FCC ID RRKGLM100
Wireless Mini PCI Adapter
by Alpha Networks Inc.
Grantee Code: RRK Product Code: GLM100
Latest application date: 2009-04-01
FCC ID Device Details
| FCC ID | RRKGLM100 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RRK |
| Product Code | GLM100 |
| Applicant Business | Alpha Networks Inc. 🇹🇼 |
| Related Domains |  alphanetworks.com |
| Equipment Class | Wireless Mini PCI Adapter |
| Test Firm | Intertek Testing Services Taiwan Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2009-04-01 |
| 2412-2462 MHz | Original Equipment | 2006-11-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| OEM Integrator Manual | Users Manual | 2006-11-29 | PDF 134.2 KB |
| Internal | Internal Photos | 2006-11-29 | PDF 179.3 KB |
| External photo | External Photos | 2009-04-01 | PDF 463.4 KB |
| External | External Photos | 2006-11-29 | PDF 357.6 KB |
| Label | ID Label/Location Info | 2006-11-29 | PDF 111.4 KB |
| Spurious test set up photo | Test Setup Photos | 2009-04-01 | PDF 225.7 KB |
| Conducted | Test Setup Photos | 2006-11-29 | PDF 395.2 KB |
| Radiated | Test Setup Photos | 2006-11-29 | PDF 212.4 KB |
| ID Test report revised1 | Test Report | 2009-04-01 | PDF 1.2 MB |
| Test Report | Test Report | 2006-11-29 | PDF 883.6 KB |
| Class II change letter | Cover Letter(s) | 2009-04-01 | PDF 21.5 KB |
| Confirmation Letter | Cover Letter(s) | 2009-04-01 | PDF 73.5 KB |
| Lettery of Agency | Cover Letter(s) | 2009-04-01 | PDF 73.5 KB |
| Confid Letter | Cover Letter(s) | 2006-11-29 | PDF 60.2 KB |
| Letter of Agency | Cover Letter(s) | 2006-11-29 | PDF 51.3 KB |
| Modular Approval Request | Cover Letter(s) | 2006-11-29 | PDF 20.3 KB |
| MPE | RF Exposure Info | 2009-04-01 | PDF 183.9 KB |
| MPE Estimation | RF Exposure Info | 2006-11-29 | PDF 40.7 KB |
| Block Metadata only | Block Diagram | PDF 177.3 KB | |
| Schema Metadata only | Schematics | PDF 100.1 KB | |
| Technical Description Metadata only | Operational Description | PDF 8.8 KB |
Application Information
| Application ID | MH/n+xdfAqUH6gOB4WI7lA== |
|---|---|
| Final Action Date | 2009-04-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010111144 |
| Model | GLM100 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless Mini PCI Adapter |
| Responsible Party | Kelly Tsai, Senior Manager, kelly_tsai@alphanetworks.com , 886-3-5636666 |
| Technical Contact | Kevin Chen, Intertek Testing Services Taiwan Ltd., Kevin.chen@intertek.com  , (+886)-3-519-1411 |
| Test Firm | Alpha Liu, Intertek Testing Services Taiwan Ltd., alpha.liu@intertek.com , 886-3-519-1411 |
| TCB Email | hotline@atcb.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. Limited Modular Approval (LMA) restricted to OEM installation in configurations where regulated power is available from the host, and the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product integrating this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| MH/n+xdfAqUH6gOB4WI7lA== | 2009-04-01 | Class II permissive change or modification of presently authorized equipment |
| QBrN2TvEDlwRVt9BU2qh0A== | 2006-11-29 | Original Equipment |
Grants
TCB Grant - Application QBrN2TvEDlwRVt9BU2qh0A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/29/2006 Application Dated: 11/28/2006 |
| Alpha Networks Inc. |
| No.8, Li-shing 7th Rd., |
| Science-based Industrial Park |
| Hsinchu, 300 Taiwan |
| Attention: Kelly Tsai , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RRKGLM100 |
| Name of Grantee: | Alpha Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g mini-PCI WLAN Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.081 |
| Power Output listed is Conducted. Limited Modular Approval (LMA) restricted to OEM installation in configurations where regulated power is available from the host, and the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product integrating this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application QBrN2TvEDlwRVt9BU2qh0A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Alpha Networks Inc. No.8, Li-shing 7th Rd., Science-based Industrial Park Hsinchu, 300 Taiwan |
Date of Grant: 11/29/2006 Application Dated: 11/28/2006 |
| Attention: Kelly Tsai , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RRKGLM100 |
| Name of Grantee: | Alpha Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g mini-PCI WLAN Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.081 |
| Power Output listed is Conducted. Limited Modular Approval (LMA) restricted to OEM installation in configurations where regulated power is available from the host, and the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product integrating this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/01/2009 Application Dated: 03/30/2009 |
| Alpha Networks Inc. |
| No.8, Li-shing 7th Rd., |
| Science-based Industrial Park |
| Hsinchu, 300 Taiwan |
| Attention: Kelly Tsai , Senior Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RRKGLM100 |
| Name of Grantee: | Alpha Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Mini PCI Adapter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.081 |
| Power Output listed is Conducted. Limited Modular Approval (LMA) restricted to OEM installation in configurations where regulated power is available from the host, and the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product integrating this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application MH/n+xdfAqUH6gOB4WI7lA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Alpha Networks Inc. No.8, Li-shing 7th Rd., Science-based Industrial Park Hsinchu, 300 Taiwan |
Date of Grant: 04/01/2009 Application Dated: 03/30/2009 |
| Attention: Kelly Tsai , Senior Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RRKGLM100 |
| Name of Grantee: | Alpha Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Mini PCI Adapter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.081 |
| Power Output listed is Conducted. Limited Modular Approval (LMA) restricted to OEM installation in configurations where regulated power is available from the host, and the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product integrating this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |