FCC ID RI7LE910C1SNX
Module
by Telit Communications S.p.A.
Grantee Code: RI7 Product Code: LE910C1SNX
Latest application date: 2024-03-01
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 1850-1910 MHz | Class II permissive change or modification of presently authorized equipment | 2024-03-01 |
| 699-716 MHz | Original Equipment | 2023-05-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2024-08-28 | PDF 4.2 MB |
| Users Manual | Users Manual | 2023-10-31 | PDF 4.1 MB |
| Internal Photographs 1 | Internal Photos | 2024-08-28 | PDF 723.3 KB |
| Internal Photographs 2 | Internal Photos | 2024-08-28 | PDF 686.3 KB |
| Internal Photographs 1 | Internal Photos | 2023-10-31 | PDF 148.1 KB |
| Internal Photographs 2 | Internal Photos | 2023-10-31 | PDF 152.4 KB |
| External Photographs 1 | External Photos | 2024-08-28 | PDF 571.2 KB |
| External Photographs 2 | External Photos | 2024-08-28 | PDF 548.5 KB |
| External Photographs 1 | External Photos | 2023-10-31 | PDF 148.1 KB |
| External Photographs 2 | External Photos | 2023-10-31 | PDF 152.4 KB |
| FCC ID Label and Location 1 | ID Label/Location Info | 2024-03-01 | PDF 88.7 KB |
| FCC ID Label and Location 2 | ID Label/Location Info | 2024-03-01 | PDF 87.4 KB |
| FCC ID Label and Location 1 | ID Label/Location Info | 2023-05-04 | PDF 140 KB |
| FCC ID Label and Location 2 | ID Label/Location Info | 2023-05-04 | PDF 195.7 KB |
| Test Setup Photographs | Test Setup Photos | 2024-08-28 | PDF 772.8 KB |
| Test Setup Photographs | Test Setup Photos | 2023-10-31 | PDF 606.2 KB |
| MPE Test Report | RF Exposure Info | 2024-03-01 | PDF 247 KB |
| Part 22 Test Report | Test Report | 2024-03-01 | PDF 2.3 MB |
| Part 24 Test Report | Test Report | 2024-03-01 | PDF 3.3 MB |
| Part 27a Test Report 1 | Test Report | 2024-03-01 | PDF 5.4 MB |
| Part 27a Test Report 2 | Test Report | 2024-03-01 | PDF 1.5 MB |
| MPE Test Report | RF Exposure Info | 2023-05-04 | PDF 268.9 KB |
| Part 22 Test Report | Test Report | 2023-05-04 | PDF 2.3 MB |
| Part 24 Test Report | Test Report | 2023-05-04 | PDF 3.4 MB |
| Part 27a Test Report 1 | Test Report | 2023-05-04 | PDF 5.4 MB |
| Part 27a Test Report 2 | Test Report | 2023-05-04 | PDF 1.6 MB |
| Authorization Letter | Attestation Statements | 2024-03-01 | PDF 177.5 KB |
| FCC Agent for Process of Service Attestation | Attestation Statements | 2024-03-01 | PDF 428.9 KB |
| FCC Covered List Attestation | Attestation Statements | 2024-03-01 | PDF 222.2 KB |
| Authorization Letter | Attestation Statements | 2023-05-04 | PDF 529.7 KB |
| FCC Covered List Attestations | Attestation Statements | 2023-05-04 | PDF 117.8 KB |
| Class II Cover Letter | Cover Letter(s) | 2024-03-01 | PDF 175 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2024-03-01 | PDF 180.5 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2023-05-04 | PDF 129 KB |
| Modular Approval Letter | Cover Letter(s) | 2023-05-04 | PDF 540.9 KB |
| Block Diagram 1 Metadata only | Block Diagram | PDF 2 MB | |
| Block Diagram 2 Metadata only | Block Diagram | PDF 2 MB | |
| Schematics 1 Metadata only | Schematics | PDF 2.1 MB | |
| Schematics 2 Metadata only | Schematics | PDF 2.1 MB | |
| Antenna Specification Metadata only | Operational Description | PDF 2.8 MB | |
| Class II Change Description Metadata only | Operational Description | PDF 177.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 1.3 MB | |
| Operational Description 1 Metadata only | Operational Description | PDF 199.6 KB | |
| Operational Description 2 Metadata only | Operational Description | PDF 109 KB | |
| Operational Description 3 Metadata only | Operational Description | PDF 1.1 MB | |
| Parts List 1 Metadata only | Parts List/Tune Up Info | PDF 224.3 KB | |
| Parts List 2 Metadata only | Parts List/Tune Up Info | PDF 225.7 KB | |
| Tune-Up Procedure Metadata only | Parts List/Tune Up Info | PDF 466.8 KB | |
| Tune-Up Procedure Metadata only | Parts List/Tune Up Info | PDF 267.5 KB |
Application Information
| Application ID | viUCb855GvdlobukMP+RQQ== |
|---|---|
| Final Action Date | 2024-03-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0020384608 |
| Model | LE910C1SNX |
| Frequency Range | 1850-1910 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | Module |
| Responsible Party | Paolomaria Schiratti, VP Global Certification, paolomaria.schiratti@telit.com  , +390404192111 |
| Test Firm | Randy Ortanez, Element Materials Technology Washington DC LLC, randy@pctestlab.com  , 410-290-6652 |
| TCB Email | tcb@element.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/28/2024 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to update LTE Category from Cat. 1 to Cat. 4. Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. This device is to be used only for mobile and fixed application. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM integrators. OEM integrators must ensure that end-users are not provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest antenna gain including cable loss, must not exceed the values specified in this filing. This device supports 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Bands 2 and 66/4; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5 and 12; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| viUCb855GvdlobukMP+RQQ== | 2024-03-01 | Class II permissive change or modification of presently authorized equipment |
| NHlN6sUrvDCYlHTaCgfltg== | 2023-05-04 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules |
|---|---|---|---|---|
| 699-716 MHz | 0.194 | 2.5ppm | 8M96W7D | 27 |
| 699-716 MHz | 0.174 | 2.5ppm | 5M14W7D | 27 |
| 777-787 MHz | 0.184 | 2.5ppm | 8M99W7D | 27 |
| 777-787 MHz | 0.208 | 2.5ppm | 8M97G7D | 27 |
| 777-787 MHz | 0.162 | 2.5ppm | 5M09W7D | 27 |
| 824-849 MHz | 0.156 | 2.5ppm | 9M01W7D | 22H |
| 824-849 MHz | 0.222 | 2.5ppm | 9M02G7D | 22H |
| 824-849 MHz | 0.187 | 2.5ppm | 5M12W7D | 22H |
| 1710-1780 MHz | 0.185 | 2.5ppm | 17M9W7D | 27 |
| 1710-1780 MHz | 0.229 | 2.5ppm | 18M0G7D | 27 |
| 1710-1780 MHz | 0.192 | 2.5ppm | 5M81W7D | 27 |
| 1850-1910 MHz | 0.173 | 2.5ppm | 5M83W7D | 24E |
| 1850-1910 MHz | 0.186 | 2.5ppm | 17M9W7D | 24E |
| 1850-1910 MHz | 0.204 | 2.5ppm | 17M9G7D | 24E |
Grants
TCB Grant - Application viUCb855GvdlobukMP+RQQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Washington DC LLC (formerly PCTEST) 7185 Oakland Mills Road Columbia, MD 21046 |
Date of Grant: 03/01/2024 Application Dated: 02/29/2024 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Sgonico - Trieste, 34010 Italy |
| Attention: Paolomaria Schiratti , VP Global Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7LE910C1SNX |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 699.0 - 716.0 | 0.218 | 2.5 PM | 9M01G7D | |
| 27 | 699.0 - 716.0 | 0.174 | 2.5 PM | 5M14W7D | |
| 27 | 777.0 - 787.0 | 0.208 | 2.5 PM | 8M97G7D | |
| 27 | 777.0 - 787.0 | 0.162 | 2.5 PM | 5M09W7D | |
| 22H | 824.0 - 849.0 | 0.222 | 2.5 PM | 9M02G7D | |
| 22H | 824.0 - 849.0 | 0.187 | 2.5 PM | 5M12W7D | |
| 27 | 1710.0 - 1780.0 | 0.229 | 2.5 PM | 18M0G7D | |
| 27 | 1710.0 - 1780.0 | 0.192 | 2.5 PM | 5M81W7D | |
| 24E | 1850.0 - 1910.0 | 0.204 | 2.5 PM | 17M9G7D | |
| 24E | 1850.0 - 1910.0 | 0.173 | 2.5 PM | 5M83W7D | |
| 27 | 699.0 - 716.0 | 0.194 | 2.5 PM | 8M96W7D | |
| 27 | 777.0 - 787.0 | 0.184 | 2.5 PM | 8M99W7D | |
| 22H | 824.0 - 849.0 | 0.156 | 2.5 PM | 9M01W7D | |
| 27 | 1710.0 - 1780.0 | 0.185 | 2.5 PM | 17M9W7D | |
| 24E | 1850.0 - 1910.0 | 0.186 | 2.5 PM | 17M9W7D |
| Class II Permissive Change to update LTE Category from Cat. 1 to Cat. 4. Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. This device is to be used only for mobile and fixed application. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM integrators. OEM integrators must ensure that end-users are not provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest antenna gain including cable loss, must not exceed the values specified in this filing. This device supports 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Bands 2 and 66/4; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5 and 12; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13. |
EAS Grant - Application viUCb855GvdlobukMP+RQQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Sgonico - Trieste, 34010 Italy |
Date of Grant: 03/01/2024 Application Dated: 02/29/2024 |
| Attention: Paolomaria Schiratti , VP Global Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7LE910C1SNX |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 699.0 - 716.0 | 0.218 | 2.5 PM | 9M01G7D | |
| 27 | 699.0 - 716.0 | 0.174 | 2.5 PM | 5M14W7D | |
| 27 | 777.0 - 787.0 | 0.208 | 2.5 PM | 8M97G7D | |
| 27 | 777.0 - 787.0 | 0.162 | 2.5 PM | 5M09W7D | |
| 22H | 824.0 - 849.0 | 0.222 | 2.5 PM | 9M02G7D | |
| 22H | 824.0 - 849.0 | 0.187 | 2.5 PM | 5M12W7D | |
| 27 | 1710.0 - 1780.0 | 0.229 | 2.5 PM | 18M0G7D | |
| 27 | 1710.0 - 1780.0 | 0.192 | 2.5 PM | 5M81W7D | |
| 24E | 1850.0 - 1910.0 | 0.204 | 2.5 PM | 17M9G7D | |
| 24E | 1850.0 - 1910.0 | 0.173 | 2.5 PM | 5M83W7D | |
| 27 | 699.0 - 716.0 | 0.194 | 2.5 PM | 8M96W7D | |
| 27 | 777.0 - 787.0 | 0.184 | 2.5 PM | 8M99W7D | |
| 22H | 824.0 - 849.0 | 0.156 | 2.5 PM | 9M01W7D | |
| 27 | 1710.0 - 1780.0 | 0.185 | 2.5 PM | 17M9W7D | |
| 24E | 1850.0 - 1910.0 | 0.186 | 2.5 PM | 17M9W7D |
| Class II Permissive Change to update LTE Category from Cat. 1 to Cat. 4. Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. This device is to be used only for mobile and fixed application. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM integrators. OEM integrators must ensure that end-users are not provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest antenna gain including cable loss, must not exceed the values specified in this filing. This device supports 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Bands 2 and 66/4; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5 and 12; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Washington DC LLC (formerly PCTEST) 7185 Oakland Mills Road Columbia, MD 21046 |
Date of Grant: 05/04/2023 Application Dated: 05/02/2023 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Sgonico - Trieste, 34010 Italy |
| Attention: Paolomaria Schiratti , VP Global Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7LE910C1SNX |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 699.0 - 716.0 | 0.218 | 2.5 PM | 9M01G7D | |
| 27 | 699.0 - 716.0 | 0.174 | 2.5 PM | 5M14W7D | |
| 27 | 777.0 - 787.0 | 0.208 | 2.5 PM | 8M97G7D | |
| 27 | 777.0 - 787.0 | 0.162 | 2.5 PM | 5M09W7D | |
| 22H | 824.0 - 849.0 | 0.222 | 2.5 PM | 9M02G7D | |
| 22H | 824.0 - 849.0 | 0.187 | 2.5 PM | 5M12W7D | |
| 27 | 1710.0 - 1780.0 | 0.229 | 2.5 PM | 18M0G7D | |
| 27 | 1710.0 - 1780.0 | 0.192 | 2.5 PM | 5M81W7D | |
| 24E | 1850.0 - 1910.0 | 0.204 | 2.5 PM | 17M9G7D | |
| 24E | 1850.0 - 1910.0 | 0.173 | 2.5 PM | 5M83W7D |
| Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. This device is to be used only for mobile and fixed application. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM integrators. OEM integrators must ensure that end-users are not provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest antenna gain including cable loss, must not exceed the values specified in this filing. This device supports 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Bands 2 and 66/4; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5 and 12; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13. |
EAS Grant - Application NHlN6sUrvDCYlHTaCgfltg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Sgonico - Trieste, 34010 Italy |
Date of Grant: 05/04/2023 Application Dated: 05/02/2023 |
| Attention: Paolomaria Schiratti , VP Global Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7LE910C1SNX |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 699.0 - 716.0 | 0.218 | 2.5 PM | 9M01G7D | |
| 27 | 699.0 - 716.0 | 0.174 | 2.5 PM | 5M14W7D | |
| 27 | 777.0 - 787.0 | 0.208 | 2.5 PM | 8M97G7D | |
| 27 | 777.0 - 787.0 | 0.162 | 2.5 PM | 5M09W7D | |
| 22H | 824.0 - 849.0 | 0.222 | 2.5 PM | 9M02G7D | |
| 22H | 824.0 - 849.0 | 0.187 | 2.5 PM | 5M12W7D | |
| 27 | 1710.0 - 1780.0 | 0.229 | 2.5 PM | 18M0G7D | |
| 27 | 1710.0 - 1780.0 | 0.192 | 2.5 PM | 5M81W7D | |
| 24E | 1850.0 - 1910.0 | 0.204 | 2.5 PM | 17M9G7D | |
| 24E | 1850.0 - 1910.0 | 0.173 | 2.5 PM | 5M83W7D |
| Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. This device is to be used only for mobile and fixed application. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM integrators. OEM integrators must ensure that end-users are not provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest antenna gain including cable loss, must not exceed the values specified in this filing. This device supports 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Bands 2 and 66/4; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5 and 12; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13. |
| Mail To: |