FCC ID RI7UL865NA
UL865-N3G 3G wireless module
by Telit Communications S.p.A.
Grantee Code: RI7 Product Code: UL865NA
Latest application date: 2013-12-18
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 826.4-846.6 MHz | Class II permissive change or modification of presently authorized equipment | 2013-12-18 |
| 824.2-848.8 MHz | Original Equipment | 2013-11-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User guide | Users Manual | 2014-05-04 | PDF 1.8 MB |
| Internal_photographs | Internal Photos | 2014-06-12 | PDF 192.1 KB |
| Internal photos | Internal Photos | 2014-05-04 | PDF 165.8 KB |
| External_photographs | External Photos | 2014-06-12 | PDF 93.8 KB |
| External photos | External Photos | 2014-05-04 | PDF 88.9 KB |
| Label_location | ID Label/Location Info | 2013-12-18 | PDF 155.3 KB |
| Label and location | ID Label/Location Info | 2013-11-06 | PDF 178.1 KB |
| Test setup photos | Test Setup Photos | 2014-05-04 | PDF 382.3 KB |
| Test setup photos | Test Setup Photos | 2014-05-04 | PDF 143.7 KB |
| Test report | Test Report | 2013-11-06 | PDF 819.8 KB |
| Test report | Test Report | 2013-11-06 | PDF 1.2 MB |
| Exhibit 13 - FCC modular approval letter_UL865N3G_r1s | Cover Letter(s) | 2013-12-18 | PDF 126.9 KB |
| Exhibit 13 - FCC permanent confidentiality letter_UL865N3G_r0s | Cover Letter(s) | 2013-12-18 | PDF 121.1 KB |
| Exhibit 13 - FCC short-term confidentiality request_UL865N3G_r0s | Cover Letter(s) | 2013-12-18 | PDF 111.8 KB |
| Exhibit 13 - FCC_IC agent letter_UL865N3G_r0s | Cover Letter(s) | 2013-12-18 | PDF 112.7 KB |
| Exhibit 13 - Telit internal authorisation letter_r1s | Cover Letter(s) | 2013-12-18 | PDF 183.3 KB |
| FCC_IC_changes_declaration | Cover Letter(s) | 2013-12-18 | PDF 205.1 KB |
| Agent letter | Cover Letter(s) | 2013-11-06 | PDF 116.8 KB |
| Agents letter | Cover Letter(s) | 2013-11-06 | PDF 116.8 KB |
| Family declaration | Cover Letter(s) | 2013-11-06 | PDF 98.2 KB |
| Internal authorisation | Cover Letter(s) | 2013-11-06 | PDF 183.3 KB |
| Internal authorisation letter | Cover Letter(s) | 2013-11-06 | PDF 183.3 KB |
| Modular approval letter | Cover Letter(s) | 2013-11-06 | PDF 135.4 KB |
| Permanent confidentiality letter | Cover Letter(s) | 2013-11-06 | PDF 122.2 KB |
| Short term confidentiality letter | Cover Letter(s) | 2013-11-06 | PDF 111.4 KB |
| RF exposure analysis_UL865N3G_r0s_1 | RF Exposure Info | 2013-12-18 | PDF 484 KB |
| RF exposure analysis | RF Exposure Info | 2013-11-06 | PDF 299.3 KB |
Application Information
| Application ID | aF2Qlg0haJjHCh+0XIwDKQ== |
|---|---|
| Final Action Date | 2013-12-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0020384608 |
| Model | UL865NA |
| Frequency Range | 826.4-846.6 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | UL865-N3G 3G wireless module |
| Responsible Party | Brian Tucker, Global VP, Quality, brian.tucker@telit.com  , 1-919-439-7977 |
| Agent | AT4 Wireless, rorejas@at4wireless.com  |
| Test Firm | Juan Carlos Soler Claros, AT4 wireless S.A., jsoler@at4wireless.com , 34-9562-619100 |
| TCB Email | allen.ferry@babt.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 06/12/2014 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change as described in this filing. Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 10.42 dBi for part 22H and 9.01 dBi for part 24E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| aF2Qlg0haJjHCh+0XIwDKQ== | 2013-12-18 | Class II permissive change or modification of presently authorized equipment |
| zlQgGX1R/6+ctfGRLeX2RA== | 2013-11-06 | Original Equipment |
| azSy00M9sK27BzoCWjQQzw== | 2013-11-06 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application zlQgGX1R/6+ctfGRLeX2RA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 11/06/2013 Application Dated: 11/06/2013 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Trieste, 34010 Italy |
| Attention: Brian Tucker , Global VP, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7UL865NA |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | 2G/3G module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.7378 | 1.0 PM | 319KGXW | |
| 22H | 824.2 - 848.8 | 0.309 | 1.0 PM | 319KG7W | |
| 24E | 1850.2 - 1909.8 | 1.0715 | 1.0 PM | 320KGXW | |
| 24E | 1850.2 - 1909.8 | 0.4571 | 1.0 PM | 320KG7W | |
| 22H | 826.4 - 846.6 | 0.1914 | 1.0 PM | 4M59F9W | |
| 24E | 1852.4 - 1907.6 | 0.2018 | 1.0 PM | 4M63F9W |
| Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 6.93 dBi for part 22H and 2.51 dBi for part 24E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. |
EAS Grant - Application zlQgGX1R/6+ctfGRLeX2RA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Trieste, 34010 Italy |
Date of Grant: 11/06/2013 Application Dated: 11/06/2013 |
| Attention: Brian Tucker , Global VP, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7UL865NA |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | 2G/3G module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.7378 | 1.0 PM | 319KGXW | |
| 22H | 824.2 - 848.8 | 0.309 | 1.0 PM | 319KG7W | |
| 24E | 1850.2 - 1909.8 | 1.0715 | 1.0 PM | 320KGXW | |
| 24E | 1850.2 - 1909.8 | 0.4571 | 1.0 PM | 320KG7W | |
| 22H | 826.4 - 846.6 | 0.1914 | 1.0 PM | 4M59F9W | |
| 24E | 1852.4 - 1907.6 | 0.2018 | 1.0 PM | 4M63F9W |
| Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 6.93 dBi for part 22H and 2.51 dBi for part 24E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 11/06/2013 Application Dated: 11/06/2013 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Trieste, 34010 Italy |
| Attention: Brian Tucker , Global VP, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7UL865NA |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | 2G/3G module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application azSy00M9sK27BzoCWjQQzw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Trieste, 34010 Italy |
Date of Grant: 11/06/2013 Application Dated: 11/06/2013 |
| Attention: Brian Tucker , Global VP, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7UL865NA |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | 2G/3G module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 12/18/2013 Application Dated: 12/18/2013 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Trieste, 34010 Italy |
| Attention: Brian Tucker , Global VP, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7UL865NA |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UL865-N3G 3G wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 826.4 - 846.6 | 0.1914 | 1.0 PM | 4M59F9W | |
| 24E | 1852.4 - 1907.6 | 0.2018 | 1.0 PM | 4M63F9W |
| Class II permissive change as described in this filing. Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 10.42 dBi for part 22H and 9.01 dBi for part 24E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. |
EAS Grant - Application aF2Qlg0haJjHCh+0XIwDKQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Trieste, 34010 Italy |
Date of Grant: 12/18/2013 Application Dated: 12/18/2013 |
| Attention: Brian Tucker , Global VP, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7UL865NA |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UL865-N3G 3G wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 826.4 - 846.6 | 0.1914 | 1.0 PM | 4M59F9W | |
| 24E | 1852.4 - 1907.6 | 0.2018 | 1.0 PM | 4M63F9W |
| Class II permissive change as described in this filing. Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 10.42 dBi for part 22H and 9.01 dBi for part 24E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. |
| Mail To: |