FCC ID RRK2005090049-1

IEEE 802.11a/b/g MiniPCI Card

by Alpha Networks Inc.

Grantee Code: RRK   Product Code: 20050900491
Latest application date: 2007-04-23

FCC ID Device Details

FCC IDRRK2005090049-1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRRK
Product Code20050900491
Applicant BusinessAlpha Networks Inc. 🇹🇼
Related Domains alphanetworks.com adt.com.tw
Equipment ClassIEEE 802.11a/b/g MiniPCI Card
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-04-23
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2007-04-23
2412-2462 MHzOriginal Equipment2006-07-19
5180-5320 MHzOriginal Equipment2006-07-19

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2007-04-23PDF 304.6 KB
ManualUsers Manual2006-07-19PDF 290 KB
Internal PhotosInternal Photos2007-04-23PDF 277.8 KB
Internal PhotosInternal Photos2006-07-19PDF 1.1 MB
External PhotosExternal Photos2007-04-23PDF 94.9 KB
External PhotosExternal Photos2006-07-19PDF 370.9 KB
LabelID Label/Location Info2006-07-19PDF 13 KB
Label LocationID Label/Location Info2006-07-19PDF 53.7 KB
Operational DescriptionOperational Description2006-07-19PDF 11 KB
Test Setup PhotosTest Setup Photos2007-04-23PDF 164.5 KB
Test Setup PhotosTest Setup Photos2006-07-19PDF 367.6 KB
Test Report 15CTest Report2007-04-23PDF 600.6 KB
Test Report 15ETest Report2007-04-23PDF 865.2 KB
Test ReportTest Report2006-07-19PDF 2.1 MB
Test Report 1Test Report2006-07-19PDF 2.5 MB
Test Report 2Test Report2006-07-19PDF 2 MB
Description of ChangeCover Letter(s)2007-04-23PDF 18.6 KB
AgencyCover Letter(s)2006-07-19PDF 20 KB
Confidentiality RequestCover Letter(s)2006-07-19PDF 20.4 KB
Modular Approval RequestCover Letter(s)2006-07-19PDF 17.3 KB
RF ChipCover Letter(s)2006-07-19PDF 105.2 KB
RF Exposure InfoRF Exposure Info2007-04-23PDF 32.2 KB
RF Exposure InfoRF Exposure Info2006-07-19PDF 102.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 42.7 KB
Schematics Metadata onlySchematicsPDF 406.7 KB

Application Information

Application IDJ4idwqylzl+ug3XEgtcRyA==
Final Action Date2007-04-23
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0010111144
Model2005090049-1
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionIEEE 802.11a/b/g MiniPCI Card
Responsible PartyKelly Tsai, Senior Manager, kelly_tsai@alphanetworks.com , 886-3-5636666
Technical ContactEric Lin, Advance Data Technology Corporation (Hsin Chu), eric_lin@adt.com.tw , 886-3-593-5343
Non-Technical ContactEric Lin, Advance Data Technology Corporation, eric_lin@adt.com.tw , 886-3-593-5343
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-2-2605-2180-3
TCB Emailcertification@curtis-straus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Class II Permissive Change to remove 5.25-5.35G band, also added a new antenna.

Applications

Application IDDatePurpose
J4idwqylzl+ug3XEgtcRyA==2007-04-23Class II permissive change or modification of presently authorized equipment
/MUYRkAy4UcdkXFLkIFh2A==2007-04-23Class II permissive change or modification of presently authorized equipment
WH3MNkLXT64SVbSMPLBWNw==2006-07-19Original Equipment
396SXHqvPB8ruhpIjkqymg==2006-07-19Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.1115CCC
5180-5320 MHz0.153000015ECC
5180-5240 MHz0.049000015ECC
5745-5825 MHz0.14115CCC

Grants

TCB Grant - Application WH3MNkLXT64SVbSMPLBWNw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 07/19/2006

Application Dated: 07/19/2006
Alpha Networks Inc.
No.8, Li-shing 7th Rd.,
Science-based Industrial Park
Hsinchu, 300
Taiwan
 
Attention: Kelly Tsai , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RRK2005090049-1
Name of Grantee:  Alpha Networks Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11a/b/g MiniPCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.11  
CC 15C 5745.0  -  5825.0 0.141  

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application WH3MNkLXT64SVbSMPLBWNw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Alpha Networks Inc.
No.8, Li-shing 7th Rd., Science-based Industrial Park
Hsinchu, 300
Taiwan
  Date of Grant: 07/19/2006

Application Dated: 07/19/2006
 
Attention: Kelly Tsai , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RRK2005090049-1
Name of Grantee:  Alpha Networks Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11a/b/g MiniPCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.11  
CC 15C 5745.0  -  5825.0 0.141  

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application J4idwqylzl+ug3XEgtcRyA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 04/23/2007

Application Dated: 04/23/2007
Alpha Networks Inc.
No.8, Li-shing 7th Rd.,
Science-based Industrial Park
Hsinchu, 300
Taiwan
 
Attention: Kelly Tsai , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RRK2005090049-1
Name of Grantee:  Alpha Networks Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11a/b/g MiniPCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.11  
CC 15C 5745.0  -  5825.0 0.141  

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

Class II Permissive Change to remove 5.25-5.35G band, also added a new antenna.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application J4idwqylzl+ug3XEgtcRyA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Alpha Networks Inc.
No.8, Li-shing 7th Rd., Science-based Industrial Park
Hsinchu, 300
Taiwan
  Date of Grant: 04/23/2007

Application Dated: 04/23/2007
 
Attention: Kelly Tsai , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RRK2005090049-1
Name of Grantee:  Alpha Networks Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11a/b/g MiniPCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.11  
CC 15C 5745.0  -  5825.0 0.141  

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

Class II Permissive Change to remove 5.25-5.35G band, also added a new antenna.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA176612

TCB Grant - Application 396SXHqvPB8ruhpIjkqymg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 07/19/2006

Application Dated: 07/19/2006
Alpha Networks Inc.
No.8, Li-shing 7th Rd.,
Science-based Industrial Park
Hsinchu, 300
Taiwan
 
Attention: Kelly Tsai , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RRK2005090049-1
Name of Grantee:  Alpha Networks Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11a/b/g MiniPCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.153  

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 396SXHqvPB8ruhpIjkqymg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Alpha Networks Inc.
No.8, Li-shing 7th Rd., Science-based Industrial Park
Hsinchu, 300
Taiwan
  Date of Grant: 07/19/2006

Application Dated: 07/19/2006
 
Attention: Kelly Tsai , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RRK2005090049-1
Name of Grantee:  Alpha Networks Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11a/b/g MiniPCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.153  

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application /MUYRkAy4UcdkXFLkIFh2A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 04/23/2007

Application Dated: 04/23/2007
Alpha Networks Inc.
No.8, Li-shing 7th Rd.,
Science-based Industrial Park
Hsinchu, 300
Taiwan
 
Attention: Kelly Tsai , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RRK2005090049-1
Name of Grantee:  Alpha Networks Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11a/b/g MiniPCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

Class II Permissive Change to remove 5.25-5.35G band, also added a new antenna.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application /MUYRkAy4UcdkXFLkIFh2A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Alpha Networks Inc.
No.8, Li-shing 7th Rd., Science-based Industrial Park
Hsinchu, 300
Taiwan
  Date of Grant: 04/23/2007

Application Dated: 04/23/2007
 
Attention: Kelly Tsai , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RRK2005090049-1
Name of Grantee:  Alpha Networks Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11a/b/g MiniPCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

Class II Permissive Change to remove 5.25-5.35G band, also added a new antenna.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA835872