- FCC ID1
- RI72
- RI7LE915A43
FCC ID RI7LE915A4
LTE Module
Grantee Code: RI7 Product Code: LE915A4
Latest application date: 2020-07-30
Additional Linked Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|
| 3550-3700 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AAGMCB410L Grant Date: 07/07/2020 | 2020-07-30 |
Applications
| Application ID | Date | Purpose |
|---|
| 3P1BtZv2Sx1MsGmr73ut+g== | 2020-07-30 | Change in identification of presently authorized equipment. Original FCC ID: 2AAGMCB410L Grant Date: 07/07/2020 |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|
| 3550-3700 MHz | 0.128 | 0.001ppm | 17M9G7D | 96 | EP |
| 3550-3700 MHz | 0.119 | 0.001ppm | 17M9D7W | 96 | EP |
Grants
TCB Grant - Application 3P1BtZv2Sx1MsGmr73ut+g==
| TCB |
GRANT OF EQUIPMENT
AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
|
Date of Grant: 07/30/2020
Application Dated: 07/29/2020
|
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
Trieste, 34010
Italy |
| |
| Attention: Brian Tucker , SVP Quality Assurance |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
RI7LE915A4 |
|
|
| Name of Grantee: |
Telit Communications S.p.A. |
|
|
| Equipment Class: |
Citizens Band End User Devices |
| Notes: |
LTE Module |
| Modular Type: |
Single Modular |
| Grant Notes
| FCC Rule Parts
| Frequency
Range (MHZ)
| Output
Watts
| Frequency
Tolerance
| Emission
Designator
|
| EP |
96 |
3550.0
-
3700.0
|
0.128
|
0.001
PM
|
17M9G7D
|
| EP |
96 |
3550.0
-
3700.0
|
0.119
|
0.001
PM
|
17M9D7W
|
| Power listed is maximum EIRP. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 5/10/15/20 MHz bandwidth modes for LTE B48. |
| EP: |
Output power is Effective Isotropic Radiated Power (EIRP) |
EAS Grant - Application 3P1BtZv2Sx1MsGmr73ut+g==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT
AUTHORIZATION |
COPY |
| Certification |
Telit Communications S.p.A.
Viale Stazione di Prosecco 5/b
Trieste, 34010
Italy
|
|
Date of Grant: 07/30/2020
Application Dated: 07/29/2020
|
| |
| Attention: Brian Tucker , SVP Quality Assurance |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
RI7LE915A4 |
|
|
| Name of Grantee: |
Telit Communications S.p.A. |
|
|
| Equipment Class: |
Citizens Band End User Devices |
| Notes: |
LTE Module |
| Modular Type: |
Single Modular |
| Grant Notes
| FCC Rule Parts
| Frequency
Range (MHZ)
| Output
Watts
| Frequency
Tolerance
| Emission
Designator
|
| EP |
96 |
3550.0
-
3700.0
|
0.128
|
0.001
PM
|
17M9G7D
|
| EP |
96 |
3550.0
-
3700.0
|
0.119
|
0.001
PM
|
17M9D7W
|
| Power listed is maximum EIRP. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 5/10/15/20 MHz bandwidth modes for LTE B48. |
| EP: |
Output power is Effective Isotropic Radiated Power (EIRP) |
www.telit.com/m2m-iot-products
, 1-919-449-78607
, +886-3-2641570