FCC ID RI7HE910NAV2

RI7-HE910NAV2, RI7 HE910NAV2, RI7HE910NAV2, RI7HE91ONAV2, RI7HE9I0NAV2, R17HE910NAV2

Telit Communications S.p.A. 2G/3.5G module, HE910-NAG V2, HE910-NA V2 HE910NAV2

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: RI7HE910NAV2 is RI7. The remaining characters of the FCC ID, HE910NAV2, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: 2G/3.5G module, HE910-NAG V2, HE910-NA V2

Application: 2G/3.5G module, HE910-NAG V2, HE910-NA V2
Equipment Class: PCE - PCS Licensed Transmitter held to ear
Short Link: fcc.id/RI7HE910NAV2
Sources: FCC.gov | FCC.report
Registered By: Telit Communications S.p.A. - RI7 (Italy)

App #	Purpose	Date	Unique ID
1	Original Equipment	2013-11-01	HMnPlFWPtOpE+fARK/L4Cg==

Operating Frequencies

Colombia Homologation [?]: RI7HE910NAV2

Frequency Range	Power Output	Tolerance	Emission Designator	Rule Parts	Line Entry
824.2-848.8 MHz	1.901 Watts	0.061ppm	242KGXW	22H	1
824.2-848.8 MHz	838 mW	0.061ppm	247KG7W	22H	2
826.4-846.6 MHz	597 mW	0.017ppm	4M16F9W	22H	6
1.8502-1.9098 GHz	953 mW	0.027ppm	242KGXW	24E	3
1.8502-1.9098 GHz	690 mW	0.027ppm	247KG7W	24E	4
1.8524-1.9076 GHz	532 mW	0.039ppm	4M15F9W	24E	5

Exhibits

Document	Type	Submitted Available
updated RF setup photo	Test Setup Photos Adobe Acrobat PDF (348 kB)	2014-01-07 2014-05-01
updated RF report	Test Report Adobe Acrobat PDF (1093 kB)	2014-01-07 2013-11-01
updated MPE	RF Exposure Info Adobe Acrobat PDF (151 kB)	2014-01-07 2013-11-01
Updated Hardware manual	Users Manual Adobe Acrobat PDF (3142 kB)	2014-01-07 2014-05-01
updated SW manual	Users Manual Adobe Acrobat PDF (3173 kB)	2014-01-07 2014-05-01
Supersede request letter	Cover Letter(s) Adobe Acrobat PDF (48 kB)	2014-01-07 2013-11-01
Label	ID Label/Location Info Adobe Acrobat PDF (615 kB)	2013-11-01 2013-11-01
Internal photo	Internal Photos Adobe Acrobat PDF (179 kB)	2013-11-01 2014-05-01
External photo	External Photos Adobe Acrobat PDF (232 kB)	2013-11-01 2014-05-01
tune up procedure	Parts List/Tune Up Info Adobe Acrobat PDF (1181 kB)	2013-11-01 2013-11-01
Module request letter	Cover Letter(s) Adobe Acrobat PDF (254 kB)	2013-11-01 2013-11-01
Confidentiality request letter	Cover Letter(s) Adobe Acrobat PDF (313 kB)	2013-11-01 2013-11-01
Letter POA	Cover Letter(s) Adobe Acrobat PDF (93 kB)	2013-11-01 2013-11-01
Model declaration	Cover Letter(s) Adobe Acrobat PDF (39 kB)	2013-11-01 2013-11-01
Attestation Statements DoC	Attestation Statements Adobe Acrobat PDF (31 kB)	2013-11-01 2013-11-01
Operational description	Operational Description Adobe Acrobat PDF (1228 kB)	2013-11-01
RF report	Test Report Adobe Acrobat PDF (1137 kB)	2013-11-01 2013-11-01
supersede request letter	Cover Letter(s) Adobe Acrobat PDF (885 kB)	2013-12-01 2013-11-01
User manual	Users Manual Adobe Acrobat PDF (3322 kB)	2013-12-01
Test setup photo	Test Setup Photos Adobe Acrobat PDF (384 kB)	2013-11-01
Block diagram	Block Diagram Adobe Acrobat PDF (307 kB)	2013-11-01
Attestation Statements MPE	RF Exposure Info Adobe Acrobat PDF (156 kB)	2013-12-01 2013-11-01
Schematics	Schematics Adobe Acrobat PDF (169 kB)	2013-11-01
Antenna spec	Operational Description Adobe Acrobat PDF (37 kB)	2013-11-01
Test report	Test Report Adobe Acrobat PDF (1350 kB)	2013-12-01 2013-11-01
Attestation Statements BOM	Parts List/Tune Up Info Adobe Acrobat PDF (193 kB)	2013-11-01

App #	Document	Date
1	[Re-Sent]Generic Email - App generated [Mar 31 2016]	0000-00-00 00:00:00 None
1	Incoming Correspondence generated [Apr 7 2016]	0000-00-00 00:00:00 None
1	[Re-Sent]RT Email Correspondence generated [Dec 31 2015]	0000-00-00 00:00:00 None
1	Incoming Correspondence generated [Jan 4 2016]	0000-00-00 00:00:00 None

App #

Document

Date

[Re-Sent]Generic Email - App generated [Mar 31 2016]

0000-00-00 00:00:00
None

Incoming Correspondence generated [Apr 7 2016]

0000-00-00 00:00:00
None

[Re-Sent]RT Email Correspondence generated [Dec 31 2015]

0000-00-00 00:00:00
None

Incoming Correspondence generated [Jan 4 2016]

0000-00-00 00:00:00
None

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	Telit Communications S.p.A.
FCC Registration Number (FRN):	0020384608
Alphanumeric FCC ID:	RI7HE910NAV2
Unique Application Identifier:	HMnPlFWPtOpE+fARK/L4Cg==
Line one:	Viale Stazione di Prosecco 5/b
City:	Trieste
State:	N/A
Country:	Italy
Zip Code:	34010

TCB Information

TCB Application Email Address:	tcb@siemic.com
TCB Scope:	B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID

Grantee Code:	RI7
Product Code:	HE910NAV2

Person at the applicant's address to receive grant or for contact

Name:	Brian Tucker
Title:	Global VP, Quality

Telephone Number:

1-919-439-7977

Extension:

1002

Fax Number:	1-919-840-0337
Email:	brian.tucker@telit.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: Yes

If so, specify the short-term confidentiality release date (MM/DD/YYYY format): 05/01/2014
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: PCE - PCS Licensed Transmitter held to ear
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	2G/3.5G module, HE910-NAG V2, HE910-NA V2

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Single Modular Approval

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: A Test Lab Techno Corp.

First Name: Eric

Last Name: Chan

Telephone Number:

886-3-2710188

Extension:

Fax Number: 886-3-2710190

E-mail: Eric.Chan@atl-lab.com.tw

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular Approval. Output power listed is maximum conducted at antenna terminal. ERP for part 22 and EIRP for part 24 using the specific antenna as shown within this application. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 7.43dBi for GSM850MHz band, 3dBi for PCS band, 8.45dBi for WCDMA band V, and 3dBi for WCDMA band II.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Brian Tucker

Title of authorized signature:

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035

Date of Grant: 11/01/2013

Application Dated: 11/01/2013

Telit Communications S.p.A.

Viale Stazione di Prosecco 5/b

Trieste, 34010
Italy

Attention: Brian Tucker , Global VP, Quality

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	RI7HE910NAV2

Name of Grantee:	Telit Communications S.p.A.

Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	2G/3.5G module, HE910-NAG V2, HE910-NA V2
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22H	824.2 - 848.8	1.901	0.061 PM	242KGXW
	22H	824.2 - 848.8	0.838	0.061 PM	247KG7W
	24E	1850.2 - 1909.8	0.953	0.027 PM	242KGXW
	24E	1850.2 - 1909.8	0.69	0.027 PM	247KG7W
	24E	1852.4 - 1907.6	0.532	0.039 PM	4M15F9W
	22H	826.4 - 846.6	0.597	0.017 PM	4M16F9W

Single Modular Approval. Output power listed is maximum conducted at antenna terminal. ERP for part 22 and EIRP for part 24 using the specific antenna as shown within this application. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.

End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 7.43dBi for GSM850MHz band, 3dBi for PCS band, 8.45dBi for WCDMA band V, and 3dBi for WCDMA band II.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Telit Communications S.p.A.
Viale Stazione di Prosecco 5/b
Trieste, 34010
Italy

Date of Grant: 11/01/2013

Application Dated: 11/01/2013

Attention: Brian Tucker , Global VP, Quality

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	RI7HE910NAV2

Name of Grantee:	Telit Communications S.p.A.

Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	2G/3.5G module, HE910-NAG V2, HE910-NA V2
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22H	824.2 - 848.8	1.901	0.061 PM	242KGXW
	22H	824.2 - 848.8	0.838	0.061 PM	247KG7W
	24E	1850.2 - 1909.8	0.953	0.027 PM	242KGXW
	24E	1850.2 - 1909.8	0.69	0.027 PM	247KG7W
	24E	1852.4 - 1907.6	0.532	0.039 PM	4M15F9W
	22H	826.4 - 846.6	0.597	0.017 PM	4M16F9W

Mail To:

EA973060

FCC ID RI7HE910NAV2

RI7-HE910NAV2, RI7 HE910NAV2, RI7HE910NAV2, RI7HE91ONAV2, RI7HE9I0NAV2, R17HE910NAV2

Telit Communications S.p.A. 2G/3.5G module, HE910-NAG V2, HE910-NA V2 HE910NAV2

Purchase on Amazon: 2G/3.5G module, HE910-NAG V2, HE910-NA V2

Operating Frequencies

Exhibits

Correspondence

Application Forms

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details