FCC ID RI7CC864-DUAL
DUAL BAND CDMA/GPS module
by Telit Communications S.p.A.
Grantee Code: RI7 Product Code: CC864DUAL
Latest application date: 2011-03-10
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2011-03-10 |
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2010-03-09 |
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2009-08-04 |
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2008-07-15 |
| 824.7-848.31 MHz | Original Equipment | 2007-11-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2011-03-10 | PDF 957.2 KB |
| User Manual | Users Manual | 2010-03-09 | PDF 1.9 MB |
| Users Manual | Users Manual | 2009-01-10 | PDF 1.2 MB |
| User MAnual | Users Manual | 2008-01-11 | PDF 1.4 MB |
| Internal Photos | Internal Photos | 2010-03-09 | PDF 179.8 KB |
| Internal Photos | Internal Photos | 2010-01-30 | PDF 303.3 KB |
| Internal Photos | Internal Photos | 2009-01-10 | PDF 894.2 KB |
| Internal Photos | Internal Photos | 2008-01-11 | PDF 244.4 KB |
| External Photos | External Photos | 2010-03-09 | PDF 136.4 KB |
| External Photos | External Photos | 2009-01-10 | PDF 2.6 MB |
| External Photos | External Photos | 2008-01-11 | PDF 303.9 KB |
| Label | ID Label/Location Info | 2010-03-09 | PDF 82.5 KB |
| Label Info | ID Label/Location Info | 2008-07-15 | PDF 157.9 KB |
| ID Label Location Info | ID Label/Location Info | 2007-11-27 | PDF 1.1 MB |
| antenna information | Operational Description | 2011-03-10 | PDF 478.2 KB |
| test setup photos | Test Setup Photos | 2011-03-10 | PDF 70.6 KB |
| Test Setup Photos | Test Setup Photos | 2009-08-04 | PDF 185.5 KB |
| Test Setup Photos | Test Setup Photos | 2009-01-10 | PDF 289.2 KB |
| Test Setup Photos | Test Setup Photos | 2008-01-11 | PDF 173.3 KB |
| test report | Test Report | 2011-03-10 | PDF 755.1 KB |
| Report | Test Report | 2010-03-09 | PDF 251.4 KB |
| Test Report | Test Report | 2009-08-04 | PDF 867.8 KB |
| Test Report 1 | Test Report | 2008-07-15 | PDF 1.1 MB |
| Test Report 2 | Test Report | 2008-07-15 | PDF 1.4 MB |
| Annex to Test Report | Test Report | 2007-11-27 | PDF 230.6 KB |
| EMI Test Report | Test Report | 2007-11-27 | PDF 2 MB |
| Test Report | Test Report | 2007-11-27 | PDF 547.1 KB |
| Auhtoization Letter | Cover Letter(s) | 2008-07-15 | PDF 12.4 KB |
| changes letter | Cover Letter(s) | 2011-03-10 | PDF 52.8 KB |
| Authorization Letter | Cover Letter(s) | 2010-03-09 | PDF 94 KB |
| C2PC Letter | Cover Letter(s) | 2010-03-09 | PDF 39 KB |
| TCB Q and A | Cover Letter(s) | 2010-03-09 | PDF 65.5 KB |
| Authorization Letter | Cover Letter(s) | 2009-08-04 | PDF 1.6 MB |
| Cover Letter | Cover Letter(s) | 2009-08-04 | PDF 73.1 KB |
| Request for Confidentiality | Cover Letter(s) | 2009-08-04 | PDF 22.6 KB |
| Class II Letter | Cover Letter(s) | 2008-07-15 | PDF 5.7 MB |
| Request for Confidentiality | Cover Letter(s) | 2008-07-15 | PDF 763.7 KB |
| Authorization Letter | Cover Letter(s) | 2007-11-27 | PDF 1.4 MB |
| Cover Letter | Cover Letter(s) | 2007-11-27 | PDF 167.7 KB |
| Request for Confidentiality | Cover Letter(s) | 2007-11-27 | PDF 1.3 MB |
| MPE calculation | RF Exposure Info | 2011-03-10 | PDF 38.8 KB |
| Antennan Specification | Parts List/Tune Up Info | 2010-03-09 | PDF 60.5 KB |
| RF Exposure | RF Exposure Info | 2009-08-04 | PDF 78.5 KB |
| MPE Calculation | RF Exposure Info | 2008-07-15 | PDF 78.4 KB |
| RF Exposure | RF Exposure Info | 2007-11-27 | PDF 120.5 KB |
Application Information
| Application ID | /BwUcbttT85N7XwJefeK8w== |
|---|---|
| Final Action Date | 2011-03-10 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0020384608 |
| Model | CC864-DUAL |
| Frequency Range | 824.7-848.31 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | DUAL BAND CDMA/GPS module |
| Responsible Party | Brian Tucker, Global VP, Quality, brian.tucker@telit.com  , 1-919-439-7977 |
| Technical Contact | DongWoo Ku, Telit Wireless Solutions Co., Ltd., dwku@telit.com , 82-2-368-4648 |
| Non-Technical Contact | Ken Bednasz, Telit Wireless Solutions Inc., ken.bednasz@telit.com , 919-439-7977 |
| Test Firm | Hyun-ho Kim, Nemko Korea Co.,Ltd., hyunho.kim@nemko.com  , 82-31-322-2333 |
| TCB Email | stuart.beck@nemko.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 5.12 dBi for part 22H and 6.12 dBi for part 24E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. End-users and OEM integrators must be provided with specific information required to satisfy RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| /BwUcbttT85N7XwJefeK8w== | 2011-03-10 | Class II permissive change or modification of presently authorized equipment |
| CN58HLAWdAzz+6a2wQTsrA== | 2010-03-09 | Class II permissive change or modification of presently authorized equipment |
| WdZva18jIfIXAI/6DlRURg== | 2009-08-04 | Class II permissive change or modification of presently authorized equipment |
| df41qnQ2QqWqm4aheouQdQ== | 2008-07-15 | Class II permissive change or modification of presently authorized equipment |
| NjKwHWzHFYRpoLQKoyo7FQ== | 2007-11-27 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application WdZva18jIfIXAI/6DlRURg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 08/04/2009 Application Dated: 08/04/2009 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Trieste, 34010 Italy |
| Attention: Brian Tucker , Global VP, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7CC864-DUAL |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | DUAL BAND CDMA/GPS Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.291 | 2.5 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.75 | 0.274 | 2.5 PM | 1M28F9W |
| Licensed Modular Transmitter. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change to cover the performed modifications as described in this filing. |
EAS Grant - Application WdZva18jIfIXAI/6DlRURg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Trieste, 34010 Italy |
Date of Grant: 08/04/2009 Application Dated: 08/04/2009 |
| Attention: Brian Tucker , Global VP, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7CC864-DUAL |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | DUAL BAND CDMA/GPS Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.291 | 2.5 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.75 | 0.274 | 2.5 PM | 1M28F9W |
| Licensed Modular Transmitter. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change to cover the performed modifications as described in this filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 11/27/2007 Application Dated: 11/27/2007 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Trieste, 34010 Italy |
| Attention: Brian Tucker , Global VP, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7CC864-DUAL |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | DUAL BAND CDMA/GPS Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.29 | 2.5 PM | 1M25F9W | |
| 24E | 1851.25 - 1908.75 | 0.287 | 2.5 PM | 1M25F9W |
| Licensed Modular Transmitter. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application NjKwHWzHFYRpoLQKoyo7FQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Trieste, 34010 Italy |
Date of Grant: 11/27/2007 Application Dated: 11/27/2007 |
| Attention: Brian Tucker , Global VP, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7CC864-DUAL |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | DUAL BAND CDMA/GPS Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.29 | 2.5 PM | 1M25F9W | |
| 24E | 1851.25 - 1908.75 | 0.287 | 2.5 PM | 1M25F9W |
| Licensed Modular Transmitter. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 07/15/2008 Application Dated: 07/14/2008 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Trieste, 34010 Italy |
| Attention: Brian Tucker , Global VP, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7CC864-DUAL |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | DUAL BAND CDMA/GPS Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.303 | 2.5 PM | 1M25F9W | |
| 24E | 1851.25 - 1908.75 | 0.306 | 2.5 PM | 1M25F9W |
| Licensed Modular Transmitter. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Single Modular |
EAS Grant - Application df41qnQ2QqWqm4aheouQdQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Trieste, 34010 Italy |
Date of Grant: 07/15/2008 Application Dated: 07/14/2008 |
| Attention: Brian Tucker , Global VP, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7CC864-DUAL |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | DUAL BAND CDMA/GPS Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.303 | 2.5 PM | 1M25F9W | |
| 24E | 1851.25 - 1908.75 | 0.306 | 2.5 PM | 1M25F9W |
| Licensed Modular Transmitter. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Single Modular |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/09/2010 Application Dated: 03/09/2010 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Trieste, 34010 Italy |
| Attention: Brian Tucker , Global VP, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7CC864-DUAL |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Dual-Band CDMA Module/GPS |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.303 | 2.5 PM | 1M25F9W | |
| 24E | 1851.25 - 1908.75 | 0.306 | 2.5 PM | 1M25F9W |
| Licensed Modular Transmitter. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The maximum antenna gains approved for use with this FCCID are –2.0 dBi Part 22H and -3.0 dBi Part 24E except as described in this filing.. A separate approval is required for portable operating configurations as defined in 2.1093 of the rules or for mobile operating configurations using higher antenna gains. The maximum antenna gains approved for use in this application are 0 dBi Part 22H/24E. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application CN58HLAWdAzz+6a2wQTsrA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Trieste, 34010 Italy |
Date of Grant: 03/09/2010 Application Dated: 03/09/2010 |
| Attention: Brian Tucker , Global VP, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7CC864-DUAL |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Dual-Band CDMA Module/GPS |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.303 | 2.5 PM | 1M25F9W | |
| 24E | 1851.25 - 1908.75 | 0.306 | 2.5 PM | 1M25F9W |
| Licensed Modular Transmitter. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The maximum antenna gains approved for use with this FCCID are –2.0 dBi Part 22H and -3.0 dBi Part 24E except as described in this filing.. A separate approval is required for portable operating configurations as defined in 2.1093 of the rules or for mobile operating configurations using higher antenna gains. The maximum antenna gains approved for use in this application are 0 dBi Part 22H/24E. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko Canada Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 03/10/2011 Application Dated: 03/09/2011 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Trieste, 34010 Italy |
| Attention: Brian Tucker , Global VP, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7CC864-DUAL |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | DUAL BAND CDMA/GPS module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.29 | 2.5 PM | 1M25F9W | |
| 24E | 1851.25 - 1908.75 | 0.287 | 2.5 PM | 1M25F9W |
| Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 5.12 dBi for part 22H and 6.12 dBi for part 24E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. End-users and OEM integrators must be provided with specific information required to satisfy RF exposure compliance. |
EAS Grant - Application /BwUcbttT85N7XwJefeK8w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Trieste, 34010 Italy |
Date of Grant: 03/10/2011 Application Dated: 03/09/2011 |
| Attention: Brian Tucker , Global VP, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7CC864-DUAL |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | DUAL BAND CDMA/GPS module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.29 | 2.5 PM | 1M25F9W | |
| 24E | 1851.25 - 1908.75 | 0.287 | 2.5 PM | 1M25F9W |
| Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 5.12 dBi for part 22H and 6.12 dBi for part 24E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. End-users and OEM integrators must be provided with specific information required to satisfy RF exposure compliance. |
| Mail To: |