FCC ID RPD-SA5250MPCI-01
2.4 GHz/5.2 GHz IEEE 802.11a/b/g WLAN MiniPCI card
by Philips Semiconductors Dresden AG
Grantee Code: RPD Product Code: SA5250MPCI01
Latest application date: 2004-01-06
FCC ID Device Details
| FCC ID | RPD-SA5250MPCI-01 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RPD |
| Product Code | SA5250MPCI01 |
| Applicant Business | Philips Semiconductors Dresden AG 🇩🇪 |
| Related Domains |  philips.com |
| Equipment Class | 2.4 GHz/5.2 GHz IEEE 802.11a/b/g WLAN MiniPCI card |
| Test Firm | Eurofins Product Service GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2004-01-06 |
| 5150-5250 MHz | Original Equipment | 2004-01-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| usermanual | Users Manual | 2004-01-06 | PDF 845.4 KB |
| user manual | Users Manual | 2004-01-05 | PDF 845.4 KB |
| internal photo | Internal Photos | 2004-01-06 | PDF 416.1 KB |
| internal photos | Internal Photos | 2004-01-05 | PDF 416.1 KB |
| external photos | External Photos | 2004-01-06 | PDF 196.2 KB |
| label location | ID Label/Location Info | 2004-01-06 | PDF 759.3 KB |
| label sample | ID Label/Location Info | 2004-01-06 | PDF 759.3 KB |
| test setup | Test Setup Photos | 2004-01-06 | PDF 404.7 KB |
| test setup photos | Test Setup Photos | 2004-01-05 | PDF 404.7 KB |
| report I part II | Test Report | 2004-01-06 | PDF 1.9 MB |
| report I part II sub I | Test Report | 2004-01-06 | PDF 1.4 MB |
| report I part II sub II | Test Report | 2004-01-06 | PDF 561.1 KB |
| report II part II | Test Report | 2004-01-06 | PDF 2.1 MB |
| report II part II sub I | Test Report | 2004-01-06 | PDF 1.5 MB |
| report II part II sub II | Test Report | 2004-01-06 | PDF 654.6 KB |
| report III part II | Test Report | 2004-01-06 | PDF 1.8 MB |
| test report I | Test Report | 2004-01-06 | PDF 305.2 KB |
| test report II | Test Report | 2004-01-06 | PDF 301.3 KB |
| test report III | Test Report | 2004-01-06 | PDF 310.3 KB |
| confidential request | Cover Letter(s) | 2004-01-06 | PDF 104.7 KB |
| confidentialrequest | Cover Letter(s) | 2004-01-05 | PDF 104.7 KB |
| RF exposure I | RF Exposure Info | 2004-01-05 | PDF 114.7 KB |
| RF exposure II | RF Exposure Info | 2004-01-05 | PDF 115.7 KB |
| block diagram Metadata only | Block Diagram | PDF 14 KB | |
| blockdiagram Metadata only | Block Diagram | PDF 14 KB | |
| schematic Metadata only | Schematics | PDF 109.4 KB | |
| schematics Metadata only | Schematics | PDF 109.4 KB | |
| antenna specification Metadata only | Operational Description | PDF 293.7 KB | |
| antennaspec Metadata only | Operational Description | PDF 293.7 KB | |
| operational description Metadata only | Operational Description | PDF 23.4 KB |
Application Information
| Application ID | goIDCZxvb/IBKvajSqqNkw== |
|---|---|
| Final Action Date | 2004-01-06 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0009895731 |
| Model | SA5250MPCI-01 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 2.4 GHz/5.2 GHz IEEE 802.11a/b/g WLAN MiniPCI card |
| Responsible Party | Jens Bretschneider, Dipl.-Ing., Jens.Bretschneider@philips.com , +49-351-80800-519 |
| Technical Contact | Jens Bretschneider, Philips Semiconductors Dresden AG, Jens.Bretschneider@philips.com , +49-351-80800 |
| Non-Technical Contact | Thomas Oberthuer, hilips Semiconductors Dresden AG, Thomas.Oberthuer@philips.com , +49-351-80800 |
| Test Firm | Robert Kschiwan-Kaspar, Eurofins Product Service GmbH, rkk@eurofins.de  , 49-33631-888-000 |
| TCB Email | griep@ets-bzt.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | power output is conducted. Approval is limited to OEM installation only,user installation is prohibited. Only antenna(s) documented in this filing can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antennas or transmitters. OEM integraters must be provides with installation instructions and operation conditions for satisfying RF exposure compliance! This grant is valid only for the specific test setup configuration as specified in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| goIDCZxvb/IBKvajSqqNkw== | 2004-01-06 | Original Equipment |
| JcrhfFcay5+zst2Yg4mndA== | 2004-01-05 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application JcrhfFcay5+zst2Yg4mndA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 01/05/2004 Application Dated: 01/05/2004 |
| Philips Semiconductors Dresden AG |
| Am Waldschloesschen 1 |
| Dresden, 01099 Germany |
| Attention: Jens Bretschneider , Dipl.-Ing. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RPD-SA5250MPCI-01 |
| Name of Grantee: | Philips Semiconductors Dresden AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2.4 GHz/5.2 GHz IEEE 802.11a/b/g WLAN MiniPCI card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15E | 5150.0 - 5250.0 | 0.0183 | 20.0 PM | W7D |
| 15E | 5250.0 - 5350.0 | 0.0207 | 20.0 PM | W7D |
| power output is conducted. Approval is limited to OEM installation only,user installation is prohibited. Only antenna(s) documented in this filing can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antennas or transmitters. OEM integraters must be provides with installation instructions and operation conditions for satisfying RF exposure compliance! This grant is valid only for the specific test setup configuration as specified in this filing. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application JcrhfFcay5+zst2Yg4mndA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philips Semiconductors Dresden AG Am Waldschloesschen 1 Dresden, 01099 Germany |
Date of Grant: 01/05/2004 Application Dated: 01/05/2004 |
| Attention: Jens Bretschneider , Dipl.-Ing. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RPD-SA5250MPCI-01 |
| Name of Grantee: | Philips Semiconductors Dresden AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2.4 GHz/5.2 GHz IEEE 802.11a/b/g WLAN MiniPCI card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15E | 5150.0 - 5250.0 | 0.0183 | 20.0 PM | W7D |
| 15E | 5250.0 - 5350.0 | 0.0207 | 20.0 PM | W7D |
| power output is conducted. Approval is limited to OEM installation only,user installation is prohibited. Only antenna(s) documented in this filing can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antennas or transmitters. OEM integraters must be provides with installation instructions and operation conditions for satisfying RF exposure compliance! This grant is valid only for the specific test setup configuration as specified in this filing. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 01/06/2004 Application Dated: 01/06/2004 |
| Philips Semiconductors Dresden AG |
| Am Waldschloesschen 1 |
| Dresden, 01099 Germany |
| Attention: Jens Bretschneider , Dipl.-Ing. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RPD-SA5250MPCI-01 |
| Name of Grantee: | Philips Semiconductors Dresden AG |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz/5.2 GHz IEEE 802.11a/b/g WLAN MiniPCI card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.158 | 20.0 PM | W7D |
| power output is conducted. Approval is limited to OEM installation only,user installation is prohibited. Only antenna(s) documented in this filing can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antennas or transmitters. OEM integraters must be provides with installation instructions and operation conditions for satisfying RF exposure compliance! This grant is valid only for the specific test setup configuration as specified in this filing. |
EAS Grant - Application goIDCZxvb/IBKvajSqqNkw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philips Semiconductors Dresden AG Am Waldschloesschen 1 Dresden, 01099 Germany |
Date of Grant: 01/06/2004 Application Dated: 01/06/2004 |
| Attention: Jens Bretschneider , Dipl.-Ing. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RPD-SA5250MPCI-01 |
| Name of Grantee: | Philips Semiconductors Dresden AG |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz/5.2 GHz IEEE 802.11a/b/g WLAN MiniPCI card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.158 | 20.0 PM | W7D |
| power output is conducted. Approval is limited to OEM installation only,user installation is prohibited. Only antenna(s) documented in this filing can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antennas or transmitters. OEM integraters must be provides with installation instructions and operation conditions for satisfying RF exposure compliance! This grant is valid only for the specific test setup configuration as specified in this filing. |
| Mail To: |