FCC ID RID-LM513

LoRa Module

by GlobalSat WorldCom Corporation

Grantee Code: RID   Product Code: LM513
Latest application date: 2018-07-05

FCC ID Device Details

FCC IDRID-LM513
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRID
Product CodeLM513
Applicant BusinessGlobalSat WorldCom Corporation 🇹🇼
Related Domains globalsat.com.tw
Equipment ClassLoRa Module
Test FirmBureau Veritas CPS (H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.3-914.9 MHzClass II permissive change or modification of presently authorized equipment2018-07-05
902.3-914.9 MHzOriginal Equipment2018-03-12

Exhibits

DocumentTypeAvailableFile
Users Manual.pdfUsers Manual2018-09-08PDF 340.5 KB
Internal Photos_rev.pdfInternal Photos2018-09-08PDF 73.3 KB
External Photos.pdfExternal Photos2018-09-08PDF 147 KB
Label Location.pdfID Label/Location Info2018-03-12PDF 166.9 KB
Label Sample.pdfID Label/Location Info2018-03-12PDF 287.6 KB
Test Set Up Photos.pdfTest Setup Photos2019-01-01PDF 4.9 MB
Test Setup Photos.pdfTest Setup Photos2018-09-08PDF 555.7 KB
Test Report (DTS-WLAN) rev.pdfTest Report2018-07-05PDF 979 KB
Test Report_rev 2.pdfTest Report2018-03-12PDF 945.4 KB
Confidentiality Request (Long term).pdfCover Letter(s)2018-07-05PDF 454.7 KB
Confidentiality Request (Short term).pdfCover Letter(s)2018-07-05PDF 108 KB
Cover Letter (Agent Authorization).pdfCover Letter(s)2018-07-05PDF 464.8 KB
Description of Change rev.pdfCover Letter(s)2018-07-05PDF 21.2 KB
Confidentiality Request (long term).pdfCover Letter(s)2018-03-12PDF 449 KB
Confidentiality Request (short term).pdfCover Letter(s)2018-03-12PDF 371.8 KB
Cover Letter (Agent Authorization)_rev.pdfCover Letter(s)2018-03-12PDF 488.1 KB
Cover Letter (Modular Approval Request)_rev.pdfCover Letter(s)2018-03-12PDF 49.2 KB
RF Exposure Info (MPE).pdfRF Exposure Info2018-07-05PDF 55.1 KB
RF Exposure Info (MPE)_rev.pdfRF Exposure Info2018-03-12PDF 175.5 KB
Block Diagram.pdf Metadata onlyBlock DiagramPDF 96.5 KB
Schematics.pdf Metadata onlySchematicsPDF 82 KB
Operational Description rev 2.pdf Metadata onlyOperational DescriptionPDF 49.9 KB
Operational Description.pdf Metadata onlyOperational DescriptionPDF 20.8 KB

Application Information

Application IDsBkHPzA5jnqCiBY+W0n4xQ==
Final Action Date2018-07-05
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017928177
ModelLM513
Frequency Range902.3-914.9 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionLoRa Module
Responsible PartyRay Tsai, Director, ray.tsai@globalsat.com.tw , 886-2-82263799
AgentAndrea Andrea Andrea, Bureau Veritas Consumer Products Services (H.K.) L, andrea.hsia@tw.bureauveritas.com , 88633183232
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com , +886-(0)3-260-0884
TCB Emailtcb@us.bureauveritas.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date01/01/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC to add new frequency range be software enable. Power listed is conducted. Device support Hybrid mode. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

Applications

Application IDDatePurpose
sBkHPzA5jnqCiBY+W0n4xQ==2018-07-05Class II permissive change or modification of presently authorized equipment
QgTt4r4se7JVBO8hi1xLgQ==2018-03-12Original Equipment

Equipment Authorization

FrequencyOutputRules
902.3-914.9 MHz0.08415C
902.9-927.5 MHz0.05915C
903-914.2 MHz0.08615C

Grants

TCB Grant - Application sBkHPzA5jnqCiBY+W0n4xQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 07/05/2018

Application Dated: 07/05/2018
GlobalSat WorldCom Corporation
16F., No.186, Jian 1st Rd. Zhonghe Dist.,
New Taipei City, 23553
Taiwan
 
Attention: Ray Tsai , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RID-LM513
Name of Grantee:  GlobalSat WorldCom Corporation
Equipment Class: Digital Transmission System
Notes: LoRa Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.3  -  914.9 0.084  
15C 903.0  -  914.2 0.086  
15C 902.9  -  927.5 0.059  

C2PC to add new frequency range be software enable. Power listed is conducted. Device support Hybrid mode. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

EAS Grant - Application sBkHPzA5jnqCiBY+W0n4xQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

GlobalSat WorldCom Corporation
16F., No.186, Jian 1st Rd. Zhonghe Dist.,
New Taipei City, 23553
Taiwan
  Date of Grant: 07/05/2018

Application Dated: 07/05/2018
 
Attention: Ray Tsai , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RID-LM513
Name of Grantee:  GlobalSat WorldCom Corporation
Equipment Class: Digital Transmission System
Notes: LoRa Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.3  -  914.9 0.084  
15C 903.0  -  914.2 0.086  
15C 902.9  -  927.5 0.059  

C2PC to add new frequency range be software enable. Power listed is conducted. Device support Hybrid mode. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.



TCB Grant - Application QgTt4r4se7JVBO8hi1xLgQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 03/12/2018

Application Dated: 03/12/2018
GlobalSat WorldCom Corporation
16F., No.186, Jian 1st Rd. Zhonghe Dist.,
New Taipei City, 23553
Taiwan
 
Attention: Ray Tsai , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RID-LM513
Name of Grantee:  GlobalSat WorldCom Corporation
Equipment Class: Digital Transmission System
Notes: LoRa Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.3  -  914.9 0.084  
15C 903.0  -  914.2 0.086  

Power listed is conducted. Device support Hybrid mode. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

EAS Grant - Application QgTt4r4se7JVBO8hi1xLgQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

GlobalSat WorldCom Corporation
16F., No.186, Jian 1st Rd. Zhonghe Dist.,
New Taipei City, 23553
Taiwan
  Date of Grant: 03/12/2018

Application Dated: 03/12/2018
 
Attention: Ray Tsai , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RID-LM513
Name of Grantee:  GlobalSat WorldCom Corporation
Equipment Class: Digital Transmission System
Notes: LoRa Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.3  -  914.9 0.084  
15C 903.0  -  914.2 0.086  

Power listed is conducted. Device support Hybrid mode. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.



Mail To: