FCC ID RJF-A3502
ALTITUDE 350-2 ACCESS POINT
by Extreme Networks
Grantee Code: RJF Product Code: A3502
Latest application date: 2006-08-09
FCC ID Device Details
| FCC ID | RJF-A3502 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RJF |
| Product Code | A3502 |
| Applicant Business | Extreme Networks 🇺🇸 |
| Related Domains |  extremenetworks.com |
| Equipment Class | ALTITUDE 350-2 ACCESS POINT |
| Test Firm | UltraTech Engineering Labs Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2006-08-09 |
| 5150-5250 MHz | Class II permissive change or modification of presently authorized equipment | 2006-08-09 |
| 2412-2462 MHz | Original Equipment | 2005-07-22 |
| 5150-5250 MHz | Original Equipment | 2005-07-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| QUICK START GUIDE | Users Manual | 2005-07-22 | PDF 602 KB |
| USERS MANUAL | Users Manual | 2005-07-22 | PDF 3.7 MB |
| INTERNAL PHOTOS | Internal Photos | 2006-08-09 | PDF 3.3 MB |
| INTERNAL PHOTOS | Internal Photos | 2005-07-22 | PDF 474.7 KB |
| EXTERNAL PHOTOS | External Photos | 2006-08-09 | PDF 1.5 MB |
| EXTERNAL PHOTOS | External Photos | 2005-07-22 | PDF 196.4 KB |
| ID LABEL AND LOCATION | ID Label/Location Info | 2005-07-22 | PDF 197.8 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2006-08-09 | PDF 2.5 MB |
| TEST SETUP PHOTOS | Test Setup Photos | 2005-07-22 | PDF 441.7 KB |
| TEST REPORT | Test Report | 2006-08-09 | PDF 662.6 KB |
| TEST REPORT 2 | Test Report | 2005-07-22 | PDF 703.6 KB |
| TEST REPORT 1 | Test Report | 2005-07-22 | PDF 2.2 MB |
| ATTESTATION STATEMENT | Attestation Statements | 2005-07-22 | PDF 41.1 KB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2006-08-09 | PDF 55 KB |
| COVER LETTER | Cover Letter(s) | 2006-08-09 | PDF 105.5 KB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2005-07-22 | PDF 74.7 KB |
| RF EXPOSURE Metadata only | RF Exposure Info | 2005-07-22 | PDF 170.7 KB |
| RF EXPOSURE INFO | RF Exposure Info | 2005-07-22 | PDF 2.2 MB |
| BLOCK DIAGRAM Metadata only | Block Diagram | PDF 179.2 KB | |
| SCHEMATICS Metadata only | Schematics | PDF 371.7 KB | |
| ANTENNAS INFO Metadata only | Operational Description | PDF 299.8 KB | |
| OPERATIONAL DESCRIPTION Metadata only | Operational Description | PDF 53.7 KB | |
| PARTS LIST Metadata only | Parts List/Tune Up Info | PDF 19.8 KB | |
| PARTS LIST Metadata only | Parts List/Tune Up Info | PDF 24.8 KB |
Application Information
| Application ID | qQM0OHTr/8J1pp/VFey0QQ== |
|---|---|
| Final Action Date | 2006-08-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0009661638 |
| Model | A3502 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | ALTITUDE 350-2 ACCESS POINT |
| Responsible Party | Mark E Darula, Compliance Manager, mdarula@extremenetworks.com , 408 579-2800 |
| Test Firm | Tri Luu, UltraTech Engineering Labs Inc., tri@ultratech-labs.com  , 877-747-6381 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. Maximum conducted output power for the unit with integral antenna is 63mW controlled by protocol firmware. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: Components changed to comply with European RoHS. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| qQM0OHTr/8J1pp/VFey0QQ== | 2006-08-09 | Class II permissive change or modification of presently authorized equipment |
| HN4TsB53nVfQpFYgbkgyNw== | 2006-08-09 | Class II permissive change or modification of presently authorized equipment |
| VbM6ye6iACMWUomOjIP0IQ== | 2005-07-22 | Original Equipment |
| L6FjbRPfaR54l5VOQ1gGJw== | 2005-07-22 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application VbM6ye6iACMWUomOjIP0IQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/22/2005 Application Dated: 07/22/2005 |
| Extreme Networks |
| 3585 Monroe Street |
| Santa Clara, CA 95051 |
| Attention: Mark Darula , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RJF-A3502 |
| Name of Grantee: | Extreme Networks |
| Equipment Class: | Digital Transmission System |
| Notes: | ALTITUDE 350-2 ACCESS POINT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.117 |
| Power listed is conducted. Maximum conducted output power for the unit with integral antenna is 63mW controlled by protocol firmware. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application VbM6ye6iACMWUomOjIP0IQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Extreme Networks 3585 Monroe Street Santa Clara, CA 95051 United States |
Date of Grant: 07/22/2005 Application Dated: 07/22/2005 |
| Attention: Mark Darula , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RJF-A3502 |
| Name of Grantee: | Extreme Networks |
| Equipment Class: | Digital Transmission System |
| Notes: | ALTITUDE 350-2 ACCESS POINT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.117 |
| Power listed is conducted. Maximum conducted output power for the unit with integral antenna is 63mW controlled by protocol firmware. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/09/2006 Application Dated: 08/09/2006 |
| Extreme Networks |
| 3585 Monroe Street |
| Santa Clara, CA 95051 |
| Attention: Mark Darula , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RJF-A3502 |
| Name of Grantee: | Extreme Networks |
| Equipment Class: | Digital Transmission System |
| Notes: | ALTITUDE 350-2 ACCESS POINT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.117 |
| Power listed is conducted. Maximum conducted output power for the unit with integral antenna is 63mW controlled by protocol firmware. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: Components changed to comply with European RoHS. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application qQM0OHTr/8J1pp/VFey0QQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Extreme Networks 3585 Monroe Street Santa Clara, CA 95051 United States |
Date of Grant: 08/09/2006 Application Dated: 08/09/2006 |
| Attention: Mark Darula , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RJF-A3502 |
| Name of Grantee: | Extreme Networks |
| Equipment Class: | Digital Transmission System |
| Notes: | ALTITUDE 350-2 ACCESS POINT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.117 |
| Power listed is conducted. Maximum conducted output power for the unit with integral antenna is 63mW controlled by protocol firmware. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: Components changed to comply with European RoHS. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/22/2005 Application Dated: 07/22/2005 |
| Extreme Networks |
| 3585 Monroe Street |
| Santa Clara, CA 95051 |
| Attention: Mark Darula , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RJF-A3502 |
| Name of Grantee: | Extreme Networks |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ALTITUDE 350-2 ACCESS POINT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5150.0 - 5250.0 | 0.04 | ||
| 15E | 5250.0 - 5350.0 | 0.049 | |||
| 15E | 5725.0 - 5825.0 | 0.02 |
| Power listed is conducted. Operations in the band 5.15-5.25GHz are restricted to indoor usage only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application L6FjbRPfaR54l5VOQ1gGJw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Extreme Networks 3585 Monroe Street Santa Clara, CA 95051 United States |
Date of Grant: 07/22/2005 Application Dated: 07/22/2005 |
| Attention: Mark Darula , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RJF-A3502 |
| Name of Grantee: | Extreme Networks |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ALTITUDE 350-2 ACCESS POINT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5150.0 - 5250.0 | 0.04 | ||
| 15E | 5250.0 - 5350.0 | 0.049 | |||
| 15E | 5725.0 - 5825.0 | 0.02 |
| Power listed is conducted. Operations in the band 5.15-5.25GHz are restricted to indoor usage only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/09/2006 Application Dated: 08/09/2006 |
| Extreme Networks |
| 3585 Monroe Street |
| Santa Clara, CA 95051 |
| Attention: Mark Darula , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RJF-A3502 |
| Name of Grantee: | Extreme Networks |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ALTITUDE 350-2 ACCESS POINT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5150.0 - 5250.0 | 0.04 | ||
| CC | 15E | 5250.0 - 5350.0 | 0.049 | ||
| CC | 15E | 5725.0 - 5825.0 | 0.02 |
| Power listed is conducted. Operations in the band 5.15-5.25GHz are restricted to indoor usage only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: Components changed to comply with European RoHS. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application HN4TsB53nVfQpFYgbkgyNw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Extreme Networks 3585 Monroe Street Santa Clara, CA 95051 United States |
Date of Grant: 08/09/2006 Application Dated: 08/09/2006 |
| Attention: Mark Darula , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RJF-A3502 |
| Name of Grantee: | Extreme Networks |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ALTITUDE 350-2 ACCESS POINT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5150.0 - 5250.0 | 0.04 | ||
| CC | 15E | 5250.0 - 5350.0 | 0.049 | ||
| CC | 15E | 5725.0 - 5825.0 | 0.02 |
| Power listed is conducted. Operations in the band 5.15-5.25GHz are restricted to indoor usage only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: Components changed to comply with European RoHS. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |