FCC ID RSL-TQ6702EGEN2

IEEE802.11ax dual-radio 5G/2.4GHz 8x8+4x4 wireless AP

by Allied Telesis K.K.

Grantee Code: RSL   Product Code: TQ6702EGEN2
Latest application date: 2023-02-01

FCC ID Device Details

FCC IDRSL-TQ6702EGEN2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRSL
Product CodeTQ6702EGEN2
Applicant BusinessAllied Telesis K.K. 🇯🇵
Related Domains allied-telesis.co.jp
Equipment ClassIEEE802.11ax dual-radio 5G/2.4GHz 8x8+4x4 wireless AP
Test FirmSporton International Inc. Hsinchu Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-02-01
2412-2462 MHzOriginal Equipment2022-12-27
5180-5240 MHzOriginal Equipment2022-12-27

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-06-25PDF 2.4 MB
Internal PhotosInternal Photos2023-06-25PDF 4.2 MB
External PhotosExternal Photos2023-06-25PDF 1.7 MB
Label and LocationID Label/Location Info2022-12-27PDF 572.7 KB
TSUP DFSTest Setup Photos2023-07-31PDF 264.2 KB
TSUP RFTest Setup Photos2023-07-31PDF 739.7 KB
Test Setup Photos WLAN 2.4GHzTest Setup Photos2023-06-25PDF 816 KB
Test Setup Photos WLAN 5GHzTest Setup Photos2023-06-25PDF 1 MB
Test Report Antenna 1Test Report2023-02-01PDF 4.4 MB
Test Report Antenna 2Test Report2023-02-01PDF 4.8 MB
Test Report Antenna 3Test Report2023-02-01PDF 795.1 KB
Test Report DFSTest Report2023-02-01PDF 2 MB
Test Report Part 1Test Report2023-02-01PDF 4.4 MB
Test Report Part 2Test Report2023-02-01PDF 4.8 MB
Antenna Report 1Test Report2022-12-27PDF 4.4 MB
Antenna Report 2Test Report2022-12-27PDF 4.8 MB
Antenna Report 3Test Report2022-12-27PDF 795.1 KB
Test Report WLAN 2.4GHzTest Report2022-12-27PDF 5.4 MB
Test Report WLAN 5GHz part 1Test Report2022-12-27PDF 4.1 MB
Test Report WLAN 5GHz part 2Test Report2022-12-27PDF 2.8 MB
C2PC LetterCover Letter(s)2023-02-01PDF 28 KB
Confidentiality LetterCover Letter(s)2023-02-01PDF 42.9 KB
POA LetterCover Letter(s)2023-02-01PDF 26.3 KB
TPC LetterCover Letter(s)2023-02-01PDF 20.9 KB
Confidentiality Request LetterCover Letter(s)2022-12-27PDF 44.8 KB
POACover Letter(s)2022-12-27PDF 26.2 KB
Professional Installation DeclarationCover Letter(s)2022-12-27PDF 27.9 KB
RF ExposureRF Exposure Info2023-02-01PDF 528.2 KB
MPE ReportRF Exposure Info2022-12-27PDF 545.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 243.1 KB
Schematics Metadata onlySchematicsPDF 1.1 MB
Operational Description Metadata onlyOperational DescriptionPDF 142.5 KB
Op Desc Software Security Metadata onlySDR Software/Security InfPDF 149 KB
Op Desc Software Security Metadata onlySDR Software/Security InfPDF 149 KB

Application Information

Application IDShKkPoPGE7GvY86FKKLgCg==
Final Action Date2023-02-01
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0009668120
ModelTQ6702EGEN2
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionIEEE802.11ax dual-radio 5G/2.4GHz 8x8+4x4 wireless AP
Responsible PartyShunji Taki, staki@allied-telesis.co.jp , +81 3 5436 8350
Test FirmAlex Chen, Sporton International Inc. Hsinchu Laboratory, alex@sporton.com.tw , +886-3-327-3456
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/31/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsOutput Power listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 51 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20, 40 and 80 MHz bandwidth modes. Class II Permissive Change: Adds master mode function in U-NII Bands 2A and 2C.

Applications

Application IDDatePurpose
ShKkPoPGE7GvY86FKKLgCg==2023-02-01Class II permissive change or modification of presently authorized equipment
jPfjM/+AW3k2gx6nKGpuUw==2022-12-27Original Equipment
Yt3Ca/jK+2bw+rrGGhYQew==2022-12-27Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.361000015CCC, MO
5180-5240 MHz0.26115ECC, MO
5260-5320 MHz0.14915ECC, MO, ND
5500-5720 MHz0.16715ECC, MO, ND
5745-5825 MHz0.7515ECC, MO

Grants

TCB Grant - Application Yt3Ca/jK+2bw+rrGGhYQew==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/27/2022

Application Dated: 12/23/2022
Allied Telesis K.K.
2nd. TOC Bldg. 7-21-11 Nishi-Gotanda
Shinagawa-ku
Tokyo, 1410031
Japan
 
Attention: Shunji Taki

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RSL-TQ6702EGEN2
Name of Grantee:  Allied Telesis K.K.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE802.11ax dual-radio 5G/2.4GHz 8x8+4x4 wireless AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.261  
CC MO 15E 5745.0  -  5825.0 0.75  

Output Power listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 51 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20, 40 and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Yt3Ca/jK+2bw+rrGGhYQew==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Allied Telesis K.K.
2nd. TOC Bldg. 7-21-11 Nishi-Gotanda Shinagawa-ku
Tokyo, 1410031
Japan
  Date of Grant: 12/27/2022

Application Dated: 12/23/2022
 
Attention: Shunji Taki

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RSL-TQ6702EGEN2
Name of Grantee:  Allied Telesis K.K.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE802.11ax dual-radio 5G/2.4GHz 8x8+4x4 wireless AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.261  
CC MO 15E 5745.0  -  5825.0 0.75  

Output Power listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 51 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20, 40 and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ShKkPoPGE7GvY86FKKLgCg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 02/01/2023

Application Dated: 01/20/2023
Allied Telesis K.K.
2nd. TOC Bldg. 7-21-11 Nishi-Gotanda
Shinagawa-ku
Tokyo, 1410031
Japan
 
Attention: Shunji Taki

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RSL-TQ6702EGEN2
Name of Grantee:  Allied Telesis K.K.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE802.11ax dual-radio 5G/2.4GHz 8x8+4x4 wireless AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.261  
CC MO ND 15E 5260.0  -  5320.0 0.149  
CC MO ND 15E 5500.0  -  5720.0 0.167  
CC MO 15E 5745.0  -  5825.0 0.75  

Output Power listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 51 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20, 40 and 80 MHz bandwidth modes.

Class II Permissive Change: Adds master mode function in U-NII Bands 2A and 2C.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ShKkPoPGE7GvY86FKKLgCg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Allied Telesis K.K.
2nd. TOC Bldg. 7-21-11 Nishi-Gotanda Shinagawa-ku
Tokyo, 1410031
Japan
  Date of Grant: 02/01/2023

Application Dated: 01/20/2023
 
Attention: Shunji Taki

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RSL-TQ6702EGEN2
Name of Grantee:  Allied Telesis K.K.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE802.11ax dual-radio 5G/2.4GHz 8x8+4x4 wireless AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.261  
CC MO ND 15E 5260.0  -  5320.0 0.149  
CC MO ND 15E 5500.0  -  5720.0 0.167  
CC MO 15E 5745.0  -  5825.0 0.75  

Output Power listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 51 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20, 40 and 80 MHz bandwidth modes.

Class II Permissive Change: Adds master mode function in U-NII Bands 2A and 2C.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application jPfjM/+AW3k2gx6nKGpuUw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/27/2022

Application Dated: 12/23/2022
Allied Telesis K.K.
2nd. TOC Bldg. 7-21-11 Nishi-Gotanda
Shinagawa-ku
Tokyo, 1410031
Japan
 
Attention: Shunji Taki

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RSL-TQ6702EGEN2
Name of Grantee:  Allied Telesis K.K.
Equipment Class: Digital Transmission System
Notes: IEEE802.11ax dual-radio 5G/2.4GHz 8x8+4x4 wireless AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.361  

Output Power listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 51 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20 and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application jPfjM/+AW3k2gx6nKGpuUw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Allied Telesis K.K.
2nd. TOC Bldg. 7-21-11 Nishi-Gotanda Shinagawa-ku
Tokyo, 1410031
Japan
  Date of Grant: 12/27/2022

Application Dated: 12/23/2022
 
Attention: Shunji Taki

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RSL-TQ6702EGEN2
Name of Grantee:  Allied Telesis K.K.
Equipment Class: Digital Transmission System
Notes: IEEE802.11ax dual-radio 5G/2.4GHz 8x8+4x4 wireless AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.361  

Output Power listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 51 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20 and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: