FCC ID RI7SE250B4
Module
by Telit Communications S.p.A.
Grantee Code: RI7 Product Code: SE250B4
Latest application date: 2025-12-09
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2535-2655 MHz | Class II permissive change or modification of presently authorized equipment | 2025-12-09 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-12-09 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2025-12-09 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2025-12-09 |
| 2402-2480 MHz | Original Equipment | 2024-02-07 |
| 663-698 MHz | Original Equipment | 2024-02-07 |
| 5745-5825 MHz | Original Equipment | 2024-02-07 |
| 2402-2480 MHz | Original Equipment | 2024-02-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual (Gerber file) | Users Manual | 2024-08-06 | PDF 2 MB |
| Users Manual 0131rev Metadata only | Users Manual | 2024-08-06 | PDF 3.3 MB |
| Users Manual rev2 | Users Manual | 2024-08-06 | PDF 3.3 MB |
| Internal Photos | Internal Photos | 2026-06-07 | PDF 996.7 KB |
| Internal Photos rev Metadata only | Internal Photos | 2024-08-06 | PDF 910.3 KB |
| Internal Photos rev4 Metadata only | Internal Photos | 2024-08-06 | PDF 961.8 KB |
| Internal Photos rev5 | Internal Photos | 2024-08-06 | PDF 977.6 KB |
| External Photos | External Photos | 2026-06-07 | PDF 915.6 KB |
| External Photos rev | External Photos | 2024-08-06 | PDF 708.3 KB |
| Label Location rev | ID Label/Location Info | 2024-02-07 | PDF 62.2 KB |
| Label Sample rev | ID Label/Location Info | 2024-02-07 | PDF 73.3 KB |
| Test Set Up Photos | Test Setup Photos | 2026-06-07 | PDF 248 KB |
| Test Set Up Photos | Test Setup Photos | 2024-08-06 | PDF 423.4 KB |
| Test Report (DSS) | Test Report | 2025-12-09 | PDF 323.3 KB |
| Test Report (DTS-BT LE) | Test Report | 2025-12-09 | PDF 322.1 KB |
| Test Report (DTS-WLAN) | Test Report | 2025-12-09 | PDF 322.3 KB |
| Test Report (NII) rev | Test Report | 2025-12-09 | PDF 327.9 KB |
| Test Report (Part 22+24+27+90) (4G) | Test Report | 2025-12-09 | PDF 1.3 MB |
| Antenna Datasheet | Test Report | 2024-02-07 | PDF 3 MB |
| Antenna Datasheet (WWAN)_rev | Test Report | 2024-02-07 | PDF 2.3 MB |
| Test Report (DFS) rev | Test Report | 2024-02-07 | PDF 635.3 KB |
| Test Report (DSS) | Test Report | 2024-02-07 | PDF 986.5 KB |
| Test Report (DTS-BT LE) | Test Report | 2024-02-07 | PDF 654.9 KB |
| Test Report (DTS-WLAN) | Test Report | 2024-02-07 | PDF 1.2 MB |
| Test Report (NII) | Test Report | 2024-02-07 | PDF 2.1 MB |
| Test Report (Part 22, 24.27,90)_1 Metadata only | Test Report | 2024-02-07 | PDF 5.5 MB |
| Test Report (Part 22, 24.27,90)_1 rev2 | Test Report | 2024-02-07 | PDF 5.6 MB |
| Test Report (Part 22, 24.27,90)_10 rev2 | Test Report | 2024-02-07 | PDF 5.5 MB |
| Test Report (Part 22, 24.27,90)_11 rev2 | Test Report | 2024-02-07 | PDF 5.7 MB |
| Test Report (Part 22, 24.27,90)_12 rev2 | Test Report | 2024-02-07 | PDF 306.5 KB |
| Test Report (Part 22, 24.27,90)_2 rev2 | Test Report | 2024-02-07 | PDF 5.5 MB |
| Test Report (Part 22, 24.27,90)_3 rev2 | Test Report | 2024-02-07 | PDF 5.7 MB |
| Test Report (Part 22, 24.27,90)_4 rev2 | Test Report | 2024-02-07 | PDF 5.5 MB |
| Test Report (Part 22, 24.27,90)_5 rev2 | Test Report | 2024-02-07 | PDF 5.7 MB |
| Test Report (Part 22, 24.27,90)_6 rev2 | Test Report | 2024-02-07 | PDF 5 MB |
| Test Report (Part 22, 24.27,90)_7 rev2 | Test Report | 2024-02-07 | PDF 5.1 MB |
| Test Report (Part 22, 24.27,90)_8 rev2 | Test Report | 2024-02-07 | PDF 5.5 MB |
| Test Report (Part 22, 24.27,90)_9 rev2 | Test Report | 2024-02-07 | PDF 5.5 MB |
| Attestation (Statements of part 2.911(d)(5)) | Attestation Statements | 2025-12-09 | PDF 162.6 KB |
| Attestation (U.S. local Agent Letter of part 2.911(d)(7)) | Attestation Statements | 2025-12-09 | PDF 210.3 KB |
| Attestation (Channel and Mode Declaration) | Attestation Statements | 2024-02-07 | PDF 152.6 KB |
| Attestation (DFS Client Declaration) | Attestation Statements | 2024-02-07 | PDF 235.7 KB |
| Attestation (Statements of part 2.911(d)(5)) rev | Attestation Statements | 2024-02-07 | PDF 216.2 KB |
| Confidentiality Request (Long term) & (Short term) rev | Cover Letter(s) | 2025-12-09 | PDF 160.2 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2025-12-09 | PDF 182.8 KB |
| Cover Letter (Description of Change) | Cover Letter(s) | 2025-12-09 | PDF 191.1 KB |
| Confidentiality Request rev | Cover Letter(s) | 2024-02-07 | PDF 181 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2024-02-07 | PDF 153.4 KB |
| Cover Letter (KDB 996369 Q&A Declaration letter) | Cover Letter(s) | 2024-02-07 | PDF 360.8 KB |
| Cover Letter (Modular Approval Request) | Cover Letter(s) | 2024-02-07 | PDF 78.5 KB |
| RF Exposure Info rev | RF Exposure Info | 2025-12-09 | PDF 213.1 KB |
| RF Exposure Info (MPE) Metadata only | RF Exposure Info | 2024-02-07 | PDF 211.3 KB |
| RF Exposure Info (MPE) rev | RF Exposure Info | 2024-02-07 | PDF 211.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 267.5 KB | |
| Schematics Metadata only | Schematics | PDF 1.8 MB | |
| Schematics (2GB+16GB) Metadata only | Schematics | PDF 1.8 MB | |
| Schematics (2GB+32GB) Metadata only | Schematics | PDF 1.8 MB | |
| Schematics (3GB+32GB) Metadata only | Schematics | PDF 1.8 MB | |
| Operational Description (WWAN) Metadata only | Operational Description | PDF 84.9 KB | |
| Operational Description (WWAN) rev Metadata only | Operational Description | PDF 84.9 KB | |
| Operational Description rev Metadata only | Operational Description | PDF 498.1 KB | |
| Operational Description rev2 Metadata only | Operational Description | PDF 497.3 KB | |
| Software Operational Description Metadata only | Operational Description | PDF 174.6 KB | |
| Software Operational Description rev Metadata only | Operational Description | PDF 175.2 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 147.6 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 74.8 KB | |
| Tune Up Procedure Metadata only | Parts List/Tune Up Info | PDF 154.2 KB | |
| Tune Up Procedure rev Metadata only | Parts List/Tune Up Info | PDF 159.1 KB |
Application Information
| Application ID | ad9vg3qkX52ZkPc3tNmKXA== |
|---|---|
| Final Action Date | 2025-12-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0020384608 |
| Model | SE250B4 |
| Frequency Range | 2535-2655 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | Module |
| Responsible Party | Paolomaria Schiratti, paolomaria.schiratti@telit.com  , +390404192111 |
| Test Firm | Liu Ken, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, ken.liu@bureauveritas.com  , +886-3-2600609 |
| TCB Email | certification@nacsemc.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | Yes |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ad9vg3qkX52ZkPc3tNmKXA== | 2025-12-09 | Class II permissive change or modification of presently authorized equipment |
| 6DVgCaQHYiCzEN1kRoiNyA== | 2025-12-09 | Class II permissive change or modification of presently authorized equipment |
| 62tBwV+drqjVn1yZKKWnTw== | 2025-12-09 | Class II permissive change or modification of presently authorized equipment |
| 0StTx7DMJ8HJRgQSjdynRQ== | 2025-12-09 | Class II permissive change or modification of presently authorized equipment |
| i08FQv3o9c+uLFedN+8XnQ== | 2024-02-07 | Original Equipment |
| gSac8PJA/MRJC2mwSNE/Jg== | 2024-02-07 | Original Equipment |
| dw44gsTRV/AtJNRWZh+nyQ== | 2024-02-07 | Original Equipment |
| 4BZnhAby+jxm0VXPl+juZg== | 2024-02-07 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 663-698 MHz | 0.15 | 0.006ppm | 8M96D7W | 27 | |
| 663-698 MHz | 0.199 | 0.006ppm | 18M0G7D | 27 | |
| 663-698 MHz | 0.149 | 0.006ppm | 18M0D7W | 27 | |
| 699-716 MHz | 0.189 | 0.006ppm | 8M96G7D | 27 | |
| 699-716 MHz | 0.138 | 0.006ppm | 8M96D7W | 27 | |
| 704-716 MHz | 0.155 | 0.006ppm | 8M95G7D | 27 | |
| 704-716 MHz | 0.126 | 0.006ppm | 8M95D7W | 27 | |
| 777-787 MHz | 0.13 | 0.005ppm | 4M49D7W | 27 | |
| 777-787 MHz | 0.178 | 0.005ppm | 8M94G7D | 27 | |
| 777-787 MHz | 0.094 | 0.005ppm | 8M95D7W | 27 | |
| 788-798 MHz | 0.181 | 0.005ppm | 8M96G7D | 9 | |
| 788-798 MHz | 0.147 | 0.005ppm | 8M97D7W | 9 | |
| 814-824 MHz | 0.18 | 0.005ppm | 1M09D7W | 9 | |
| 814-824 MHz | 0.215 | 0.005ppm | 8M96G7D | 9 | |
| 814-824 MHz | 0.138 | 0.005ppm | 8M97D7W | 9 | |
| 824-849 MHz | 0.184 | 0.005ppm | 2M70D7W | 22H | |
| 824-849 MHz | 0.23 | 0.005ppm | 8M96G7D | 22H | |
| 824-849 MHz | 0.137 | 0.005ppm | 8M97D7W | 22H | |
| 824-849 MHz | 0.174 | 0.005ppm | 4M49D7W | 22H | |
| 824-849 MHz | 0.216 | 0.005ppm | 13M4G7D | 22H | |
| 824-849 MHz | 0.156 | 0.005ppm | 13M4D7W | 22H | |
| 1710-1780 MHz | 0.28 | 0.002ppm | 17M9G7D | 27 | |
| 1710-1780 MHz | 0.225 | 0.002ppm | 18M0D7W | 27 | |
| 1710-1755 MHz | 0.304 | 0.002ppm | 17M9G7D | 27 | |
| 1710-1755 MHz | 0.242 | 0.002ppm | 18M0D7W | 27 | |
| 1850-1915 MHz | 0.264 | 0.002ppm | 17M9G7D | 24E | |
| 1850-1915 MHz | 0.192 | 0.002ppm | 17M9D7W | 24E | |
| 1850-1915 MHz | 0.208 | 0.002ppm | 1M09D7W | 24E | |
| 2402-2480 MHz | 0.0140000 | 15C | CC | ||
| 2402-2480 MHz | 0.004 | 15C | CC | ||
| 2412-2462 MHz | 0.157 | 15C | CC | ||
| 2500-2570 MHz | 0.299 | 0.002ppm | 4M48D7W | 27 | |
| 2500-2570 MHz | 0.361 | 0.002ppm | 17M9G7D | 27 | |
| 2500-2570 MHz | 0.284 | 0.002ppm | 17M9D7W | 27 | |
| 2535-2655 MHz | 0.394 | 0.002ppm | 17M9G7D | 27 | |
| 2535-2655 MHz | 0.33 | 0.002ppm | 17M9D7W | 27 | |
| 5180-5240 MHz | 0.079 | 15E | CC | ||
| 5260-5320 MHz | 0.079 | 15E | CC, ND | ||
| 5500-5720 MHz | 0.078 | 15E | CC, ND | ||
| 5745-5825 MHz | 0.079 | 15E | CC |
Grants
TCB Grant - Application i08FQv3o9c+uLFedN+8XnQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 02/07/2024 Application Dated: 02/01/2024 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Sgonico - Trieste, 34010 Italy |
| Attention: Paolomaria Schiratti , VP Global Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE250B4 |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.157 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Power listed is maximum conducted output power. This device supports 20/40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application i08FQv3o9c+uLFedN+8XnQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Sgonico - Trieste, 34010 Italy |
Date of Grant: 02/07/2024 Application Dated: 02/01/2024 |
| Attention: Paolomaria Schiratti , VP Global Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE250B4 |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.157 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Power listed is maximum conducted output power. This device supports 20/40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 02/07/2024 Application Dated: 02/01/2024 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Sgonico - Trieste, 34010 Italy |
| Attention: Paolomaria Schiratti , VP Global Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE250B4 |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1850.0 - 1910.0 | 0.288 | 0.002 PM | 17M9G7D | |
| 24E | 1850.0 - 1910.0 | 0.229 | 0.002 PM | 17M9D7W | |
| 27 | 1710.0 - 1755.0 | 0.252 | 0.002 PM | 1M09D7W | |
| 27 | 1710.0 - 1755.0 | 0.304 | 0.002 PM | 17M9G7D | |
| 27 | 1710.0 - 1755.0 | 0.242 | 0.002 PM | 18M0D7W | |
| 27 | 2500.0 - 2570.0 | 0.299 | 0.002 PM | 4M48D7W | |
| 27 | 2500.0 - 2570.0 | 0.361 | 0.002 PM | 17M9G7D | |
| 27 | 2500.0 - 2570.0 | 0.284 | 0.002 PM | 17M9D7W | |
| 24E | 1850.0 - 1915.0 | 0.208 | 0.002 PM | 1M09D7W | |
| 24E | 1850.0 - 1915.0 | 0.264 | 0.002 PM | 17M9G7D | |
| 24E | 1850.0 - 1915.0 | 0.192 | 0.002 PM | 17M9D7W | |
| 27 | 2535.0 - 2655.0 | 0.394 | 0.002 PM | 17M9G7D | |
| 27 | 2535.0 - 2655.0 | 0.33 | 0.002 PM | 17M9D7W | |
| 27 | 1710.0 - 1780.0 | 0.28 | 0.002 PM | 17M9G7D | |
| 27 | 1710.0 - 1780.0 | 0.225 | 0.002 PM | 18M0D7W | |
| 22H | 824.0 - 849.0 | 0.184 | 0.005 PM | 2M70D7W | |
| 22H | 824.0 - 849.0 | 0.23 | 0.005 PM | 8M96G7D | |
| 22H | 824.0 - 849.0 | 0.137 | 0.005 PM | 8M97D7W | |
| 27 | 699.0 - 716.0 | 0.189 | 0.006 PM | 8M96G7D | |
| 27 | 699.0 - 716.0 | 0.138 | 0.006 PM | 8M96D7W | |
| 27 | 777.0 - 787.0 | 0.13 | 0.005 PM | 4M49D7W | |
| 27 | 777.0 - 787.0 | 0.178 | 0.005 PM | 8M94G7D | |
| 27 | 777.0 - 787.0 | 0.094 | 0.005 PM | 8M95D7W | |
| 90 | 788.0 - 798.0 | 0.181 | 0.005 PM | 8M96G7D | |
| 90 | 788.0 - 798.0 | 0.147 | 0.005 PM | 8M97D7W | |
| 27 | 704.0 - 716.0 | 0.155 | 0.006 PM | 8M95G7D | |
| 27 | 704.0 - 716.0 | 0.126 | 0.006 PM | 8M95D7W | |
| 22H | 824.0 - 849.0 | 0.174 | 0.005 PM | 4M49D7W | |
| 22H | 824.0 - 849.0 | 0.216 | 0.005 PM | 13M4G7D | |
| 22H | 824.0 - 849.0 | 0.156 | 0.005 PM | 13M4D7W | |
| 90 | 814.0 - 824.0 | 0.18 | 0.005 PM | 1M09D7W | |
| 90 | 814.0 - 824.0 | 0.215 | 0.005 PM | 8M96G7D | |
| 90 | 814.0 - 824.0 | 0.138 | 0.005 PM | 8M97D7W | |
| 27 | 663.0 - 698.0 | 0.15 | 0.006 PM | 8M96D7W | |
| 27 | 663.0 - 698.0 | 0.199 | 0.006 PM | 18M0G7D | |
| 27 | 663.0 - 698.0 | 0.149 | 0.006 PM | 18M0D7W |
| Power listed is maximum EIRP/ERP for above and below 1 GHz respectively. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports LTE Band 2/4/5/7/12/13/14/17/25/26/41/66/71 with support for the following bandwidth modes: 1.4/3/5/10/15/20 MHz for LTE Band 2/4/25/66; 5/10/15/20 MHz for LTE Band 7/41/71; 1.4/3/5/10 MHz for LTE Band 5/12/26(Part 90); 1.4/3/5/10/15 MHz for LTE Band 26(Part 22); 5/10 MHz for LTE Band 13/14/17. |
EAS Grant - Application gSac8PJA/MRJC2mwSNE/Jg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Sgonico - Trieste, 34010 Italy |
Date of Grant: 02/07/2024 Application Dated: 02/01/2024 |
| Attention: Paolomaria Schiratti , VP Global Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE250B4 |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1850.0 - 1910.0 | 0.288 | 0.002 PM | 17M9G7D | |
| 24E | 1850.0 - 1910.0 | 0.229 | 0.002 PM | 17M9D7W | |
| 27 | 1710.0 - 1755.0 | 0.252 | 0.002 PM | 1M09D7W | |
| 27 | 1710.0 - 1755.0 | 0.304 | 0.002 PM | 17M9G7D | |
| 27 | 1710.0 - 1755.0 | 0.242 | 0.002 PM | 18M0D7W | |
| 27 | 2500.0 - 2570.0 | 0.299 | 0.002 PM | 4M48D7W | |
| 27 | 2500.0 - 2570.0 | 0.361 | 0.002 PM | 17M9G7D | |
| 27 | 2500.0 - 2570.0 | 0.284 | 0.002 PM | 17M9D7W | |
| 24E | 1850.0 - 1915.0 | 0.208 | 0.002 PM | 1M09D7W | |
| 24E | 1850.0 - 1915.0 | 0.264 | 0.002 PM | 17M9G7D | |
| 24E | 1850.0 - 1915.0 | 0.192 | 0.002 PM | 17M9D7W | |
| 27 | 2535.0 - 2655.0 | 0.394 | 0.002 PM | 17M9G7D | |
| 27 | 2535.0 - 2655.0 | 0.33 | 0.002 PM | 17M9D7W | |
| 27 | 1710.0 - 1780.0 | 0.28 | 0.002 PM | 17M9G7D | |
| 27 | 1710.0 - 1780.0 | 0.225 | 0.002 PM | 18M0D7W | |
| 22H | 824.0 - 849.0 | 0.184 | 0.005 PM | 2M70D7W | |
| 22H | 824.0 - 849.0 | 0.23 | 0.005 PM | 8M96G7D | |
| 22H | 824.0 - 849.0 | 0.137 | 0.005 PM | 8M97D7W | |
| 27 | 699.0 - 716.0 | 0.189 | 0.006 PM | 8M96G7D | |
| 27 | 699.0 - 716.0 | 0.138 | 0.006 PM | 8M96D7W | |
| 27 | 777.0 - 787.0 | 0.13 | 0.005 PM | 4M49D7W | |
| 27 | 777.0 - 787.0 | 0.178 | 0.005 PM | 8M94G7D | |
| 27 | 777.0 - 787.0 | 0.094 | 0.005 PM | 8M95D7W | |
| 90 | 788.0 - 798.0 | 0.181 | 0.005 PM | 8M96G7D | |
| 90 | 788.0 - 798.0 | 0.147 | 0.005 PM | 8M97D7W | |
| 27 | 704.0 - 716.0 | 0.155 | 0.006 PM | 8M95G7D | |
| 27 | 704.0 - 716.0 | 0.126 | 0.006 PM | 8M95D7W | |
| 22H | 824.0 - 849.0 | 0.174 | 0.005 PM | 4M49D7W | |
| 22H | 824.0 - 849.0 | 0.216 | 0.005 PM | 13M4G7D | |
| 22H | 824.0 - 849.0 | 0.156 | 0.005 PM | 13M4D7W | |
| 90 | 814.0 - 824.0 | 0.18 | 0.005 PM | 1M09D7W | |
| 90 | 814.0 - 824.0 | 0.215 | 0.005 PM | 8M96G7D | |
| 90 | 814.0 - 824.0 | 0.138 | 0.005 PM | 8M97D7W | |
| 27 | 663.0 - 698.0 | 0.15 | 0.006 PM | 8M96D7W | |
| 27 | 663.0 - 698.0 | 0.199 | 0.006 PM | 18M0G7D | |
| 27 | 663.0 - 698.0 | 0.149 | 0.006 PM | 18M0D7W |
| Power listed is maximum EIRP/ERP for above and below 1 GHz respectively. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports LTE Band 2/4/5/7/12/13/14/17/25/26/41/66/71 with support for the following bandwidth modes: 1.4/3/5/10/15/20 MHz for LTE Band 2/4/25/66; 5/10/15/20 MHz for LTE Band 7/41/71; 1.4/3/5/10 MHz for LTE Band 5/12/26(Part 90); 1.4/3/5/10/15 MHz for LTE Band 26(Part 22); 5/10 MHz for LTE Band 13/14/17. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 02/07/2024 Application Dated: 02/01/2024 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Sgonico - Trieste, 34010 Italy |
| Attention: Paolomaria Schiratti , VP Global Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE250B4 |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.079 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.079 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.078 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.079 |
| Power listed is maximum conducted output power. This device supports 20/40/80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application dw44gsTRV/AtJNRWZh+nyQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Sgonico - Trieste, 34010 Italy |
Date of Grant: 02/07/2024 Application Dated: 02/01/2024 |
| Attention: Paolomaria Schiratti , VP Global Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE250B4 |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.079 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.079 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.078 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.079 |
| Power listed is maximum conducted output power. This device supports 20/40/80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 12/09/2025 Application Dated: 12/09/2025 |
| Telit Communications S.p.A. |
| Via Stazione di Prosecco 5/b |
| Sgonico - Trieste, 34010 Italy |
| Attention: Paolomaria Schiratti , VP Global Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE250B4 |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1850.0 - 1910.0 | 0.288 | 0.002 PM | 17M9G7D | |
| 24E | 1850.0 - 1910.0 | 0.229 | 0.002 PM | 17M9D7W | |
| 27 | 1710.0 - 1755.0 | 0.252 | 0.002 PM | 1M09D7W | |
| 27 | 1710.0 - 1755.0 | 0.304 | 0.002 PM | 17M9G7D | |
| 27 | 1710.0 - 1755.0 | 0.242 | 0.002 PM | 18M0D7W | |
| 27 | 2500.0 - 2570.0 | 0.299 | 0.002 PM | 4M48D7W | |
| 27 | 2500.0 - 2570.0 | 0.361 | 0.002 PM | 17M9G7D | |
| 27 | 2500.0 - 2570.0 | 0.284 | 0.002 PM | 17M9D7W | |
| 24E | 1850.0 - 1915.0 | 0.208 | 0.002 PM | 1M09D7W | |
| 24E | 1850.0 - 1915.0 | 0.264 | 0.002 PM | 17M9G7D | |
| 24E | 1850.0 - 1915.0 | 0.192 | 0.002 PM | 17M9D7W | |
| 27 | 2535.0 - 2655.0 | 0.394 | 0.002 PM | 17M9G7D | |
| 27 | 2535.0 - 2655.0 | 0.33 | 0.002 PM | 17M9D7W | |
| 27 | 1710.0 - 1780.0 | 0.28 | 0.002 PM | 17M9G7D | |
| 27 | 1710.0 - 1780.0 | 0.225 | 0.002 PM | 18M0D7W | |
| 22H | 824.0 - 849.0 | 0.184 | 0.005 PM | 2M70D7W | |
| 22H | 824.0 - 849.0 | 0.23 | 0.005 PM | 8M96G7D | |
| 22H | 824.0 - 849.0 | 0.137 | 0.005 PM | 8M97D7W | |
| 27 | 699.0 - 716.0 | 0.189 | 0.006 PM | 8M96G7D | |
| 27 | 699.0 - 716.0 | 0.138 | 0.006 PM | 8M96D7W | |
| 27 | 777.0 - 787.0 | 0.13 | 0.005 PM | 4M49D7W | |
| 27 | 777.0 - 787.0 | 0.178 | 0.005 PM | 8M94G7D | |
| 27 | 777.0 - 787.0 | 0.094 | 0.005 PM | 8M95D7W | |
| 90 | 788.0 - 798.0 | 0.181 | 0.005 PM | 8M96G7D | |
| 90 | 788.0 - 798.0 | 0.147 | 0.005 PM | 8M97D7W | |
| 27 | 704.0 - 716.0 | 0.155 | 0.006 PM | 8M95G7D | |
| 27 | 704.0 - 716.0 | 0.126 | 0.006 PM | 8M95D7W | |
| 22H | 824.0 - 849.0 | 0.174 | 0.005 PM | 4M49D7W | |
| 22H | 824.0 - 849.0 | 0.216 | 0.005 PM | 13M4G7D | |
| 22H | 824.0 - 849.0 | 0.156 | 0.005 PM | 13M4D7W | |
| 90 | 814.0 - 824.0 | 0.18 | 0.005 PM | 1M09D7W | |
| 90 | 814.0 - 824.0 | 0.215 | 0.005 PM | 8M96G7D | |
| 90 | 814.0 - 824.0 | 0.138 | 0.005 PM | 8M97D7W | |
| 27 | 663.0 - 698.0 | 0.15 | 0.006 PM | 8M96D7W | |
| 27 | 663.0 - 698.0 | 0.199 | 0.006 PM | 18M0G7D | |
| 27 | 663.0 - 698.0 | 0.149 | 0.006 PM | 18M0D7W |
| C2PC for adding non-RF related 2nd source pin-to-pin compatible components as described in the filing. Power listed is maximum EIRP/ERP for above and below 1 GHz respectively. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports LTE Band 2/4/5/7/12/13/14/17/25/26/41/66/71 with support for the following bandwidth modes: 1.4/3/5/10/15/20 MHz for LTE Band 2/4/25/66; 5/10/15/20 MHz for LTE Band 7/41/71; 1.4/3/5/10 MHz for LTE Band 5/12/26(Part 90); 1.4/3/5/10/15 MHz for LTE Band 26(Part 22); 5/10 MHz for LTE Band 13/14/17. |
TCB Grant - Application 6DVgCaQHYiCzEN1kRoiNyA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 12/09/2025 Application Dated: 12/09/2025 |
| Telit Communications S.p.A. |
| Via Stazione di Prosecco 5/b |
| Sgonico - Trieste, 34010 Italy |
| Attention: Paolomaria Schiratti , VP Global Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE250B4 |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| C2PC for adding non-RF related 2nd source pin-to-pin compatible components as described in the filing. Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application 62tBwV+drqjVn1yZKKWnTw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 12/09/2025 Application Dated: 12/09/2025 |
| Telit Communications S.p.A. |
| Via Stazione di Prosecco 5/b |
| Sgonico - Trieste, 34010 Italy |
| Attention: Paolomaria Schiratti , VP Global Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE250B4 |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.157 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| C2PC for adding non-RF related 2nd source pin-to-pin compatible components as described in the filing. Power listed is maximum conducted output power. This device supports 20/40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application 4BZnhAby+jxm0VXPl+juZg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 02/07/2024 Application Dated: 02/01/2024 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Sgonico - Trieste, 34010 Italy |
| Attention: Paolomaria Schiratti , VP Global Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE250B4 |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 4BZnhAby+jxm0VXPl+juZg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Sgonico - Trieste, 34010 Italy |
Date of Grant: 02/07/2024 Application Dated: 02/01/2024 |
| Attention: Paolomaria Schiratti , VP Global Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE250B4 |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 12/09/2025 Application Dated: 12/09/2025 |
| Telit Communications S.p.A. |
| Via Stazione di Prosecco 5/b |
| Sgonico - Trieste, 34010 Italy |
| Attention: Paolomaria Schiratti , VP Global Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE250B4 |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.079 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.079 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.078 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.079 |
| C2PC for adding non-RF related 2nd source pin-to-pin compatible components as described in the filing. Power listed is maximum conducted output power. This device supports 20/40/80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |