FCC ID RTP-550-10016-4

Wireless LAN access device

by Hewlett Packard Enterprise

Grantee Code: RTP   Product Code: 550100164
Latest application date: 2005-06-24

FCC ID Device Details

FCC IDRTP-550-10016-4
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRTP
Product Code550100164
Applicant BusinessHewlett Packard Enterprise 🇺🇸
Related Domains hpe.com
Equipment ClassWireless LAN access device
Test FirmBUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2005-06-24
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-06-24
2412-2462 MHzOriginal Equipment2005-01-25
5180-5240 MHzOriginal Equipment2005-01-25

Exhibits

DocumentTypeAvailableFile
Installation GuideUsers Manual2005-01-25PDF 84 KB
Internal PhotosInternal Photos2005-06-24PDF 323.1 KB
Internal Photos RF SectionInternal Photos2005-06-24PDF 231.1 KB
Internal PhotosInternal Photos2005-01-25PDF 170.6 KB
Internal Photos RF section without shieldInternal Photos2005-01-25PDF 196.2 KB
External PhotosExternal Photos2005-06-24PDF 218.1 KB
External PhotosExternal Photos2005-01-25PDF 130.6 KB
LabelID Label/Location Info2005-01-25PDF 101.2 KB
Antenna Specifications Part 1Operational Description2005-01-25PDF 2.8 MB
Antenna Specifications Part 2Operational Description2005-01-25PDF 2.9 MB
Antenna Specifications Part 3Operational Description2005-01-25PDF 2.4 MB
Test Setup PhotosTest Setup Photos2005-06-24PDF 315.3 KB
Test Setup PhotosTest Setup Photos2005-01-25PDF 249.3 KB
Test Data Above 2GHzTest Report2005-06-24PDF 22 KB
Test ReportTest Report2005-06-24PDF 1.2 MB
Test ReportTest Report2005-01-25PDF 579 KB
Class II PC Cover LetterCover Letter(s)2005-06-24PDF 46.9 KB
Response to TCB FindingsCover Letter(s)2005-06-24PDF 48.8 KB
Confidentiality RequestCover Letter(s)2005-01-25PDF 136.3 KB
Response to TCB FindingsCover Letter(s)2005-01-25PDF 76.7 KB
RF Exposure 802 11a 5 2GRF Exposure Info2005-01-25PDF 70.2 KB
RF Exposure 802 11a 5 7GRF Exposure Info2005-01-25PDF 69.9 KB
RF Exposure 802 11bRF Exposure Info2005-01-25PDF 70.2 KB
RF Exposure 802 11gRF Exposure Info2005-01-25PDF 70.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 214 KB
Schematics Metadata onlySchematicsPDF 227.7 KB
Operational Description Metadata onlyOperational DescriptionPDF 89.3 KB

Application Information

Application IDr7KrNld+6aSSKifrlJo8lw==
Final Action Date2005-06-24
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0010292464
Model550-10016-4
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless LAN access device
Responsible PartyKenneth Klingler, Senior Regulatory Engineer, ken.klingler@hpe.com , 916-785-3134
Test FirmDori Robertson, BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC., dolores.robertson@us.bureauveritas.com , 978 486 8880
TCB Emailcertification@curtis-straus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change filing. Power listed is conducted at the antenna terminal. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in the 5.15-5.25 GHz band is restricted to indoors only.

Applications

Application IDDatePurpose
r7KrNld+6aSSKifrlJo8lw==2005-06-24Class II permissive change or modification of presently authorized equipment
1JtcNJUfl1iuEPEJfYO3Zw==2005-06-24Class II permissive change or modification of presently authorized equipment
e4y69AbPqknShms6QPkgvw==2005-01-25Original Equipment
0bom76lC7AGJTZAG1oE+Ow==2005-01-25Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.043000015C16, 28, CC
2412-2462 MHz0.043000015C18, CC
5180-5240 MHz0.03215E18, CC
5180-5240 MHz0.03215E16, 28, CC
5745-5805 MHz0.01315E18, CC
5745-5805 MHz0.01315E16, 28, CC

Grants

TCB Grant - Application r7KrNld+6aSSKifrlJo8lw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 06/24/2005

Application Dated: 06/24/2005
Hewlett Packard Enterprise
8000 Foothills Blvd.
Roseville, CA 95747
 
Attention: Kenneth Klingler , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTP-550-10016-4
Name of Grantee:  Hewlett Packard Enterprise
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN access device
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
16 28 CC 15E 5180.0  -  5240.0 0.032  
16 28 CC 15E 5745.0  -  5805.0 0.013  

Class II permissive change filing.

Power listed is conducted at the antenna terminal. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Operation in the 5.15-5.25 GHz band is restricted to indoors only.


16: If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement.
28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application r7KrNld+6aSSKifrlJo8lw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise
8000 Foothills Blvd.
Roseville, CA 95747
United States
  Date of Grant: 06/24/2005

Application Dated: 06/24/2005
 
Attention: Kenneth Klingler , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTP-550-10016-4
Name of Grantee:  Hewlett Packard Enterprise
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN access device
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
16 28 CC 15E 5180.0  -  5240.0 0.032  
16 28 CC 15E 5745.0  -  5805.0 0.013  

Class II permissive change filing.

Power listed is conducted at the antenna terminal. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Operation in the 5.15-5.25 GHz band is restricted to indoors only.


16: If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement.
28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application e4y69AbPqknShms6QPkgvw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 01/25/2005

Application Dated: 01/25/2005
Hewlett Packard Enterprise
8000 Foothills Blvd.
Roseville, CA 95747
 
Attention: Kenneth Klingler , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTP-550-10016-4
Name of Grantee:  Hewlett Packard Enterprise
Equipment Class: Digital Transmission System
Notes: Wireless LAN access device
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
18 CC 15C 2412.0  -  2462.0 0.043  

Power listed is conducted at the antenna terminal. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Operation in the 5.15-5.25 GHz band is restricted to indoors only.


18: This device must be supplied with a shielded A.C. power cord if one is required to ensure compliance.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application e4y69AbPqknShms6QPkgvw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise
8000 Foothills Blvd.
Roseville, CA 95747
United States
  Date of Grant: 01/25/2005

Application Dated: 01/25/2005
 
Attention: Kenneth Klingler , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTP-550-10016-4
Name of Grantee:  Hewlett Packard Enterprise
Equipment Class: Digital Transmission System
Notes: Wireless LAN access device
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
18 CC 15C 2412.0  -  2462.0 0.043  

Power listed is conducted at the antenna terminal. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Operation in the 5.15-5.25 GHz band is restricted to indoors only.


18: This device must be supplied with a shielded A.C. power cord if one is required to ensure compliance.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 1JtcNJUfl1iuEPEJfYO3Zw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 06/24/2005

Application Dated: 06/24/2005
Hewlett Packard Enterprise
8000 Foothills Blvd.
Roseville, CA 95747
 
Attention: Kenneth Klingler , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTP-550-10016-4
Name of Grantee:  Hewlett Packard Enterprise
Equipment Class: Digital Transmission System
Notes: Wireless LAN access device
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
16 28 CC 15C 2412.0  -  2462.0 0.043  

Class II permissive change filing.

Power listed is conducted at the antenna terminal. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Operation in the 5.15-5.25 GHz band is restricted to indoors only.


16: If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement.
28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 1JtcNJUfl1iuEPEJfYO3Zw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise
8000 Foothills Blvd.
Roseville, CA 95747
United States
  Date of Grant: 06/24/2005

Application Dated: 06/24/2005
 
Attention: Kenneth Klingler , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTP-550-10016-4
Name of Grantee:  Hewlett Packard Enterprise
Equipment Class: Digital Transmission System
Notes: Wireless LAN access device
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
16 28 CC 15C 2412.0  -  2462.0 0.043  

Class II permissive change filing.

Power listed is conducted at the antenna terminal. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Operation in the 5.15-5.25 GHz band is restricted to indoors only.


16: If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement.
28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 0bom76lC7AGJTZAG1oE+Ow==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 01/25/2005

Application Dated: 01/25/2005
Hewlett Packard Enterprise
8000 Foothills Blvd.
Roseville, CA 95747
 
Attention: Kenneth Klingler , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTP-550-10016-4
Name of Grantee:  Hewlett Packard Enterprise
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN access device
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
18 CC 15E 5180.0  -  5240.0 0.032  
18 CC 15E 5745.0  -  5805.0 0.013  

Power listed is conducted at the antenna terminal. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Operation in the 5.15-5.25 GHz band is restricted to indoors only.


18: This device must be supplied with a shielded A.C. power cord if one is required to ensure compliance.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 0bom76lC7AGJTZAG1oE+Ow==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise
8000 Foothills Blvd.
Roseville, CA 95747
United States
  Date of Grant: 01/25/2005

Application Dated: 01/25/2005
 
Attention: Kenneth Klingler , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTP-550-10016-4
Name of Grantee:  Hewlett Packard Enterprise
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN access device
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
18 CC 15E 5180.0  -  5240.0 0.032  
18 CC 15E 5745.0  -  5805.0 0.013  

Power listed is conducted at the antenna terminal. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Operation in the 5.15-5.25 GHz band is restricted to indoors only.


18: This device must be supplied with a shielded A.C. power cord if one is required to ensure compliance.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: