FCC ID RTP-55010016-2

Wireless Access Point

by Hewlett Packard Enterprise

Grantee Code: RTP   Product Code: 550100162
Latest application date: 2004-04-14

FCC ID Device Details

FCC IDRTP-55010016-2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRTP
Product Code550100162
Applicant BusinessHewlett Packard Enterprise 🇺🇸
Related Domains hpe.com colubris.com
Equipment ClassWireless Access Point
Test FirmIntertek Testing Services NA Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5280-5320 MHzOriginal Equipment2004-04-14
2412-2462 MHzOriginal Equipment2004-04-14

Exhibits

DocumentTypeAvailableFile
Installation Manual Part 1Users Manual2004-04-14PDF 2.9 MB
Installation Manual Part 2Users Manual2004-04-14PDF 2.4 MB
External PhotosExternal Photos2004-04-14PDF 174.5 KB
LabelID Label/Location Info2004-04-14PDF 23.1 KB
Label LocationID Label/Location Info2004-04-14PDF 88.1 KB
Location InfoID Label/Location Info2004-04-14PDF 88.1 KB
5 GHz RF SchematicSchematics2004-04-14PDF 25.6 KB
Test Setup PhotosTest Setup Photos2004-04-14PDF 567.5 KB
Conducted DataTest Report2004-04-14PDF 1.9 MB
Test ReportTest Report2004-04-14PDF 1 MB
Test ReportTest Report2004-04-14PDF 1.3 MB
Attestation of Channel LimitAttestation Statements2004-04-14PDF 884.2 KB
Attestation of NII shutoffAttestation Statements2004-04-14PDF 884.9 KB
CorrespondenceCover Letter(s)2004-04-14PDF 68.9 KB
CorrespondenceCover Letter(s)2004-04-14PDF 69 KB
Request for ConfidentialityCover Letter(s)2004-04-14PDF 1.4 MB
Request for ConfidentialityCover Letter(s)2004-04-14PDF 1.4 MB
RF ExposureRF Exposure Info2004-04-14PDF 51.1 KB
RF Exposure InformationRF Exposure Info2004-04-14PDF 51.1 KB

Application Information

Application IDyZK99gKJDqV2eWlgaBKt6A==
Final Action Date2004-04-14
Application PurposeOriginal Equipment
Applicant FRN0010292464
Model55010016-2
Frequency Range5280-5320 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless Access Point
Responsible PartyKenneth Klingler, Senior Regulatory Engineer, ken.klingler@hpe.com , 916-785-3134
AgentJohn John John, Colubris Networks Inc., john.ohara@colubris.com , 781 684 0001
Technical ContactClaude Robitaille, Colubris Networks Inc., claude.robitaille@colubris.com , 450 680 1661
Non-Technical ContactJonathan Zarkower, Colubris Networks Inc., jonathan.zarkower@colubris.com , 781 684 0001
Test FirmRoland Gubisch, Intertek Testing Services NA Inc., rgubisch@itsqs.com , 978-635-8500
TCB Emailtcb_admin@intertek.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput is peak conducted. This device and its antenna(s) must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
yZK99gKJDqV2eWlgaBKt6A==2004-04-14Original Equipment
umHPUPXibHnsyayvQco8yg==2004-04-14Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.018600015CCC, CE
5280-5320 MHz0.04615ECC, CE
5745-5805 MHz0.11515E

Grants

TCB Grant - Application yZK99gKJDqV2eWlgaBKt6A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
Date of Grant: 04/14/2004

Application Dated: 04/14/2004
Hewlett Packard Enterprise
8000 Foothills Blvd.
Roseville, CA 95747
 
Attention: Kenneth Klingler , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTP-55010016-2
Name of Grantee:  Hewlett Packard Enterprise
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15E 5280.0  -  5320.0 0.046  
15E 5745.0  -  5805.0 0.115  

Output is peak conducted. This device and its antenna(s) must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application yZK99gKJDqV2eWlgaBKt6A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise
8000 Foothills Blvd.
Roseville, CA 95747
United States
  Date of Grant: 04/14/2004

Application Dated: 04/14/2004
 
Attention: Kenneth Klingler , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTP-55010016-2
Name of Grantee:  Hewlett Packard Enterprise
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15E 5280.0  -  5320.0 0.046  
15E 5745.0  -  5805.0 0.115  

Output is peak conducted. This device and its antenna(s) must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application umHPUPXibHnsyayvQco8yg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
Date of Grant: 04/14/2004

Application Dated: 04/14/2004
Hewlett Packard Enterprise
8000 Foothills Blvd.
Roseville, CA 95747
 
Attention: Kenneth Klingler , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTP-55010016-2
Name of Grantee:  Hewlett Packard Enterprise
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15C 2412.0  -  2462.0 0.0186  

Output is peak conducted. This device and its antenna(s) must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application umHPUPXibHnsyayvQco8yg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise
8000 Foothills Blvd.
Roseville, CA 95747
United States
  Date of Grant: 04/14/2004

Application Dated: 04/14/2004
 
Attention: Kenneth Klingler , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTP-55010016-2
Name of Grantee:  Hewlett Packard Enterprise
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15C 2412.0  -  2462.0 0.0186  

Output is peak conducted. This device and its antenna(s) must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: