FCC ID ROR1002
WLTFGT-145ACN LTE CAT 12/13 Indoor CPE
by Blinq Networks Inc.
Grantee Code: ROR Product Code: 1002
Latest application date: 2021-03-09
FCC ID Device Details
| FCC ID | ROR1002 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | ROR |
| Product Code | 1002 |
| Applicant Business | Blinq Networks Inc. 🇨🇦 |
| Related Domains |  blinqnetworks.com |
| Equipment Class | WLTFGT-145ACN LTE CAT 12/13 Indoor CPE |
| Test Firm | International Certification Corporation |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: MXF-WLTFGT145CBSD Grant Date: 02/17/2021 | 2021-03-09 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: MXF-WLTFGT145CBSD Grant Date: 02/17/2021 | 2021-03-09 |
| 3555-3690 MHz | Change in identification of presently authorized equipment. Original FCC ID: MXF-WLTFGT145CBSD Grant Date: 02/17/2021 | 2021-03-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2021-03-09 | PDF 1.3 MB |
| Label Sample & Location | ID Label/Location Info | 2021-03-09 | PDF 228.9 KB |
| Lable Sample & Location | ID Label/Location Info | 2021-03-09 | PDF 228.9 KB |
| Change ID - applicant | Cover Letter(s) | 2021-03-09 | PDF 247.2 KB |
| Change ID - original | Cover Letter(s) | 2021-03-09 | PDF 19.4 KB |
| POA Letter | Cover Letter(s) | 2021-03-09 | PDF 235.3 KB |
Application Information
| Application ID | yAp3acZh7725AbHa/POfNw== |
|---|---|
| Final Action Date | 2021-03-09 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: MXF-WLTFGT145CBSD Grant Date: 02/17/2021 |
| Applicant FRN | 0022440390 |
| Model | 1002 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WLTFGT-145ACN LTE CAT 12/13 Indoor CPE |
| Responsible Party | Jim Dickerman, Vice President Engineering, jim.dickerman@blinqnetworks.com , 416-214-4204 |
| Test Firm | Jeff Chuang, International Certification Corporation, jeff@icertifi.com.tw  , 886-3-271-8620 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is maximum power conducted. Professional installation is required. This device must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| yAp3acZh7725AbHa/POfNw== | 2021-03-09 | Change in identification of presently authorized equipment. Original FCC ID: MXF-WLTFGT145CBSD Grant Date: 02/17/2021 |
| y95DE5IAK/zQH5+ySlqWtw== | 2021-03-09 | Change in identification of presently authorized equipment. Original FCC ID: MXF-WLTFGT145CBSD Grant Date: 02/17/2021 |
| MFG6CXIx38dO4V2+OJgj0g== | 2021-03-09 | Change in identification of presently authorized equipment. Original FCC ID: MXF-WLTFGT145CBSD Grant Date: 02/17/2021 |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 2412-2462 MHz | 0.4070000 | 15C | CC, MO | ||
| 3555-3695 MHz | 0.547 | 0.015ppm | 8M93W7D | 96 | 40, EP, MO |
| 3555-3695 MHz | 0.634 | 0.015ppm | 17M8G7D | 96 | 40, EP, MO |
| 3555-3695 MHz | 0.635 | 0.015ppm | 17M9W7D | 96 | 40, EP, MO |
| 3555-3690 MHz | 0.693 | 0.015ppm | 26M7G7D | 96 | 40, EP, MO |
| 3555-3690 MHz | 0.687 | 0.015ppm | 26M8W7D | 96 | 40, EP, MO |
| 3560-3695 MHz | 0.637 | 0.015ppm | 26M8W7D | 96 | 40, EP, MO |
| 3560-3690 MHz | 0.692 | 0.015ppm | 35M7G7D | 96 | 40, EP, MO |
| 3560-3690 MHz | 0.692 | 0.015ppm | 35M7W7D | 96 | 40, EP, MO |
| 3560-3690 MHz | 0.7 | 0.015ppm | 17M8G7D | 96 | 40, EP, MO |
| 3560-3690 MHz | 0.535 | 0.015ppm | 17M8W7D | 96 | 40, EP, MO |
| 3560-3695 MHz | 0.644 | 0.015ppm | 26M8G7D | 96 | 40, EP, MO |
| 5180-5240 MHz | 0.417 | 15E | CC, MO | ||
| 5745-5825 MHz | 0.467 | 15E | CC, MO |
Grants
TCB Grant - Application yAp3acZh7725AbHa/POfNw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/09/2021 Application Dated: 03/05/2021 |
| Blinq Networks Inc. |
| 140 Renfrew Drive |
| Suite 200 |
| Markham, L3R 6B3 Canada |
| Attention: Jim Dickerman , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ROR1002 |
| Name of Grantee: | Blinq Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WLTFGT-145ACN LTE CAT 12/13 Indoor CPE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.407 |
| Power listed is maximum power conducted. Professional installation is required. This device must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application yAp3acZh7725AbHa/POfNw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Blinq Networks Inc. 140 Renfrew Drive Suite 200 Markham, L3R 6B3 Canada |
Date of Grant: 03/09/2021 Application Dated: 03/05/2021 |
| Attention: Jim Dickerman , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ROR1002 |
| Name of Grantee: | Blinq Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WLTFGT-145ACN LTE CAT 12/13 Indoor CPE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.407 |
| Power listed is maximum power conducted. Professional installation is required. This device must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/09/2021 Application Dated: 03/05/2021 |
| Blinq Networks Inc. |
| 140 Renfrew Drive |
| Suite 200 |
| Markham, L3R 6B3 Canada |
| Attention: Jim Dickerman , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ROR1002 |
| Name of Grantee: | Blinq Networks Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLTFGT-145ACN LTE CAT 12/13 Indoor CPE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.417 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.467 |
| Power listed is maximum power conducted. This device is restricted to indoor use only. Professional installation is required. This device must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application y95DE5IAK/zQH5+ySlqWtw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Blinq Networks Inc. 140 Renfrew Drive Suite 200 Markham, L3R 6B3 Canada |
Date of Grant: 03/09/2021 Application Dated: 03/05/2021 |
| Attention: Jim Dickerman , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ROR1002 |
| Name of Grantee: | Blinq Networks Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLTFGT-145ACN LTE CAT 12/13 Indoor CPE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.417 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.467 |
| Power listed is maximum power conducted. This device is restricted to indoor use only. Professional installation is required. This device must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/09/2021 Application Dated: 03/05/2021 |
| Blinq Networks Inc. |
| 140 Renfrew Drive |
| Suite 200 |
| Markham, L3R 6B3 Canada |
| Attention: Jim Dickerman , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ROR1002 |
| Name of Grantee: | Blinq Networks Inc. |
| Equipment Class: | Citizens Band Category A and B Devices |
| Notes: | WLTFGT-145ACN LTE CAT 12/13 Indoor CPE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 40 EP MO | 96 | 3555.0 - 3695.0 | 0.667 | 0.015 PM | 8M93G7D |
| 40 EP MO | 96 | 3555.0 - 3695.0 | 0.547 | 0.015 PM | 8M93W7D |
| 40 EP MO | 96 | 3560.0 - 3690.0 | 0.7 | 0.015 PM | 17M8G7D |
| 40 EP MO | 96 | 3560.0 - 3690.0 | 0.535 | 0.015 PM | 17M8W7D |
| 40 EP MO | 96 | 3555.0 - 3695.0 | 0.634 | 0.015 PM | 17M8G7D |
| 40 EP MO | 96 | 3555.0 - 3695.0 | 0.635 | 0.015 PM | 17M9W7D |
| 40 EP MO | 96 | 3555.0 - 3690.0 | 0.693 | 0.015 PM | 26M7G7D |
| 40 EP MO | 96 | 3555.0 - 3690.0 | 0.687 | 0.015 PM | 26M8W7D |
| 40 EP MO | 96 | 3560.0 - 3695.0 | 0.644 | 0.015 PM | 26M8G7D |
| 40 EP MO | 96 | 3560.0 - 3695.0 | 0.637 | 0.015 PM | 26M8W7D |
| 40 EP MO | 96 | 3560.0 - 3690.0 | 0.692 | 0.015 PM | 35M7G7D |
| 40 EP MO | 96 | 3560.0 - 3690.0 | 0.692 | 0.015 PM | 35M7W7D |
| Output Power is EIRP. Professional installation is required. This transmitter operates as a CPE-CBSD. This device must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device supports LTE of 10, 20, 10+10, 10+20, 20+10, and 20+20 MHz bandwidth modes for TDD LTE Band 48. Installers and end-users must be provided with installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. This device supports Intra-Band Non-Contiguous CA. |
| 40: | This device may be operated as a CBSD-CPE subject to configuration and control protocols as specified in the filing. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application MFG6CXIx38dO4V2+OJgj0g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Blinq Networks Inc. 140 Renfrew Drive Suite 200 Markham, L3R 6B3 Canada |
Date of Grant: 03/09/2021 Application Dated: 03/05/2021 |
| Attention: Jim Dickerman , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ROR1002 |
| Name of Grantee: | Blinq Networks Inc. |
| Equipment Class: | Citizens Band Category A and B Devices |
| Notes: | WLTFGT-145ACN LTE CAT 12/13 Indoor CPE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 40 EP MO | 96 | 3555.0 - 3695.0 | 0.667 | 0.015 PM | 8M93G7D |
| 40 EP MO | 96 | 3555.0 - 3695.0 | 0.547 | 0.015 PM | 8M93W7D |
| 40 EP MO | 96 | 3560.0 - 3690.0 | 0.7 | 0.015 PM | 17M8G7D |
| 40 EP MO | 96 | 3560.0 - 3690.0 | 0.535 | 0.015 PM | 17M8W7D |
| 40 EP MO | 96 | 3555.0 - 3695.0 | 0.634 | 0.015 PM | 17M8G7D |
| 40 EP MO | 96 | 3555.0 - 3695.0 | 0.635 | 0.015 PM | 17M9W7D |
| 40 EP MO | 96 | 3555.0 - 3690.0 | 0.693 | 0.015 PM | 26M7G7D |
| 40 EP MO | 96 | 3555.0 - 3690.0 | 0.687 | 0.015 PM | 26M8W7D |
| 40 EP MO | 96 | 3560.0 - 3695.0 | 0.644 | 0.015 PM | 26M8G7D |
| 40 EP MO | 96 | 3560.0 - 3695.0 | 0.637 | 0.015 PM | 26M8W7D |
| 40 EP MO | 96 | 3560.0 - 3690.0 | 0.692 | 0.015 PM | 35M7G7D |
| 40 EP MO | 96 | 3560.0 - 3690.0 | 0.692 | 0.015 PM | 35M7W7D |
| Output Power is EIRP. Professional installation is required. This transmitter operates as a CPE-CBSD. This device must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device supports LTE of 10, 20, 10+10, 10+20, 20+10, and 20+20 MHz bandwidth modes for TDD LTE Band 48. Installers and end-users must be provided with installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. This device supports Intra-Band Non-Contiguous CA. |
| 40: | This device may be operated as a CBSD-CPE subject to configuration and control protocols as specified in the filing. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |