FCC ID RHHMD026
802.11 IoT Module
by Philio Technology Corporation
Grantee Code: RHH Product Code: MD026
Latest application date: 2019-06-24
FCC ID Device Details
| FCC ID | RHHMD026 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RHH |
| Product Code | MD026 |
| Applicant Business | Philio Technology Corporation 🇹🇼 |
| Related Domains |  philio-tech.com |
| Equipment Class | 802.11 IoT Module |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2ADWC-AI7697HD Grant Date: 10/25/2017 | 2019-06-24 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2ADWC-AI7697HD Grant Date: 10/25/2017 | 2019-06-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual.pdf | Users Manual | 2019-06-24 | PDF 1.2 MB |
| External Photos.pdf | External Photos | 2019-06-24 | PDF 156.8 KB |
| Label Sample & Label Location.pdf | ID Label/Location Info | 2019-06-24 | PDF 51.6 KB |
| Cover Letter (Agent Authorization).pdf | Cover Letter(s) | 2019-06-24 | PDF 268.8 KB |
| Cover Letter (Change ID Authorization).pdf | Cover Letter(s) | 2019-06-24 | PDF 40.2 KB |
| Cover Letter (Request for Change ID).pdf | Cover Letter(s) | 2019-06-24 | PDF 308.5 KB |
Application Information
| Application ID | nU4hELSwqUk60XHl2MHvhg== |
|---|---|
| Final Action Date | 2019-06-24 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: 2ADWC-AI7697HD Grant Date: 10/25/2017 |
| Applicant FRN | 0022283139 |
| Model | MD026 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11 IoT Module |
| Responsible Party | JAMES HUANG, CEO, JAMES@PHILIO-TECH.COM , 886-229088952 |
| Agent | Andrea Andrea Andrea, Bureau Veritas Consumer Products Services (H.K.) L, andrea.hsia@tw.bureauveritas.com  , 88632600628 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com  , +886-(0)3-260-0884 |
| TCB Email | tcb@us.bureauveritas.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| nU4hELSwqUk60XHl2MHvhg== | 2019-06-24 | Change in identification of presently authorized equipment. Original FCC ID: 2ADWC-AI7697HD Grant Date: 10/25/2017 |
| fLDncEwsvc+ZNqLMBkQb5A== | 2019-06-24 | Change in identification of presently authorized equipment. Original FCC ID: 2ADWC-AI7697HD Grant Date: 10/25/2017 |
Equipment Authorization
Grants
TCB Grant - Application nU4hELSwqUk60XHl2MHvhg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 06/24/2019 Application Dated: 06/24/2019 |
| Philio Technology Corporation |
| 8F., NO. 653-2, |
| ZHONGZHENG RD., XINZHUANG DIST., |
| NEW TAIPEI CITY, 242 Taiwan |
| Attention: JAMES HUANG , CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RHHMD026 |
| Name of Grantee: | Philio Technology Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.026 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.027 |
| Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application nU4hELSwqUk60XHl2MHvhg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philio Technology Corporation 8F., NO. 653-2, ZHONGZHENG RD., XINZHUANG DIST.,P.O. Box , NEW TAIPEI CITY, 242 Taiwan |
Date of Grant: 06/24/2019 Application Dated: 06/24/2019 |
| Attention: JAMES HUANG , CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RHHMD026 |
| Name of Grantee: | Philio Technology Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.026 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.027 |
| Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 06/24/2019 Application Dated: 06/24/2019 |
| Philio Technology Corporation |
| 8F., NO. 653-2, |
| ZHONGZHENG RD., XINZHUANG DIST., |
| NEW TAIPEI CITY, 242 Taiwan |
| Attention: JAMES HUANG , CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RHHMD026 |
| Name of Grantee: | Philio Technology Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.281 |
| Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application fLDncEwsvc+ZNqLMBkQb5A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philio Technology Corporation 8F., NO. 653-2, ZHONGZHENG RD., XINZHUANG DIST.,P.O. Box , NEW TAIPEI CITY, 242 Taiwan |
Date of Grant: 06/24/2019 Application Dated: 06/24/2019 |
| Attention: JAMES HUANG , CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RHHMD026 |
| Name of Grantee: | Philio Technology Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.281 |
| Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |