change or modification of presently authorized equipment |
| p5efg5mCL7TZIf8y7BZzdQ== | 2010-11-12 | Class II permissive change or modification of presently authorized equipment |
| 1j9U8BWoRCzazTSvVveXGA== | 2010-08-17 | Class II permissive change or modification of presently authorized equipment |
| zyhc5hgBxLW7tPc4kKJ0Hw== | 2008-05-26 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0245000 | 15C |
Grants
TCB Grant - Application zyhc5hgBxLW7tPc4kKJ0Hw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/26/2008 Application Dated: 05/22/2008 |
| Nonin Medical, Inc. |
| 13700 1st Avenue North |
| Plymouth, MN 55441-5443 |
| Attention: Brodie Pedersen , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RG9SABER |
| Name of Grantee: | Nonin Medical, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Communications Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0245 |
| Limited Modular Approval (LMA). Power Output listed is conducted. This device must transmit with a source-based time-averaging duty factor not exceeding 68%. Approval is limited to installation only within Nonin Medical devices. Only the antennas documented in the filing are approved for use with this device. Compliance of this device in all final host configurations is the responsibility of the Grantee. Information must not be provided to the end user regarding how to install or remove this RF module. This device must not collocated or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| Limited Single Modular |
EAS Grant - Application zyhc5hgBxLW7tPc4kKJ0Hw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nonin Medical, Inc. 13700 1st Avenue North Plymouth, MN 55441-5443 United States |
Date of Grant: 05/26/2008 Application Dated: 05/22/2008 |
| Attention: Brodie Pedersen , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RG9SABER |
| Name of Grantee: | Nonin Medical, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Communications Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0245 |
| Limited Modular Approval (LMA). Power Output listed is conducted. This device must transmit with a source-based time-averaging duty factor not exceeding 68%. Approval is limited to installation only within Nonin Medical devices. Only the antennas documented in the filing are approved for use with this device. Compliance of this device in all final host configurations is the responsibility of the Grantee. Information must not be provided to the end user regarding how to install or remove this RF module. This device must not collocated or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| Limited Single Modular |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 11/12/2010 Application Dated: 11/12/2010 |
| Nonin Medical, Inc. |
| 13700 1st Avenue North |
| Plymouth, MN 55441-5443 |
| Attention: Brodie Pedersen , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RG9SABER |
| Name of Grantee: | Nonin Medical, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SABER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0245 |
| Limited Modular Approval (LMA). Power Output listed is conducted. This device must transmit with a source-based time-averaging duty factor not exceeding 68%. Approval is limited to installation only within Nonin Medical devices. Only the antennas documented in the filing are approved for use with this device. Compliance of this device in all final host configurations is the responsibility of the Grantee. Information must not be provided to the end user regarding how to install or remove this RF module. This device must not be collocated or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
EAS Grant - Application p5efg5mCL7TZIf8y7BZzdQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nonin Medical, Inc. 13700 1st Avenue North Plymouth, MN 55441-5443 United States |
Date of Grant: 11/12/2010 Application Dated: 11/12/2010 |
| Attention: Brodie Pedersen , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RG9SABER |
| Name of Grantee: | Nonin Medical, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SABER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0245 |
| Limited Modular Approval (LMA). Power Output listed is conducted. This device must transmit with a source-based time-averaging duty factor not exceeding 68%. Approval is limited to installation only within Nonin Medical devices. Only the antennas documented in the filing are approved for use with this device. Compliance of this device in all final host configurations is the responsibility of the Grantee. Information must not be provided to the end user regarding how to install or remove this RF module. This device must not be collocated or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 03/04/2014 Application Dated: 03/04/2014 |
| Nonin Medical, Inc. |
| 13700 1st Avenue North |
| Plymouth, MN 55441-5443 |
| Attention: Brodie Pedersen , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RG9SABER |
| Name of Grantee: | Nonin Medical, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SABER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0245 |
| Limited Modular Approval (LMA). Power Output listed is conducted. This device must transmit with a source-based time-averaging duty factor not exceeding 68%. Approval is limited to installation only within Nonin Medical devices. Only the antennas documented in the filing are approved for use with this device. Compliance of this device in all final host configurations is the responsibility of the Grantee. Information must not be provided to the end user regarding how to install or remove this RF module. This device must not be collocated or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Limited Single Modular |
EAS Grant - Application bRvPqb+SyvuFkkQTTRneeQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nonin Medical, Inc. 13700 1st Avenue North Plymouth, MN 55441-5443 United States |
Date of Grant: 03/04/2014 Application Dated: 03/04/2014 |
| Attention: Brodie Pedersen , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RG9SABER |
| Name of Grantee: | Nonin Medical, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SABER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0245 |
| Limited Modular Approval (LMA). Power Output listed is conducted. This device must transmit with a source-based time-averaging duty factor not exceeding 68%. Approval is limited to installation only within Nonin Medical devices. Only the antennas documented in the filing are approved for use with this device. Compliance of this device in all final host configurations is the responsibility of the Grantee. Information must not be provided to the end user regarding how to install or remove this RF module. This device must not be collocated or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Limited Single Modular |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 12/21/2010 Application Dated: 12/21/2010 |
| Nonin Medical, Inc. |
| 13700 1st Avenue North |
| Plymouth, MN 55441-5443 |
| Attention: Brodie Pedersen , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RG9SABER |
| Name of Grantee: | Nonin Medical, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SABER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0245 |
| Limited Modular Approval (LMA). Power Output listed is conducted. This device must transmit with a source-based time-averaging duty factor not exceeding 68%. Approval is limited to installation only within Nonin Medical devices. Only the antennas documented in the filing are approved for use with this device. Compliance of this device in all final host configurations is the responsibility of the Grantee. Information must not be provided to the end user regarding how to install or remove this RF module. This device must not be collocated or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Limited Single Modular |
EAS Grant - Application 3PJ/QNRXhL8IUaAAQHPI7g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nonin Medical, Inc. 13700 1st Avenue North Plymouth, MN 55441-5443 United States |
Date of Grant: 12/21/2010 Application Dated: 12/21/2010 |
| Attention: Brodie Pedersen , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RG9SABER |
| Name of Grantee: | Nonin Medical, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SABER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0245 |
| Limited Modular Approval (LMA). Power Output listed is conducted. This device must transmit with a source-based time-averaging duty factor not exceeding 68%. Approval is limited to installation only within Nonin Medical devices. Only the antennas documented in the filing are approved for use with this device. Compliance of this device in all final host configurations is the responsibility of the Grantee. Information must not be provided to the end user regarding how to install or remove this RF module. This device must not be collocated or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Limited Single Modular |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 08/17/2010 Application Dated: 08/17/2010 |
| Nonin Medical, Inc. |
| 13700 1st Avenue North |
| Plymouth, MN 55441-5443 |
| Attention: Brodie Pedersen , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RG9SABER |
| Name of Grantee: | Nonin Medical, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SABER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0245 |
| Limited Modular Approval (LMA). Power Output listed is conducted. This device must transmit with a source-based time-averaging duty factor not exceeding 68%. Approval is limited to installation only within Nonin Medical devices. Only the antennas documented in the filing are approved for use with this device. Compliance of this device in all final host configurations is the responsibility of the Grantee. Information must not be provided to the end user regarding how to install or remove this RF module. This device must not be collocated or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Limited Single Modular |
EAS Grant - Application 1j9U8BWoRCzazTSvVveXGA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nonin Medical, Inc. 13700 1st Avenue North Plymouth, MN 55441-5443 United States |
Date of Grant: 08/17/2010 Application Dated: 08/17/2010 |
| Attention: Brodie Pedersen , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RG9SABER |
| Name of Grantee: | Nonin Medical, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SABER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0245 |
| Limited Modular Approval (LMA). Power Output listed is conducted. This device must transmit with a source-based time-averaging duty factor not exceeding 68%. Approval is limited to installation only within Nonin Medical devices. Only the antennas documented in the filing are approved for use with this device. Compliance of this device in all final host configurations is the responsibility of the Grantee. Information must not be provided to the end user regarding how to install or remove this RF module. This device must not be collocated or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Limited Single Modular |
| Mail To: |