FCC ID RM9-ABNX03
TRANSCEIVER MODULE
by Actall Corporation
Grantee Code: RM9 Product Code: ABNX03
Latest application date: 2006-01-04
FCC ID Device Details
| FCC ID | RM9-ABNX03 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RM9 |
| Product Code | ABNX03 |
| Applicant Business | Actall Corporation 🇺🇸 |
| Related Domains |  actall.com |
| Equipment Class | TRANSCEIVER MODULE |
| Test Firm | Timco Engineering, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902-928 MHz | Class II permissive change or modification of presently authorized equipment | 2006-01-04 |
| 902-928 MHz | Original Equipment | 2004-01-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2004-01-20 | PDF 166.7 KB |
| Internal Photos | Internal Photos | 2004-01-20 | PDF 135.4 KB |
| External Photo 2 | External Photos | 2004-01-20 | PDF 24.2 KB |
| External Photos | External Photos | 2004-01-20 | PDF 234 KB |
| Label | ID Label/Location Info | 2004-01-20 | PDF 14.3 KB |
| Label Material | ID Label/Location Info | 2004-01-20 | PDF 167.4 KB |
| antenna specs | Operational Description | 2006-01-04 | PDF 62.4 KB |
| test setup photos | Test Setup Photos | 2006-01-04 | PDF 322.5 KB |
| Test Setup Photos | Test Setup Photos | 2004-01-20 | PDF 111.4 KB |
| test report | Test Report | 2006-01-04 | PDF 158.3 KB |
| Conducted Emissions Test Data | Test Report | 2004-01-20 | PDF 381.5 KB |
| Line Conducted Emissions Test Data | Test Report | 2004-01-20 | PDF 160.6 KB |
| Radiated Emissions Test Data | Test Report | 2004-01-20 | PDF 622.1 KB |
| class II change letter | Cover Letter(s) | 2006-01-04 | PDF 417.8 KB |
| Confidentiality Req | Cover Letter(s) | 2004-01-20 | PDF 62.1 KB |
| Modular Transmitter Letter | Cover Letter(s) | 2004-01-20 | PDF 74.3 KB |
| Response to TCB Findings | Cover Letter(s) | 2004-01-20 | PDF 81 KB |
| MPE Calculation | RF Exposure Info | 2004-01-20 | PDF 145 KB |
| Block Diagram Metadata only | Block Diagram | PDF 60.7 KB | |
| Schematics Metadata only | Schematics | PDF 234.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 60.7 KB |
Application Information
| Application ID | sBrepofSiN2jbDHSFSp3zQ== |
|---|---|
| Final Action Date | 2006-01-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0009838376 |
| Model | ABNX03 |
| Frequency Range | 902-928 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | TRANSCEIVER MODULE |
| Responsible Party | Ari Shore, President, ari@actall.com , 303-487-4222 |
| Test Firm | S Sanders, Timco Engineering, Inc., info@timcoengr.com  , 888-472-2424 |
| TCB Email | TEI@TIMCOENGR.COM |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. Modular approval. Only the antennas listed in this filing can be used with the module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This Class II Change adds the Nearson S467AH-915S antenna and 2 meter antenna extension cable. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| sBrepofSiN2jbDHSFSp3zQ== | 2006-01-04 | Class II permissive change or modification of presently authorized equipment |
| XJ8bM9AplH21d0Jw0cyqjg== | 2004-01-20 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application XJ8bM9AplH21d0Jw0cyqjg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 01/20/2004 Application Dated: 01/20/2004 |
| Actall Corporation |
| 3925 Monaco Parkway |
| Unit D |
| Denver, CO 80207 |
| Attention: Ari Shore , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RM9-ABNX03 |
| Name of Grantee: | Actall Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 902.0 - 928.0 | 0.5 |
| Power listed is conducted. Modular approval. Only the antennas listed in this filing can be used with the module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application XJ8bM9AplH21d0Jw0cyqjg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Actall Corporation 3925 Monaco Parkway Unit D Denver, CO 80207 United States |
Date of Grant: 01/20/2004 Application Dated: 01/20/2004 |
| Attention: Ari Shore , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RM9-ABNX03 |
| Name of Grantee: | Actall Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 902.0 - 928.0 | 0.5 |
| Power listed is conducted. Modular approval. Only the antennas listed in this filing can be used with the module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 01/04/2006 Application Dated: 01/04/2006 |
| Actall Corporation |
| 3925 Monaco Parkway |
| Unit D |
| Denver, CO 80207 |
| Attention: Ari Shore , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RM9-ABNX03 |
| Name of Grantee: | Actall Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | TRANSCEIVER MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.0 - 928.0 | 0.5 |
| Power listed is conducted. Modular approval. Only the antennas listed in this filing can be used with the module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This Class II Change adds the Nearson S467AH-915S antenna and 2 meter antenna extension cable. |
EAS Grant - Application sBrepofSiN2jbDHSFSp3zQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Actall Corporation 3925 Monaco Parkway Unit D Denver, CO 80207 United States |
Date of Grant: 01/04/2006 Application Dated: 01/04/2006 |
| Attention: Ari Shore , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RM9-ABNX03 |
| Name of Grantee: | Actall Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | TRANSCEIVER MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.0 - 928.0 | 0.5 |
| Power listed is conducted. Modular approval. Only the antennas listed in this filing can be used with the module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This Class II Change adds the Nearson S467AH-915S antenna and 2 meter antenna extension cable. |
| Mail To: |