FCC ID ROR00000003
HUB and RBM MODULE
by Blinq Networks Inc.
Grantee Code: ROR Product Code: 00000003
Latest application date: 2015-10-21
FCC ID Device Details
| FCC ID | ROR00000003 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | ROR |
| Product Code | 00000003 |
| Applicant Business | Blinq Networks Inc. 🇨🇦 |
| Related Domains |  blinqnetworks.com |
| Equipment Class | HUB and RBM MODULE |
| Test Firm | Nemko Canada Inc. (Ottawa) |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2015-10-21 |
| 5740-5810 MHz | Original Equipment | 2014-05-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2014-05-01 | PDF 3 MB |
| Internal Photos Metadata only | ID Label/Location Info | 2014-05-01 | PDF 742.1 KB |
| Internal Photos | Internal Photos | 2014-05-01 | PDF 742.1 KB |
| External Photos | External Photos | 2014-05-01 | PDF 742.1 KB |
| Label and Label Location | ID Label/Location Info | 2014-05-01 | PDF 415.6 KB |
| Test Setup Photos | Test Setup Photos | 2014-05-01 | PDF 1.3 MB |
| test report 5.2 GHz | Test Report | 2015-10-21 | PDF 1.4 MB |
| test report 5.8 GHz | Test Report | 2015-10-21 | PDF 2 MB |
| Test Report | Test Report | 2014-05-01 | PDF 2.8 MB |
| C2PC letter | Cover Letter(s) | 2015-10-21 | PDF 43.5 KB |
| NDA | Cover Letter(s) | 2015-10-21 | PDF 162.5 KB |
| agent letter | Cover Letter(s) | 2015-10-21 | PDF 49.3 KB |
| confidential letter | Cover Letter(s) | 2015-10-21 | PDF 59.3 KB |
| Cover letters | Cover Letter(s) | 2014-05-01 | PDF 275.3 KB |
| MPE | RF Exposure Info | 2015-10-21 | PDF 24.8 KB |
| RF exposure info | RF Exposure Info | 2014-05-01 | PDF 21.8 KB |
| installation guide Metadata only | Users Manual | PDF 3.5 MB | |
| user manual Metadata only | Users Manual | PDF 3.4 MB | |
| internal photos Metadata only | Internal Photos | PDF 1.2 MB | |
| Block Diagram Metadata only | Block Diagram | PDF 170.7 KB | |
| Schematics Metadata only | Schematics | PDF 3.3 MB | |
| schematics Metadata only | Schematics | PDF 816.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 40.4 KB | |
| antenna specification sheets Metadata only | Operational Description | PDF 686.4 KB | |
| operational description Metadata only | Operational Description | PDF 868.4 KB | |
| software description Metadata only | Operational Description | PDF 178.7 KB | |
| parts list Metadata only | Parts List/Tune Up Info | PDF 227.7 KB |
Application Information
| Application ID | pQUDxrFAX1jxCi9eP2vE6g== |
|---|---|
| Final Action Date | 2015-10-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022440390 |
| Model | 00000003 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | HUB and RBM MODULE |
| Responsible Party | Jim Dickerman, Vice President Engineering, jim.dickerman@blinqnetworks.com , 416-214-4204 |
| Agent | Jenny Jenny Jenny, Nemko USA, Jenny.gibbs@nemko.com  , 940-455-2365 |
| Technical Contact | Nick Petrescu, BLiNQ Wireless Inc., Nick.petrescu@blinqnetworks.com , 613-599-3388 |
| Test Firm | Charles Neal, Nemko Canada Inc. (Ottawa), charles.neal@nemko.com , 613-737-9680 |
| TCB Email | stuart.beck@nemko.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power Output listed is aggregated conducted. Professional installation is required. The antennas used for this transmitter must be installed to provide a separation distance of at least 60 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| pQUDxrFAX1jxCi9eP2vE6g== | 2015-10-21 | Class II permissive change or modification of presently authorized equipment |
| PEnt0LKVfn3EBoW7Ipq0NQ== | 2014-05-01 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application pQUDxrFAX1jxCi9eP2vE6g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 10/21/2015 Application Dated: 10/06/2015 |
| Blinq Networks Inc. |
| 140 Renfrew Drive |
| Suite 200 |
| Markham, L3R 6B3 Canada |
| Attention: Jim Dickerman , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ROR00000003 |
| Name of Grantee: | Blinq Networks Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | HUB and RBM MODULE |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 MO | 15E | 5740.0 - 5810.0 | 0.286 | ||
| 38 MO | 15E | 5180.0 - 5240.0 | 0.276 | ||
| 38 MO | 15E | 5755.0 - 5825.0 | 0.277 | ||
| 38 MO | 15E | 5745.0 - 5835.0 | 0.197 |
| Power Output listed is aggregated conducted. Professional installation is required. The antennas used for this transmitter must be installed to provide a separation distance of at least 60 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application pQUDxrFAX1jxCi9eP2vE6g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Blinq Networks Inc. 140 Renfrew Drive Suite 200 Markham, L3R 6B3 Canada |
Date of Grant: 10/21/2015 Application Dated: 10/06/2015 |
| Attention: Jim Dickerman , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ROR00000003 |
| Name of Grantee: | Blinq Networks Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | HUB and RBM MODULE |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 MO | 15E | 5740.0 - 5810.0 | 0.286 | ||
| 38 MO | 15E | 5180.0 - 5240.0 | 0.276 | ||
| 38 MO | 15E | 5755.0 - 5825.0 | 0.277 | ||
| 38 MO | 15E | 5745.0 - 5835.0 | 0.197 |
| Power Output listed is aggregated conducted. Professional installation is required. The antennas used for this transmitter must be installed to provide a separation distance of at least 60 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 05/01/2014 Application Dated: 05/01/2014 |
| Blinq Networks Inc. |
| 140 Renfrew Drive |
| Suite 200 |
| Markham, L3R 6B3 Canada |
| Attention: Jim Dickerman , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ROR00000003 |
| Name of Grantee: | Blinq Networks Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | HUB AND RBM MODULE |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15E | 5740.0 - 5810.0 | 0.286 |
| Power Output listed is aggregated conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 50 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application PEnt0LKVfn3EBoW7Ipq0NQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Blinq Networks Inc. 140 Renfrew Drive Suite 200 Markham, L3R 6B3 Canada |
Date of Grant: 05/01/2014 Application Dated: 05/01/2014 |
| Attention: Jim Dickerman , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ROR00000003 |
| Name of Grantee: | Blinq Networks Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | HUB AND RBM MODULE |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15E | 5740.0 - 5810.0 | 0.286 |
| Power Output listed is aggregated conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 50 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |