FCC ID RTP-550-10016-3

Wireless LAN Access Device

by Hewlett Packard Enterprise

Grantee Code: RTP   Product Code: 550100163
Latest application date: 2005-01-14

FCC ID Device Details

FCC IDRTP-550-10016-3
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRTP
Product Code550100163
Applicant BusinessHewlett Packard Enterprise 🇺🇸
Related Domains hpe.com
Equipment ClassWireless LAN Access Device
Test FirmBUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2005-01-14
5180-5240 MHzOriginal Equipment2005-01-14

Exhibits

DocumentTypeAvailableFile
QuickStart GuideUsers Manual2005-01-14PDF 1.7 MB
Internal PhotosInternal Photos2005-01-14PDF 203.8 KB
Internal Photos RF Section DetailedInternal Photos2005-01-14PDF 544.2 KB
External PhotosExternal Photos2005-01-14PDF 211.2 KB
LabelID Label/Location Info2005-01-14PDF 187.9 KB
Test Setup PhotosTest Setup Photos2005-01-14PDF 276.9 KB
2 4GHz Previous ReportTest Report2005-01-14PDF 1.9 MB
5GHz Previous ReportTest Report2005-01-14PDF 3.5 MB
Part 15 B Previous ReportTest Report2005-01-14PDF 662.6 KB
Test DataTest Report2005-01-14PDF 74.1 KB
Test ReportTest Report2005-01-14PDF 440.6 KB
CN3300 NonModificationCover Letter(s)2005-01-14PDF 121.6 KB
Confidentiality RequestCover Letter(s)2005-01-14PDF 37.3 KB
Response to TCB FindingsCover Letter(s)2005-01-14PDF 70.1 KB
RF Exposure InformationRF Exposure Info2005-01-14PDF 115 KB
Block Diagram General Metadata onlyBlock DiagramPDF 10.4 KB
General Block Diagram Metadata onlyBlock DiagramPDF 10.4 KB
RF Block Diagram Metadata onlyBlock DiagramPDF 21.3 KB
Schematics General Metadata onlySchematicsPDF 1.2 MB
Schematics RF Metadata onlySchematicsPDF 243.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 164.3 KB

Application Information

Application IDm2yYfDbpWFqLI56nHThS/g==
Final Action Date2005-01-14
Application PurposeOriginal Equipment
Applicant FRN0010292464
Model550-10016-3
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless LAN Access Device
Responsible PartyKenneth Klingler, Senior Regulatory Engineer, ken.klingler@hpe.com , 916-785-3134
Test FirmDori Robertson, BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC., dolores.robertson@us.bureauveritas.com , 978 486 8880
TCB Emailcertification@curtis-straus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted at the antenna terminal. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in the 5.15-5.25 GHz band is restricted to indoors only.

Applications

Application IDDatePurpose
m2yYfDbpWFqLI56nHThS/g==2005-01-14Original Equipment
8qTy2HvYye9HwY5bArnNOA==2005-01-14Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.069000015C18, 19, CC
5180-5240 MHz0.02215E18, 19, CC
5280-5320 MHz0.10215E18, 19, CC
5745-5805 MHz0.10115E18, 19, CC

Grants

TCB Grant - Application m2yYfDbpWFqLI56nHThS/g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 01/14/2005

Application Dated: 01/14/2005
Hewlett Packard Enterprise
8000 Foothills Blvd.
Roseville, CA 95747
 
Attention: Kenneth Klingler , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTP-550-10016-3
Name of Grantee:  Hewlett Packard Enterprise
Equipment Class: Digital Transmission System
Notes: Wireless LAN Access Device
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
18 19 CC 15C 2412.0  -  2462.0 0.069  

Power listed is conducted at the antenna terminal. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Operation in the 5.15-5.25 GHz band is restricted to indoors only.


18: This device must be supplied with a shielded A.C. power cord if one is required to ensure compliance.
19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application m2yYfDbpWFqLI56nHThS/g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise
8000 Foothills Blvd.
Roseville, CA 95747
United States
  Date of Grant: 01/14/2005

Application Dated: 01/14/2005
 
Attention: Kenneth Klingler , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTP-550-10016-3
Name of Grantee:  Hewlett Packard Enterprise
Equipment Class: Digital Transmission System
Notes: Wireless LAN Access Device
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
18 19 CC 15C 2412.0  -  2462.0 0.069  

Power listed is conducted at the antenna terminal. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Operation in the 5.15-5.25 GHz band is restricted to indoors only.


18: This device must be supplied with a shielded A.C. power cord if one is required to ensure compliance.
19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8qTy2HvYye9HwY5bArnNOA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 01/14/2005

Application Dated: 01/14/2005
Hewlett Packard Enterprise
8000 Foothills Blvd.
Roseville, CA 95747
 
Attention: Kenneth Klingler , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTP-550-10016-3
Name of Grantee:  Hewlett Packard Enterprise
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN Access Device
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
18 19 CC 15E 5180.0  -  5240.0 0.022  
18 19 CC 15E 5280.0  -  5320.0 0.102  
18 19 CC 15E 5745.0  -  5805.0 0.101  

Power listed is conducted at the antenna terminal. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Operation in the 5.15-5.25 GHz band is restricted to indoors only.


18: This device must be supplied with a shielded A.C. power cord if one is required to ensure compliance.
19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 8qTy2HvYye9HwY5bArnNOA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise
8000 Foothills Blvd.
Roseville, CA 95747
United States
  Date of Grant: 01/14/2005

Application Dated: 01/14/2005
 
Attention: Kenneth Klingler , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTP-550-10016-3
Name of Grantee:  Hewlett Packard Enterprise
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN Access Device
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
18 19 CC 15E 5180.0  -  5240.0 0.022  
18 19 CC 15E 5280.0  -  5320.0 0.102  
18 19 CC 15E 5745.0  -  5805.0 0.101  

Power listed is conducted at the antenna terminal. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Operation in the 5.15-5.25 GHz band is restricted to indoors only.


18: This device must be supplied with a shielded A.C. power cord if one is required to ensure compliance.
19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: