FCC ID RTP-MRLBB1003S
802.11a/b/g/n Access Point
by Hewlett Packard Enterprise
Grantee Code: RTP Product Code: MRLBB1003S
Latest application date: 2011-08-25
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class III permissive change to software defined radio | 2011-08-25 |
| 5180-5240 MHz | Class III permissive change to software defined radio | 2011-03-11 |
| 2412-2462 MHz | Class III permissive change to software defined radio | 2011-03-08 |
| 2412-2462 MHz | Original Equipment | 2010-12-13 |
| 5180-5240 MHz | Original Equipment | 2010-12-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2011-08-25 | PDF 929.8 KB |
| Antenna Specification 2 | Parts List/Tune Up Info | 2010-12-13 | PDF 497.2 KB |
| Antenna Specification 3 | Parts List/Tune Up Info | 2010-12-13 | PDF 850.9 KB |
| Users Manual | Users Manual | 2010-12-13 | PDF 929.8 KB |
| Main Assembly | Internal Photos | 2010-12-13 | PDF 1.7 MB |
| Radio Bottom View | Internal Photos | 2010-12-13 | PDF 529.1 KB |
| Radio Top View | Internal Photos | 2010-12-13 | PDF 368.4 KB |
| External Photographs | External Photos | 2010-12-13 | PDF 2 MB |
| Label Artwork 1 | ID Label/Location Info | 2010-12-13 | PDF 475.9 KB |
| Label Artwork 2 | ID Label/Location Info | 2010-12-13 | PDF 475.8 KB |
| Label Artwork 3 | ID Label/Location Info | 2010-12-13 | PDF 475.5 KB |
| Label Location | ID Label/Location Info | 2010-12-13 | PDF 23.9 KB |
| Authorization Letter | Block Diagram | 2011-03-08 | PDF 41.4 KB |
| Test Setup Photographs | Test Setup Photos | 2011-08-25 | PDF 207.1 KB |
| Test Setup Photographs | Test Setup Photos | 2010-12-13 | PDF 1.3 MB |
| Test Setup Photos 1 | Test Setup Photos | 2010-12-13 | PDF 594.7 KB |
| Test Setup Photos 2 | Test Setup Photos | 2010-12-13 | PDF 1.3 MB |
| Areoflex DFS Testing and Analysis | Test Report | 2011-08-25 | PDF 5 MB |
| DFS15.407 Test Report | Test Report | 2011-08-25 | PDF 5.5 MB |
| RF 15.407 Test Report | Test Report | 2011-08-25 | PDF 3.6 MB |
| 15.407 Test Report | Test Report | 2011-03-11 | PDF 2.3 MB |
| 15.247 Test report 2.4 GHz | Test Report | 2011-03-08 | PDF 4.2 MB |
| 15.247 Test report 5.8 GHz | Test Report | 2011-03-08 | PDF 3 MB |
| 15.407 Test report | Test Report | 2011-03-08 | PDF 2.3 MB |
| 15.247 Test Report | Test Report | 2010-12-13 | PDF 3.2 MB |
| FCC 15.407 Test Report Rev B | Test Report | 2010-12-13 | PDF 4.8 MB |
| Host EMC Test Report | Test Report | 2010-12-13 | PDF 966.5 KB |
| MPE Test Report | Test Report | 2010-12-13 | PDF 1.7 MB |
| Part 15 B Test Report | Test Report | 2010-12-13 | PDF 966.5 KB |
| DFS Uniform Spreading Declaration | Attestation Statements | 2011-08-25 | PDF 20.5 KB |
| FCC Software Configuration Control-signed | Attestation Statements | 2011-08-25 | PDF 20.6 KB |
| FCC UNII Device 5600-5650MHz Band Non-Transmission Restrictions | Attestation Statements | 2011-08-25 | PDF 19 KB |
| Formal Attestation to Info Request | Attestation Statements | 2011-08-25 | PDF 24.6 KB |
| Software Statement | Attestation Statements | 2011-08-25 | PDF 21.3 KB |
| Confidentiality Request | Cover Letter(s) | 2011-08-25 | PDF 28.1 KB |
| Letter of Authorization | Cover Letter(s) | 2011-08-25 | PDF 46 KB |
| Response to FCC Aug 15 2011 | Cover Letter(s) | 2011-08-25 | PDF 26.7 KB |
| Class III Permissive Change Request | Cover Letter(s) | 2011-03-11 | PDF 20.2 KB |
| Confidentiality Request | Cover Letter(s) | 2011-03-11 | PDF 21 KB |
| Letter of Authorization | Cover Letter(s) | 2011-03-11 | PDF 41.4 KB |
| Confidentiality Request | Cover Letter(s) | 2010-12-13 | PDF 19.6 KB |
| Letter of Authorization 1 | Cover Letter(s) | 2010-12-13 | PDF 20.4 KB |
| Letter of Authorization 2 | Cover Letter(s) | 2010-12-13 | PDF 20.4 KB |
| Letter of Authorization 3 | Cover Letter(s) | 2010-12-13 | PDF 171.6 KB |
| RF Exposure Report | RF Exposure Info | 2011-03-11 | PDF 69.7 KB |
| Antenna Specification 1 | Parts List/Tune Up Info | 2010-12-13 | PDF 2.4 MB |
| Antenna Specification 4 | Parts List/Tune Up Info | 2010-12-13 | PDF 254.7 KB |
| Antenna Specification 5 | Parts List/Tune Up Info | 2010-12-13 | PDF 450.5 KB |
| MPE RF Exposure | RF Exposure Info | 2010-12-13 | PDF 38.8 KB |
Application Information
| Application ID | vIqsJBhvJm4r4YZnOlVhNg== |
|---|---|
| Final Action Date | 2011-08-25 |
| Application Purpose | Class III permissive change to software defined radio |
| Applicant FRN | 0005094669 |
| Model | -MRLBB1003S |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11a/b/g/n Access Point |
| Responsible Party | Kenneth Klingler, Senior Regulatory Engineer, ken.klingler@hp.com  , 916-785-3134 |
| Technical Contact | John Czyzewicz, Hewlett-Packard Co, john.czyzewicz@hp.com , 508-467-7065 |
| Test Firm | Gordon Hurst, Micom Labs, gordon_hurst@micomlabs.com  , 925-462-0304 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | Yes |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Software Defined Radio. Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vIqsJBhvJm4r4YZnOlVhNg== | 2011-08-25 | Class III permissive change to software defined radio |
| XCJFSUXfp4yuEJ54xmkZ4w== | 2011-03-11 | Class III permissive change to software defined radio |
| VppO8NuzYBmJ5lN3Qu6mxw== | 2011-03-08 | Class III permissive change to software defined radio |
| JGcUIu3fhCDXCM9Dx4GP7g== | 2010-12-13 | Original Equipment |
| 8wlrwfN5vZiHxBcXWyuWgQ== | 2010-12-13 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 2412-2462 MHz | 0.534 | 20ppm | 17M8D1D | 15C | CC, MO |
| 2412-2462 MHz | 0.732 | 20ppm | 17M8D1D | 15C | CC, MO |
| 2422-2452 MHz | 0.371 | 20ppm | 35M8D1D | 15C | CC, MO |
| 2422-2452 MHz | 0.514 | 20ppm | 36M6D1D | 15C | CC, MO |
| 5180-5240 MHz | 0.025 | 20ppm | 18M3D1D | 15E | CC, MO |
| 5180-5240 MHz | 0.025 | 18M3D1D | 15E | ||
| 5180-5240 MHz | 0.048 | 20ppm | 18M5D1D | 15E | CC, MO |
| 5190-5230 MHz | 0.023 | 20ppm | 36M7D1D | 15E | CC, MO |
| 5190-5230 MHz | 0.048 | 20ppm | 37M5D1D | 15E | CC, MO |
| 5260-5320 MHz | 0.101 | 19M0D1D | 15E | ||
| 5500-5580 MHz | 0.098 | 19M0D1D | 15E | ||
| 5660-5700 MHz | 0.09 | 38M0D1D | 15E | ||
| 5745-5825 MHz | 0.258 | 20ppm | 36M3D1D | 15C | CC, MO |
| 5745-5825 MHz | 0.287 | 20ppm | 36M5D1D | 15C | CC, MO |
Grants
TCB Grant - Application XCJFSUXfp4yuEJ54xmkZ4w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 03/11/2011 Application Dated: 03/08/2011 |
| Hewlett-Packard Co |
| 8000 Foothills Blvd. |
| Roseville, CA 95747 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-MRLBB1003S |
| Name of Grantee: | Hewlett-Packard Co |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.048 | 20.0 PM | 18M5D1D |
| CC MO | 15E | 5190.0 - 5230.0 | 0.048 | 20.0 PM | 37M5D1D |
| Class III Permissive Change to Software Defined Radio to add beamforming capabilities. Software Defined Radio. Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application XCJFSUXfp4yuEJ54xmkZ4w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett-Packard Co 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 03/11/2011 Application Dated: 03/08/2011 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-MRLBB1003S |
| Name of Grantee: | Hewlett-Packard Co |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.048 | 20.0 PM | 18M5D1D |
| CC MO | 15E | 5190.0 - 5230.0 | 0.048 | 20.0 PM | 37M5D1D |
| Class III Permissive Change to Software Defined Radio to add beamforming capabilities. Software Defined Radio. Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 03/08/2011 Application Dated: 02/24/2011 |
| Hewlett-Packard Co |
| 8000 Foothills Blvd. |
| Roseville, CA 95747 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-MRLBB1003S |
| Name of Grantee: | Hewlett-Packard Co |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.732 | 20.0 PM | 17M8D1D |
| CC MO | 15C | 2422.0 - 2452.0 | 0.514 | 20.0 PM | 36M6D1D |
| CC MO | 15C | 5745.0 - 5825.0 | 0.287 | 20.0 PM | 36M5D1D |
| Class III Permissive Change to Software Defined Radio to add beamforming capabilities. Software Defined Radio. Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application VppO8NuzYBmJ5lN3Qu6mxw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett-Packard Co 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 03/08/2011 Application Dated: 02/24/2011 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-MRLBB1003S |
| Name of Grantee: | Hewlett-Packard Co |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.732 | 20.0 PM | 17M8D1D |
| CC MO | 15C | 2422.0 - 2452.0 | 0.514 | 20.0 PM | 36M6D1D |
| CC MO | 15C | 5745.0 - 5825.0 | 0.287 | 20.0 PM | 36M5D1D |
| Class III Permissive Change to Software Defined Radio to add beamforming capabilities. Software Defined Radio. Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 08/25/2011 Application Dated: 05/02/2011 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-MRLBB1003S |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5240.0 | 0.025 | 18M3D1D | ||
| 15E | 5260.0 - 5320.0 | 0.101 | 19M0D1D | ||
| 15E | 5500.0 - 5580.0 | 0.098 | 19M0D1D | ||
| 15E | 5660.0 - 5700.0 | 0.09 | 38M0D1D |
| Software Defined Radio. Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/13/2010 Application Dated: 12/07/2010 |
| Hewlett-Packard Co |
| 8000 Foothills Blvd. |
| Roseville, CA 95747 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-MRLBB1003S |
| Name of Grantee: | Hewlett-Packard Co |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.534 | 20.0 PM | 17M8D1D |
| CC MO | 15C | 2422.0 - 2452.0 | 0.371 | 20.0 PM | 35M8D1D |
| CC MO | 15C | 5745.0 - 5825.0 | 0.258 | 20.0 PM | 36M3D1D |
| Software Defined Radio. Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application JGcUIu3fhCDXCM9Dx4GP7g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett-Packard Co 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 12/13/2010 Application Dated: 12/07/2010 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-MRLBB1003S |
| Name of Grantee: | Hewlett-Packard Co |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.534 | 20.0 PM | 17M8D1D |
| CC MO | 15C | 2422.0 - 2452.0 | 0.371 | 20.0 PM | 35M8D1D |
| CC MO | 15C | 5745.0 - 5825.0 | 0.258 | 20.0 PM | 36M3D1D |
| Software Defined Radio. Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/13/2010 Application Dated: 12/07/2010 |
| Hewlett-Packard Co |
| 8000 Foothills Blvd. |
| Roseville, CA 95747 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-MRLBB1003S |
| Name of Grantee: | Hewlett-Packard Co |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.025 | 20.0 PM | 18M3D1D |
| CC MO | 15E | 5190.0 - 5230.0 | 0.023 | 20.0 PM | 36M7D1D |
| Software Defined Radio. Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 8wlrwfN5vZiHxBcXWyuWgQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett-Packard Co 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 12/13/2010 Application Dated: 12/07/2010 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-MRLBB1003S |
| Name of Grantee: | Hewlett-Packard Co |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.025 | 20.0 PM | 18M3D1D |
| CC MO | 15E | 5190.0 - 5230.0 | 0.023 | 20.0 PM | 36M7D1D |
| Software Defined Radio. Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |