FCC ID RI7UE910NA

FCC ID RI7UE910NA Users-Manual, RI7 UE910NA, RI7UE910NA, RI7UE91ONA, RI7UE9I0NA, R17UE910NA

Telit Communications S.p.A. 2G/3G Module UE910NA

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: RI7UE910NA is RI7. The remaining characters of the FCC ID, UE910NA, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: 2G/3G Module

FCC ID RI7UE910NA Users-Manual
FCC ID RI7UE910NA Users-Manual
FCC ID RI7UE910NA Users-Manual
FCC ID RI7UE910NA Users-Manual
FCC ID RI7UE910NA Users-Manual
FCC ID RI7UE910NA Users-Manual
FCC ID RI7UE910NA Users-Manual
FCC ID RI7UE910NA Users-Manual
FCC ID RI7UE910NA Users-Manual
FCC ID RI7UE910NA Users-Manual
FCC ID RI7UE910NA Users-Manual
FCC ID RI7UE910NA Users-Manual
FCC ID RI7UE910NA Users-Manual

*Please Check Individual Documents for more images

App # Purpose Date Unique ID
1 Original Equipment 2013-04-26 arDKxpO1TV65yejO0A46xw==
2 Original Equipment 2013-04-26 n/QvxyW5hsaCgijpUXVHUg==
3 Class II Permissive Change 2016-02-22 ZQATsJPCaPTDV/+YzhW5jw==
4 Class II Permissive Change 2016-11-03 H1ZM7F0E+A9rZsUtAL2wwg==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: GSM 1900 PCS UP | LTE 2,1900 PCS UP | LTE 25,1900+ UP | LTE 35,TD PCS Lower DOWN | UMTS CH 2 UP | UMTS CH 25 UP | UMTS CH 35 DOWN |
Frequency RangePower OutputToleranceEmission DesignatorRule Parts App #
15B 1.1
824.2-848.8 MHz1.91 Watts2.5ppm248KGXW22H 2.1
824.2-848.8 MHz850 mW2.5ppm248KG7W22H 2.2
824.2-848.8 MHz1.27 Watts2.5ppm248KGXW22H 3.1
824.2-848.8 MHz1.27 Watts2.5ppm248KGXW22H 4.1
826.4-846.6 MHz660 mW2.5ppm4M21F9W22H 2.3
826.4-846.6 MHz250 mW2.5ppm4M21F9W22H 3.2
826.4-846.6 MHz250 mW2.5ppm4M21F9W22H 4.2
1.8502-1.9098 GHz850 mW2.5ppm246KGXW24E 2.4
1.8502-1.9098 GHz620 mW2.5ppm247KG7W24E 2.5
1.8502-1.9098 GHz600 mW2.5ppm246KGXW24E 3.3
1.8502-1.9098 GHz600 mW2.5ppm246KGXW24E 4.3
1.8524-1.9076 GHz470 mW2.5ppm4M20F9W24E 2.6
1.8524-1.9076 GHz440 mW2.5ppm4M20F9W24E 3.4
1.8524-1.9076 GHz440 mW2.5ppm4M20F9W24E 4.4

Exhibits

Available Exhibits

App #Document Type Submitted
Available
4 Test Setup PhotosTest Setup Photos
Adobe Acrobat PDF (223 kB)		 2016-11-02
2016-11-03
4 ID Label/Location InfoID Label/Location Info
Adobe Acrobat PDF (41 kB)		 2016-11-02
2016-11-03
4 External photoExternal Photos
Adobe Acrobat PDF (97 kB)		 2016-11-02
2016-11-03
4 Users ManualUsers Manual
Adobe Acrobat PDF (2614 kB)		 2016-11-02
2016-11-03
4 Test ReportTest Report
Adobe Acrobat PDF (1374 kB)		 2016-11-02
2016-11-03
4 RF Exposure InfoRF Exposure Info
Adobe Acrobat PDF (17 kB)		 2016-11-02
2016-11-03
4 Declaration of authorizationCover Letter(s)
Adobe Acrobat PDF (57 kB)		 2016-11-02
2016-11-03
4 Cover letterCover Letter(s)
Adobe Acrobat PDF (64 kB)		 2016-11-02
2016-11-03
4 Authorization letter permissionCover Letter(s)
Adobe Acrobat PDF (180 kB)		 2016-11-02
2016-11-03
3 Test ReportTest Report
Adobe Acrobat PDF (1323 kB)		 2016-02-18
2016-02-22
3 RF Exposure InfoRF Exposure Info
Adobe Acrobat PDF (18 kB)		 2016-02-18
2016-02-22
3 Declaration of AuthorizationCover Letter(s)
Adobe Acrobat PDF (57 kB)		 2016-02-18
2016-02-22
3 Class II permissive change letter for FCCCover Letter(s)
Adobe Acrobat PDF (64 kB)		 2016-02-18
2016-02-22
3 Authorization LetterCover Letter(s)
Adobe Acrobat PDF (429 kB)		 2016-02-18
2016-02-22
3 Users ManualUsers Manual
Adobe Acrobat PDF (2614 kB)		 2016-02-18
2016-02-22
3 Test Setup photosTest Setup Photos
Adobe Acrobat PDF (222 kB)		 2016-02-18
2016-02-22
3 ID Label/Location InfoID Label/Location Info
Adobe Acrobat PDF (142 kB)		 2016-02-18
2016-02-22
2 Family_Declaration_UE910NA_r0sCover Letter(s)
Adobe Acrobat PDF (309 kB)		 2013-04-26
2013-04-26
2 Exhibit 13 - Telit internal authorisation letter_r1sCover Letter(s)
Adobe Acrobat PDF (183 kB)		 2013-04-26
2013-04-26
2 Exhibit 13 - FCC short-term confidentiality request_UE910NA_r0sCover Letter(s)
Adobe Acrobat PDF (1179 kB)		 2013-04-26
2013-04-26
2 Exhibit 13 - FCC permanent confidentiality letter_UE910NA_r0sCover Letter(s)
Adobe Acrobat PDF (1340 kB)		 2013-04-26
2013-04-26
1 Family_Declaration_UE910NA_r0sCover Letter(s)
Adobe Acrobat PDF (309 kB)		 2013-04-26
2013-04-26
1 Exhibit 13 - Telit internal authorisation letter_r1sCover Letter(s)
Adobe Acrobat PDF (183 kB)		 2013-04-26
2013-04-26
1 Exhibit 13 - FCC short-term confidentiality request_UE910NA_r0sCover Letter(s)
Adobe Acrobat PDF (1179 kB)		 2013-04-26
2013-04-26
1 Exhibit 13 - FCC permanent confidentiality letter_UE910NA_r0sCover Letter(s)
Adobe Acrobat PDF (1340 kB)		 2013-04-26
2013-04-26
1 Exhibit 13 - FCC modular approval letter_UE910NA_r1sCover Letter(s)
Adobe Acrobat PDF (442 kB)		 2013-04-26
2013-04-26
1 Internal photographsInternal Photos
Adobe Acrobat PDF (134 kB)		 2013-04-26
2013-10-23
1 Users_guide_V2Users Manual
Adobe Acrobat PDF (2831 kB)		 2013-04-26
2013-10-23
1 Test setup photo for Part15BTest Setup Photos
Adobe Acrobat PDF (494 kB)		 2013-04-26
2013-10-23
1 Test_report_Part15BTest Report
Adobe Acrobat PDF (417 kB)		 2013-04-26
2013-04-26
1 External photographsExternal Photos
Adobe Acrobat PDF (301 kB)		 2013-04-26
2013-10-23
1 Label_locationID Label/Location Info
Adobe Acrobat PDF (384 kB)		 2013-04-26
2013-04-26
2 Exhibit 13 - FCC modular approval letter_UE910NA_r1sCover Letter(s)
Adobe Acrobat PDF (442 kB)		 2013-04-26
2013-04-26
2 RF exposure analysis_UE910NA_r0s1RF Exposure Info
Adobe Acrobat PDF (877 kB)		 2013-04-26
2013-04-26
2 Internal photographsInternal Photos
Adobe Acrobat PDF (134 kB)		 2013-04-26
2013-10-23
2 Users_guide_V2Users Manual
Adobe Acrobat PDF (2831 kB)		 2013-04-26
2013-10-23
2 Test setup photo for Part 22 & 24Test Setup Photos
Adobe Acrobat PDF (124 kB)		 2013-04-26
2013-10-23
2 Test report for Part 22 & 24_V2Test Report
Adobe Acrobat PDF (790 kB)		 2013-04-26
2013-04-26
2 External photographsExternal Photos
Adobe Acrobat PDF (301 kB)		 2013-04-26
2013-10-23
2 Label_locationID Label/Location Info
Adobe Acrobat PDF (384 kB)		 2013-04-26
2013-04-26

APP # 4 (2016-11-03)

App # Document Type Submitted
Available
4 Test Setup Photos Test Setup Photos
Adobe Acrobat PDF (223 kB)		 2016-11-02 00:00:00
2016-11-03 00:00:00
4 ID Label/Location Info ID Label/Location Info
Adobe Acrobat PDF (41 kB)		 2016-11-02 00:00:00
2016-11-03 00:00:00
4 External photo External Photos
Adobe Acrobat PDF (97 kB)		 2016-11-02 00:00:00
2016-11-03 00:00:00
4 Users Manual Users Manual
Adobe Acrobat PDF (2614 kB)		 2016-11-02 00:00:00
2016-11-03 00:00:00
4 Test Report Test Report
Adobe Acrobat PDF (1374 kB)		 2016-11-02 00:00:00
2016-11-03 00:00:00
4 RF Exposure Info RF Exposure Info
Adobe Acrobat PDF (17 kB)		 2016-11-02 00:00:00
2016-11-03 00:00:00
4 Declaration of authorization Cover Letter(s)
Adobe Acrobat PDF (57 kB)		 2016-11-02 00:00:00
2016-11-03 00:00:00
4 Cover letter Cover Letter(s)
Adobe Acrobat PDF (64 kB)		 2016-11-02 00:00:00
2016-11-03 00:00:00
4 Authorization letter permission Cover Letter(s)
Adobe Acrobat PDF (180 kB)		 2016-11-02 00:00:00
2016-11-03 00:00:00

APP # 3 (2016-02-22)

App # Document Type Submitted
Available
3 Test Report Test Report
Adobe Acrobat PDF (1323 kB)		 2016-02-18 00:00:00
2016-02-22 00:00:00
3 RF Exposure Info RF Exposure Info
Adobe Acrobat PDF (18 kB)		 2016-02-18 00:00:00
2016-02-22 00:00:00
3 Declaration of Authorization Cover Letter(s)
Adobe Acrobat PDF (57 kB)		 2016-02-18 00:00:00
2016-02-22 00:00:00
3 Class II permissive change letter for FCC Cover Letter(s)
Adobe Acrobat PDF (64 kB)		 2016-02-18 00:00:00
2016-02-22 00:00:00
3 Authorization Letter Cover Letter(s)
Adobe Acrobat PDF (429 kB)		 2016-02-18 00:00:00
2016-02-22 00:00:00
3 Users Manual Users Manual
Adobe Acrobat PDF (2614 kB)		 2016-02-18 00:00:00
2016-02-22 00:00:00
3 Test Setup photos Test Setup Photos
Adobe Acrobat PDF (222 kB)		 2016-02-18 00:00:00
2016-02-22 00:00:00
3 ID Label/Location Info ID Label/Location Info
Adobe Acrobat PDF (142 kB)		 2016-02-18 00:00:00
2016-02-22 00:00:00

APP # 2 (2013-04-26)

App # Document Type Submitted
Available
2 Family_Declaration_UE910NA_r0s Cover Letter(s)
Adobe Acrobat PDF (309 kB)		 2013-04-26 00:00:00
2013-04-26 00:00:00
2 Exhibit 13 - Telit internal authorisation letter_r1s Cover Letter(s)
Adobe Acrobat PDF (183 kB)		 2013-04-26 00:00:00
2013-04-26 00:00:00
2 Exhibit 13 - FCC short-term confidentiality request_UE910NA_r0s Cover Letter(s)
Adobe Acrobat PDF (1179 kB)		 2013-04-26 00:00:00
2013-04-26 00:00:00
2 Exhibit 13 - FCC permanent confidentiality letter_UE910NA_r0s Cover Letter(s)
Adobe Acrobat PDF (1340 kB)		 2013-04-26 00:00:00
2013-04-26 00:00:00

APP # 1 (2013-04-26)

App # Document Type Submitted
Available
1 Family_Declaration_UE910NA_r0s Cover Letter(s)
Adobe Acrobat PDF (309 kB)		 2013-04-26 00:00:00
2013-04-26 00:00:00
1 Exhibit 13 - Telit internal authorisation letter_r1s Cover Letter(s)
Adobe Acrobat PDF (183 kB)		 2013-04-26 00:00:00
2013-04-26 00:00:00
1 Exhibit 13 - FCC short-term confidentiality request_UE910NA_r0s Cover Letter(s)
Adobe Acrobat PDF (1179 kB)		 2013-04-26 00:00:00
2013-04-26 00:00:00
1 Exhibit 13 - FCC permanent confidentiality letter_UE910NA_r0s Cover Letter(s)
Adobe Acrobat PDF (1340 kB)		 2013-04-26 00:00:00
2013-04-26 00:00:00
1 Exhibit 13 - FCC modular approval letter_UE910NA_r1s Cover Letter(s)
Adobe Acrobat PDF (442 kB)		 2013-04-26 00:00:00
2013-04-26 00:00:00
1 Internal photographs Internal Photos
Adobe Acrobat PDF (134 kB)		 2013-04-26 00:00:00
2013-10-23 00:00:00
1 Users_guide_V2 Users Manual
Adobe Acrobat PDF (2831 kB)		 2013-04-26 00:00:00
2013-10-23 00:00:00
1 Test setup photo for Part15B Test Setup Photos
Adobe Acrobat PDF (494 kB)		 2013-04-26 00:00:00
2013-10-23 00:00:00
1 Test_report_Part15B Test Report
Adobe Acrobat PDF (417 kB)		 2013-04-26 00:00:00
2013-04-26 00:00:00
1 External photographs External Photos
Adobe Acrobat PDF (301 kB)		 2013-04-26 00:00:00
2013-10-23 00:00:00
1 Label_location ID Label/Location Info
Adobe Acrobat PDF (384 kB)		 2013-04-26 00:00:00
2013-04-26 00:00:00

APP # 2 (2013-04-26)

App # Document Type Submitted
Available
2 Exhibit 13 - FCC modular approval letter_UE910NA_r1s Cover Letter(s)
Adobe Acrobat PDF (442 kB)		 2013-04-26 00:00:00
2013-04-26 00:00:00
2 RF exposure analysis_UE910NA_r0s1 RF Exposure Info
Adobe Acrobat PDF (877 kB)		 2013-04-26 00:00:00
2013-04-26 00:00:00
2 Internal photographs Internal Photos
Adobe Acrobat PDF (134 kB)		 2013-04-26 00:00:00
2013-10-23 00:00:00
2 Users_guide_V2 Users Manual
Adobe Acrobat PDF (2831 kB)		 2013-04-26 00:00:00
2013-10-23 00:00:00
2 Test setup photo for Part 22 & 24 Test Setup Photos
Adobe Acrobat PDF (124 kB)		 2013-04-26 00:00:00
2013-10-23 00:00:00
2 Test report for Part 22 & 24_V2 Test Report
Adobe Acrobat PDF (790 kB)		 2013-04-26 00:00:00
2013-04-26 00:00:00
2 External photographs External Photos
Adobe Acrobat PDF (301 kB)		 2013-04-26 00:00:00
2013-10-23 00:00:00
2 Label_location ID Label/Location Info
Adobe Acrobat PDF (384 kB)		 2013-04-26 00:00:00
2013-04-26 00:00:00
2 Tune_up_procedure Parts List/Tune Up Info
Adobe Acrobat PDF (259 kB)		 2013-04-26 00:00:00
N/A
2 Block_diagrams Block Diagram
Adobe Acrobat PDF (1154 kB)		 2013-04-26 00:00:00
N/A

APP # 1 (2013-04-26)

App # Document Type Submitted
Available
1 Block_diagrams Block Diagram
Adobe Acrobat PDF (1154 kB)		 2013-04-26 00:00:00
N/A

APP # 2 (2013-04-26)

App # Document Type Submitted
Available
2 Schematics Schematics
Adobe Acrobat PDF (1929 kB)		 2013-04-26 00:00:00
N/A
2 Label BOM Parts List/Tune Up Info
Adobe Acrobat PDF (66 kB)		 2013-04-26 00:00:00
N/A

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Telit Communications S.p.A.
FCC Registration Number (FRN): 0020384608
Alphanumeric FCC ID: RI7UE910NA
Unique Application Identifier: arDKxpO1TV65yejO0A46xw==
Line one: Viale Stazione di Prosecco 5/b
City: Trieste
State: N/A
Country: Italy
Zip Code: 34010

TCB Information
TCB Application Email Address: nathan.emery@babt.com
TCB Scope: A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices

FCC ID
Grantee Code: RI7
Product Code: UE910NA

Person at the applicant's address to receive grant or for contact
Name: Brian Tucker
Title: Global VP, Quality
Telephone Number: 1-919-439-7977 Extension: 1002
Fax Number: 1-919-840-0337
Email: brian.tucker@telit.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   10/23/2013
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   JBP - Part 15 Class B Computing Device Peripheral
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 2G/3G Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Compliance Certification Services Inc.
First Name:   Kurt
Last Name:   Chen
Telephone Number: 886-3-3240332 Extension: 37
Fax Number:  886-3-3245235
E-mail:  kurt.chen@ccsrf.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular Approval.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Brian Tucker
Title of authorized signature:  Glabal VP, Quality

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Telit Communications S.p.A.
FCC Registration Number (FRN): 0020384608
Alphanumeric FCC ID: RI7UE910NA
Unique Application Identifier: n/QvxyW5hsaCgijpUXVHUg==
Line one: Viale Stazione di Prosecco 5/b
City: Trieste
State: N/A
Country: Italy
Zip Code: 34010

TCB Information
TCB Application Email Address: nathan.emery@babt.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: RI7
Product Code: UE910NA

Person at the applicant's address to receive grant or for contact
Name: Brian Tucker
Title: Global VP, Quality
Telephone Number: 1-919-439-7977 Extension: 1002
Fax Number: 1-919-840-0337
Email: brian.tucker@telit.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   10/23/2013
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 2G/3G Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular Approval. Power is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 10 dBi for 850MHz bands and 9.31 dBi for 1900MHz bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Brian Tucker
Title of authorized signature:  Glabal VP, Quality

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Telit Communications S.p.A.
FCC Registration Number (FRN): 0020384608
Alphanumeric FCC ID: RI7UE910NA
Unique Application Identifier: ZQATsJPCaPTDV/+YzhW5jw==
Line one: Viale Stazione di Prosecco 5/b
City: Trieste
State: N/A
Country: Italy
Zip Code: 34010

TCB Information
TCB Application Email Address: certification@telefication.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: RI7
Product Code: UE910NA

Person at the applicant's address to receive grant or for contact
Name: Brian Tucker
Title: Global VP, Quality
Telephone Number: 1-919-439-7977 Extension: 1002
Fax Number: 1-919-840-0337
Email: brian.tucker@telit.com

Technical Contact
Firm Name:
Hermon Laboratories Ltd.
First Name: Michael
Last Name: Nikishin
Line 1:
Harakevet Industrial zone, P.O.Box 23
Line 2:
Binyamina,
Country:
Israel
Telephone Number:
972 4626 8440
Extension:
Fax Number: 972 4628 8277
E-Mail:

Non Technical Contact
Firm Name: Visonic Ltd.
First Name: Zuri
Last Name: Rubin
Line 1: 24 Habarzel street
Line 2: Tel Aviv,
Country: Israel
Telephone Number: 972 3645 6832 Extension:
Fax Number: 972 3645 6788
E-Mail: zurir@tycoint.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 2G/3G Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Hermon Laboratories Ltd.
First Name:   Alexander
Last Name:   Usoskin
Telephone Number: 972-4628-8001 Extension:
Fax Number:  972-4628-8277
E-mail:  mail@hermonlabs.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
C2PC: The UE910 modem is assembled on separate PCB and connected to the PM-360 PCB. Single Modular Approval. Power is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 10 dBi for 850MHz bands and 9.31 dBi for 1900MHz bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Zuri Rubin
Title of authorized signature:  Certification Manager

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Telit Communications S.p.A.
FCC Registration Number (FRN): 0020384608
Alphanumeric FCC ID: RI7UE910NA
Unique Application Identifier: H1ZM7F0E+A9rZsUtAL2wwg==
Line one: Viale Stazione di Prosecco 5/b
City: Trieste
State: N/A
Country: Italy
Zip Code: 34010

TCB Information
TCB Application Email Address: certification@telefication.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: RI7
Product Code: UE910NA

Person at the applicant's address to receive grant or for contact
Name: Brian Tucker
Title: Global VP, Quality
Telephone Number: 1-919-439-7977 Extension: 1002
Fax Number: 1-919-840-0337
Email: brian.tucker@telit.com

Technical Contact
Firm Name:
Hermon Laboratories Ltd.
First Name: Michael
Last Name: Nikishin
Line 1:
Harakevet Industrial zone, P.O.Box 23
Line 2:
Binyamina
Country:
Israel
Telephone Number:
972 4626 8440
Extension:
Fax Number: 972 4628 8277
E-Mail:

Non Technical Contact
Firm Name: Visonic Ltd.
First Name: Zuri
Last Name: Rubin
Line 1: 24 Habarzel street
Line 2: Tel Aviv
Country: Israel
Telephone Number: 972 3645 6832 Extension:
Fax Number: 972 3645 6788
E-Mail: zurir@tycoint.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 2G/3G Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   Yes


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Hermon Laboratories Ltd.
First Name:   George
Last Name:   Shleimovich
Telephone Number: 97246268468 Extension:
Fax Number:  +972 4 626 8469
E-mail:  George@HERMONLABS.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
C2PC: The UE910 modem is assembled on separate PCB and connected to the PM-360(433) ADT PCB. Limited modular approval. Host: Control panel/Model: UE910-NAR. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 3 dBi for 850MHz bands and 0 dBi for 1900MHz bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Zuri Rubin
Title of authorized signature:  Certification Manager

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom 		Date of Grant: 04/26/2013

Application Dated: 04/26/2013
Telit Communications S.p.A.
Viale Stazione di Prosecco 5/b
Trieste, 34010
Italy
 
Attention: Brian Tucker , Global VP, Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RI7UE910NA
Name of Grantee:  Telit Communications S.p.A.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 2G/3G Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15B  -       

Single Modular Approval.

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Telit Communications S.p.A.
Viale Stazione di Prosecco 5/b
Trieste, 34010
Italy 		  Date of Grant: 04/26/2013

Application Dated: 04/26/2013
 
Attention: Brian Tucker , Global VP, Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RI7UE910NA
Name of Grantee:  Telit Communications S.p.A.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 2G/3G Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15B  -       

Single Modular Approval.



Mail To:


EA515545
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands 		Date of Grant: 11/03/2016

Application Dated: 11/02/2016
Telit Communications S.p.A.
Viale Stazione di Prosecco 5/b
Trieste, 34010
Italy
 
Attention: Brian Tucker , Global VP, Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RI7UE910NA
Name of Grantee:  Telit Communications S.p.A.
Equipment Class: PCS Licensed Transmitter
Notes: 2G/3G Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.27 2.5  PM 248KGXW
22H 826.4  -  846.6 0.25 2.5  PM 4M21F9W
24E 1850.2  -  1909.8 0.6 2.5  PM 246KGXW
24E 1852.4  -  1907.6 0.44 2.5  PM 4M20F9W

C2PC: The UE910 modem is assembled on separate PCB and connected to the PM-360(433) ADT PCB. Limited modular approval. Host: Control panel/Model: UE910-NAR.

The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 3 dBi for 850MHz bands and 0 dBi for 1900MHz bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.


COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Telit Communications S.p.A.
Viale Stazione di Prosecco 5/b
Trieste, 34010
Italy 		  Date of Grant: 11/03/2016

Application Dated: 11/02/2016
 
Attention: Brian Tucker , Global VP, Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RI7UE910NA
Name of Grantee:  Telit Communications S.p.A.
Equipment Class: PCS Licensed Transmitter
Notes: 2G/3G Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.27 2.5  PM 248KGXW
22H 826.4  -  846.6 0.25 2.5  PM 4M21F9W
24E 1850.2  -  1909.8 0.6 2.5  PM 246KGXW
24E 1852.4  -  1907.6 0.44 2.5  PM 4M20F9W

C2PC: The UE910 modem is assembled on separate PCB and connected to the PM-360(433) ADT PCB. Limited modular approval. Host: Control panel/Model: UE910-NAR.

The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 3 dBi for 850MHz bands and 0 dBi for 1900MHz bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.



Mail To:


EA970760
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom 		Date of Grant: 04/26/2013

Application Dated: 04/26/2013
Telit Communications S.p.A.
Viale Stazione di Prosecco 5/b
Trieste, 34010
Italy
 
Attention: Brian Tucker , Global VP, Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RI7UE910NA
Name of Grantee:  Telit Communications S.p.A.
Equipment Class: PCS Licensed Transmitter
Notes: 2G/3G Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.91 2.5  PM 248KGXW
22H 824.2  -  848.8 0.85 2.5  PM 248KG7W
22H 826.4  -  846.6 0.66 2.5  PM 4M21F9W
24E 1850.2  -  1909.8 0.85 2.5  PM 246KGXW
24E 1850.2  -  1909.8 0.62 2.5  PM 247KG7W
24E 1852.4  -  1907.6 0.47 2.5  PM 4M20F9W

Single Modular Approval. Power is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 10 dBi for 850MHz bands and 9.31 dBi for 1900MHz bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures.

The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.


COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Telit Communications S.p.A.
Viale Stazione di Prosecco 5/b
Trieste, 34010
Italy 		  Date of Grant: 04/26/2013

Application Dated: 04/26/2013
 
Attention: Brian Tucker , Global VP, Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RI7UE910NA
Name of Grantee:  Telit Communications S.p.A.
Equipment Class: PCS Licensed Transmitter
Notes: 2G/3G Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.91 2.5  PM 248KGXW
22H 824.2  -  848.8 0.85 2.5  PM 248KG7W
22H 826.4  -  846.6 0.66 2.5  PM 4M21F9W
24E 1850.2  -  1909.8 0.85 2.5  PM 246KGXW
24E 1850.2  -  1909.8 0.62 2.5  PM 247KG7W
24E 1852.4  -  1907.6 0.47 2.5  PM 4M20F9W

Single Modular Approval. Power is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 10 dBi for 850MHz bands and 9.31 dBi for 1900MHz bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures.

The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.



Mail To:


EA393599
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands 		Date of Grant: 02/22/2016

Application Dated: 02/18/2016
Telit Communications S.p.A.
Viale Stazione di Prosecco 5/b
Trieste, 34010
Italy
 
Attention: Brian Tucker , Global VP, Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RI7UE910NA
Name of Grantee:  Telit Communications S.p.A.
Equipment Class: PCS Licensed Transmitter
Notes: 2G/3G Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.27 2.5  PM 248KGXW
22H 826.4  -  846.6 0.25 2.5  PM 4M21F9W
24E 1850.2  -  1909.8 0.6 2.5  PM 246KGXW
24E 1852.4  -  1907.6 0.44 2.5  PM 4M20F9W

C2PC: The UE910 modem is assembled on separate PCB and connected to the PM-360 PCB.

Single Modular Approval. Power is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 10 dBi for 850MHz bands and 9.31 dBi for 1900MHz bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.


COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Telit Communications S.p.A.
Viale Stazione di Prosecco 5/b
Trieste, 34010
Italy 		  Date of Grant: 02/22/2016

Application Dated: 02/18/2016
 
Attention: Brian Tucker , Global VP, Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RI7UE910NA
Name of Grantee:  Telit Communications S.p.A.
Equipment Class: PCS Licensed Transmitter
Notes: 2G/3G Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.27 2.5  PM 248KGXW
22H 826.4  -  846.6 0.25 2.5  PM 4M21F9W
24E 1850.2  -  1909.8 0.6 2.5  PM 246KGXW
24E 1852.4  -  1907.6 0.44 2.5  PM 4M20F9W

C2PC: The UE910 modem is assembled on separate PCB and connected to the PM-360 PCB.

Single Modular Approval. Power is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 10 dBi for 850MHz bands and 9.31 dBi for 1900MHz bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.



Mail To:


EA254172

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details