FCC ID RI7UE910GL

RI7-UE910GL, RI7 UE910GL, RI7UE910GL, RI7UE91OGL, RI7UE9I0GL, R17UE910GL

Telit Communications S.p.A. UE910-GL WWAN module UE910GL

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: RI7UE910GL is RI7. The remaining characters of the FCC ID, UE910GL, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: UE910-GL WWAN module

App # Purpose Date Unique ID
1 Change in Identification 2018-01-10 7crcWkPBQblBDOS2onbXSw==
2 Class II Permissive Change 2018-01-10 18s9eJiA+aTHsH/D1UnaeQ==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: GSM 1900 PCS UP | LTE 2,1900 PCS UP | LTE 25,1900+ UP | LTE 35,TD PCS Lower DOWN | UMTS CH 2 UP | UMTS CH 25 UP | UMTS CH 35 DOWN |
Frequency RangePower OutputToleranceEmission DesignatorRule Parts App #
824.2-848.2 MHz1.995 Watts1ppm240KGXW22H 1.1
824.2-848.2 MHz977 mW1ppm248KG7W22H 1.2
824.2-848.2 MHz1.995 Watts1ppm240KGXW22H 2.1
824.2-848.2 MHz977 mW1ppm248KG7W22H 2.2
826.4-846.6 MHz460 mW1ppm4M07G9W22H 1.5
826.4-846.6 MHz460 mW1ppm4M07G9W22H 2.5
1.7124-1.7526 GHz226 mW1ppm4M07F9W27 1.7
1.8502-1.9098 GHz977 mW1ppm241KGXW24E 1.3
1.8502-1.9098 GHz724 mW1ppm252KG7W24E 1.4
1.8502-1.9098 GHz977 mW1ppm241KGXW24E 2.3
1.8502-1.9098 GHz724 mW1ppm252KG7W24E 2.4
1.8524-1.9076 GHz436 mW1ppm4M10G9W24E 1.6
1.8524-1.9076 GHz436 mW1ppm4M10G9W24E 2.6

Exhibits

Available Exhibits

App #Document Type Submitted
Available
2 C2PC letterCover Letter(s)
Adobe Acrobat PDF (132 kB)
2018-01-10
2018-01-10
2 Users guideUsers Manual
Adobe Acrobat PDF (3919 kB)
2018-01-10
2018-07-09
2 Internal picturesInternal Photos
Adobe Acrobat PDF (271 kB)
2018-01-10
2018-07-09
2 Confidentiality letterCover Letter(s)
Adobe Acrobat PDF (205 kB)
2018-01-10
2018-01-10
2 Telit Authorisation letterCover Letter(s)
Adobe Acrobat PDF (97 kB)
2018-01-10
2018-01-10
2 Agent letterCover Letter(s)
Adobe Acrobat PDF (188 kB)
2018-01-10
2018-01-10
1 Label designID Label/Location Info
Adobe Acrobat PDF (263 kB)
2018-01-10
2018-01-10
1 Telit authorisation letterCover Letter(s)
Adobe Acrobat PDF (97 kB)
2018-01-10
2018-01-10
1 Internal photographsInternal Photos
Adobe Acrobat PDF (271 kB)
2018-01-10
2018-07-09
1 Change of FCC ID letterCover Letter(s)
Adobe Acrobat PDF (145 kB)
2018-01-10
2018-01-10
1 Confidentiality letterCover Letter(s)
Adobe Acrobat PDF (205 kB)
2018-01-10
2018-01-10
1 Agent letterCover Letter(s)
Adobe Acrobat PDF (188 kB)
2018-01-10
2018-01-10
1 External photographsExternal Photos
Adobe Acrobat PDF (247 kB)
2018-01-10
2018-07-09
1 Users guideUsers Manual
Adobe Acrobat PDF (5581 kB)
2018-01-10
2018-07-09

APP # 2 (2018-01-10)

App # Document Type Submitted
Available
2 C2PC letter Cover Letter(s)
Adobe Acrobat PDF (132 kB)
2018-01-10 00:00:00
2018-01-10 00:00:00
2 Users guide Users Manual
Adobe Acrobat PDF (3919 kB)
2018-01-10 00:00:00
2018-07-09 00:00:00
2 Internal pictures Internal Photos
Adobe Acrobat PDF (271 kB)
2018-01-10 00:00:00
2018-07-09 00:00:00
2 Confidentiality letter Cover Letter(s)
Adobe Acrobat PDF (205 kB)
2018-01-10 00:00:00
2018-01-10 00:00:00
2 Telit Authorisation letter Cover Letter(s)
Adobe Acrobat PDF (97 kB)
2018-01-10 00:00:00
2018-01-10 00:00:00
2 Agent letter Cover Letter(s)
Adobe Acrobat PDF (188 kB)
2018-01-10 00:00:00
2018-01-10 00:00:00

APP # 1 (2018-01-10)

App # Document Type Submitted
Available
1 Label design ID Label/Location Info
Adobe Acrobat PDF (263 kB)
2018-01-10 00:00:00
2018-01-10 00:00:00
1 Telit authorisation letter Cover Letter(s)
Adobe Acrobat PDF (97 kB)
2018-01-10 00:00:00
2018-01-10 00:00:00
1 Internal photographs Internal Photos
Adobe Acrobat PDF (271 kB)
2018-01-10 00:00:00
2018-07-09 00:00:00
1 Change of FCC ID letter Cover Letter(s)
Adobe Acrobat PDF (145 kB)
2018-01-10 00:00:00
2018-01-10 00:00:00
1 Confidentiality letter Cover Letter(s)
Adobe Acrobat PDF (205 kB)
2018-01-10 00:00:00
2018-01-10 00:00:00
1 Agent letter Cover Letter(s)
Adobe Acrobat PDF (188 kB)
2018-01-10 00:00:00
2018-01-10 00:00:00
1 External photographs External Photos
Adobe Acrobat PDF (247 kB)
2018-01-10 00:00:00
2018-07-09 00:00:00
1 Users guide Users Manual
Adobe Acrobat PDF (5581 kB)
2018-01-10 00:00:00
2018-07-09 00:00:00
1 Label ID Label/Location Info
Adobe Acrobat PDF (263 kB)
2018-01-10 00:00:00
2018-01-10 00:00:00

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Telit Communications S.p.A.
FCC Registration Number (FRN): 0009643503
Alphanumeric FCC ID: RI7UE910GL
Unique Application Identifier: 7crcWkPBQblBDOS2onbXSw==
Line one: Viale Stazione di Prosecco 5/b
City: Trieste
State: N/A
Country: Italy
Zip Code: 34010

TCB Information
TCB Application Email Address: admin.rcb.es@dekra.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: RI7
Product Code: UE910GL

Person at the applicant's address to receive grant or for contact
Name: Ken Bednasz
Title: VP Application Engineering - Americas
Telephone Number: 1-919-439-7977 Extension: 1104
Fax Number: 1-919-840-0337
Email: Ken.Bednasz@telit.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   07/09/2018
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): UE910-GL WWAN module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Change in identification of presently authorized equipment. Original FCC ID: RI7HE910GL Grant Date: 07/06/2015

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Compliance Certification Services Inc. HsinChu Lab
First Name:   Winnie
Last Name:   Chen
Telephone Number: 886-3-5921698 Extension:
Fax Number:  +886-3-5921108
E-mail:  winnie.chen@ccsrf.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Ouput power is conducted. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Maximum permitted antenna gain/cable loss: 850 MHz: 4.14 dBi, 1700 MHz: 6.30 dBi, 1900 MHz: 3.01 dBi. Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ken Bednasz
Title of authorized signature:  VP Application Engineering - Americas

Complete items below if agent signs the application:

Firm Name:  Dekra Testing and Certification, S.A.U.
Name:  Antonio Antonio Antonio
Line 1:  Antonio
Line 2:  Antonio
P.O. Box:  Antonio
City:  Antonio
State:  Antonio
Country:  Antonio
Zip Code:  Antonio
Telephone Number:  +34952619100
Fax Number:  +34952619113
E-mail:  antonio.olivares@dekra.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Telit Communications S.p.A.
FCC Registration Number (FRN): 0009643503
Alphanumeric FCC ID: RI7UE910GL
Unique Application Identifier: 18s9eJiA+aTHsH/D1UnaeQ==
Line one: Viale Stazione di Prosecco 5/b
City: Trieste
State: N/A
Country: Italy
Zip Code: 34010

TCB Information
TCB Application Email Address: admin.rcb.es@dekra.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: RI7
Product Code: UE910GL

Person at the applicant's address to receive grant or for contact
Name: Ken Bednasz
Title: VP Application Engineering - Americas
Telephone Number: 1-919-439-7977 Extension: 1104
Fax Number: 1-919-840-0337
Email: Ken.Bednasz@telit.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   07/09/2018
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): UE910-GL WWAN module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Compliance Certification Services Inc. HsinChu Lab
First Name:   Winnie
Last Name:   Chen
Telephone Number: 886-3-5921698 Extension:
Fax Number:  +886-3-5921108
E-mail:  winnie.chen@ccsrf.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Ouput power is conducted. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Maximum permitted antenna gain/cable loss: 850 MHz: 4.14 dBi, 1900 MHz: 3.01 dBi. Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ken Bednasz
Title of authorized signature:  VP Application Engineering - Americas

Complete items below if agent signs the application:

Firm Name:  Dekra Testing and Certification, S.A.U.
Name:  Antonio Antonio Antonio
Line 1:  Antonio
Line 2:  Antonio
P.O. Box:  Antonio
City:  Antonio
State:  Antonio
Country:  Antonio
Zip Code:  Antonio
Telephone Number:  +34952619100
Fax Number:  +34952619113
E-mail:  antonio.olivares@dekra.com

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  DEKRA Testing and Certification, S.A.U.
Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6
Campanillas - Malaga, 29590
Spain
Date of Grant: 01/10/2018

Application Dated: 01/10/2018
Telit Communications S.p.A.
Viale Stazione di Prosecco 5/b
Trieste, 34010
Italy
 
Attention: Ken Bednasz , VP Application Engineering - Americas

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RI7UE910GL
Name of Grantee:  Telit Communications S.p.A.
Equipment Class: PCS Licensed Transmitter
Notes: UE910-GL WWAN module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.2 1.995 1.0  PM 240KGXW
22H 824.2  -  848.2 0.977 1.0  PM 248KG7W
24E 1850.2  -  1909.8 0.977 1.0  PM 241KGXW
24E 1850.2  -  1909.8 0.724 1.0  PM 252KG7W
22H 826.4  -  846.6 0.46 1.0  PM 4M07G9W
24E 1852.4  -  1907.6 0.436 1.0  PM 4M10G9W

Ouput power is conducted. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

Maximum permitted antenna gain/cable loss: 850 MHz: 4.14 dBi, 1900 MHz: 3.01 dBi. Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.


COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Telit Communications S.p.A.
Viale Stazione di Prosecco 5/b
Trieste, 34010
Italy
  Date of Grant: 01/10/2018

Application Dated: 01/10/2018
 
Attention: Ken Bednasz , VP Application Engineering - Americas

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RI7UE910GL
Name of Grantee:  Telit Communications S.p.A.
Equipment Class: PCS Licensed Transmitter
Notes: UE910-GL WWAN module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.2 1.995 1.0  PM 240KGXW
22H 824.2  -  848.2 0.977 1.0  PM 248KG7W
24E 1850.2  -  1909.8 0.977 1.0  PM 241KGXW
24E 1850.2  -  1909.8 0.724 1.0  PM 252KG7W
22H 826.4  -  846.6 0.46 1.0  PM 4M07G9W
24E 1852.4  -  1907.6 0.436 1.0  PM 4M10G9W

Ouput power is conducted. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

Maximum permitted antenna gain/cable loss: 850 MHz: 4.14 dBi, 1900 MHz: 3.01 dBi. Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.



Mail To:


EA789201
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  DEKRA Testing and Certification, S.A.U.
Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6
Campanillas - Malaga, 29590
Spain
Date of Grant: 01/10/2018

Application Dated: 01/10/2018
Telit Communications S.p.A.
Viale Stazione di Prosecco 5/b
Trieste, 34010
Italy
 
Attention: Ken Bednasz , VP Application Engineering - Americas

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RI7UE910GL
Name of Grantee:  Telit Communications S.p.A.
Equipment Class: PCS Licensed Transmitter
Notes: UE910-GL WWAN module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.2 1.995 1.0  PM 240KGXW
22H 824.2  -  848.2 0.977 1.0  PM 248KG7W
24E 1850.2  -  1909.8 0.977 1.0  PM 241KGXW
24E 1850.2  -  1909.8 0.724 1.0  PM 252KG7W
22H 826.4  -  846.6 0.46 1.0  PM 4M07G9W
24E 1852.4  -  1907.6 0.436 1.0  PM 4M10G9W
27 1712.4  -  1752.6 0.226 1.0  PM 4M07F9W

Ouput power is conducted.

This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

Maximum permitted antenna gain/cable loss: 850 MHz: 4.14 dBi, 1700 MHz: 6.30 dBi, 1900 MHz: 3.01 dBi. Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.


COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Telit Communications S.p.A.
Viale Stazione di Prosecco 5/b
Trieste, 34010
Italy
  Date of Grant: 01/10/2018

Application Dated: 01/10/2018
 
Attention: Ken Bednasz , VP Application Engineering - Americas

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RI7UE910GL
Name of Grantee:  Telit Communications S.p.A.
Equipment Class: PCS Licensed Transmitter
Notes: UE910-GL WWAN module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.2 1.995 1.0  PM 240KGXW
22H 824.2  -  848.2 0.977 1.0  PM 248KG7W
24E 1850.2  -  1909.8 0.977 1.0  PM 241KGXW
24E 1850.2  -  1909.8 0.724 1.0  PM 252KG7W
22H 826.4  -  846.6 0.46 1.0  PM 4M07G9W
24E 1852.4  -  1907.6 0.436 1.0  PM 4M10G9W
27 1712.4  -  1752.6 0.226 1.0  PM 4M07F9W

Ouput power is conducted.

This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

Maximum permitted antenna gain/cable loss: 850 MHz: 4.14 dBi, 1700 MHz: 6.30 dBi, 1900 MHz: 3.01 dBi. Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.



Mail To:


EA258816

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details