FCC ID RTP55010016-5
WLAN a+b+g+n mini-PCI Module
by Hewlett Packard Enterprise
Grantee Code: RTP Product Code: 550100165
Latest application date: 2009-09-17
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2009-09-17 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2009-09-17 |
| 5150-5350 MHz | Class II permissive change or modification of presently authorized equipment | 2008-07-23 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2007-07-20 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2006-07-07 |
| 5150-5350 MHz | Class II permissive change or modification of presently authorized equipment | 2006-07-07 |
| 5150-5350 MHz | Class II permissive change or modification of presently authorized equipment | 2006-01-31 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2006-01-31 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: NKRCM9 Grant Date: 06/15/2004 | 2005-04-25 |
| 5150-5350 MHz | Change in identification of presently authorized equipment. Original FCC ID: NKRCM9 Grant Date: 06/15/2004 | 2005-04-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual Installation Instructions | Users Manual | 2006-07-07 | PDF 242 KB |
| Installation Instructions | Users Manual | 2006-01-31 | PDF 196.2 KB |
| External Antenna Photographs | External Photos | 2009-09-17 | PDF 217.8 KB |
| External Photographs of Antennas | External Photos | 2009-09-17 | PDF 217.8 KB |
| Antenna Photo 1 | External Photos | 2006-01-31 | PDF 14 KB |
| Antenna Photo 2 | External Photos | 2006-01-31 | PDF 89.4 KB |
| External Photos | External Photos | 2005-04-25 | PDF 776.6 KB |
| Label Location and Sample | ID Label/Location Info | 2005-04-25 | PDF 518.8 KB |
| Test Set Up Photographs | Test Setup Photos | 2009-09-17 | PDF 98.8 KB |
| Test Setup Photos | Test Setup Photos | 2006-07-07 | PDF 299.8 KB |
| Test Setup Photos | Test Setup Photos | 2006-01-31 | PDF 269.2 KB |
| Test Report 15 247 and 15 407 | Test Report | 2009-09-17 | PDF 2.2 MB |
| Test Report | Test Report | 2006-07-07 | PDF 356.4 KB |
| Test Report | Test Report | 2006-01-31 | PDF 539.5 KB |
| Authorization Letter | Cover Letter(s) | 2009-09-17 | PDF 17.1 KB |
| Class II PC Request | Cover Letter(s) | 2009-09-17 | PDF 16.5 KB |
| Class II PC request | Cover Letter(s) | 2009-09-17 | PDF 16.5 KB |
| Confidentiality Request | Cover Letter(s) | 2009-09-17 | PDF 16.8 KB |
| Letter of Authorization | Cover Letter(s) | 2009-09-17 | PDF 17.1 KB |
| Class II Permissive Change Channel Decativation Letter | Cover Letter(s) | 2007-07-20 | PDF 22.7 KB |
| Agency | Cover Letter(s) | 2006-07-07 | PDF 46.9 KB |
| Class II PC | Cover Letter(s) | 2006-07-07 | PDF 108.5 KB |
| Agency Letter | Cover Letter(s) | 2006-01-31 | PDF 110.2 KB |
| Antenna Connector | Cover Letter(s) | 2006-01-31 | PDF 31 KB |
| Antenna Connector | Cover Letter(s) | 2006-01-31 | PDF 31 KB |
| Antenna Specification 1 | Cover Letter(s) | 2006-01-31 | PDF 139.4 KB |
| Antenna Specification 2 | Cover Letter(s) | 2006-01-31 | PDF 625.5 KB |
| Antenna Specification 3 | Cover Letter(s) | 2006-01-31 | PDF 325 KB |
| Antenna Specification 4 | Cover Letter(s) | 2006-01-31 | PDF 29 KB |
| Class II PC Letter | Cover Letter(s) | 2006-01-31 | PDF 26.9 KB |
| Declaration Letter | Cover Letter(s) | 2005-04-25 | PDF 59.6 KB |
| Authorization Letter | Cover Letter(s) | PDF 119.8 KB | |
| Class II Permissive Change Letter | Cover Letter(s) | PDF 20.8 KB | |
| Antenna Spec 1 | Parts List/Tune Up Info | 2009-09-17 | PDF 425.4 KB |
| Antenna Spec 2 | Parts List/Tune Up Info | 2009-09-17 | PDF 383.4 KB |
| Antenna Spec 3 | Parts List/Tune Up Info | 2009-09-17 | PDF 856.9 KB |
| Antenna Spec 4 | Parts List/Tune Up Info | 2009-09-17 | PDF 1.7 MB |
| MPE Calculation | RF Exposure Info | 2006-07-07 | PDF 71.2 KB |
| MPE Calculation | RF Exposure Info | 2006-07-07 | PDF 19.1 KB |
| Parts List NanoBlade Antenna | Parts List/Tune Up Info | 2006-07-07 | PDF 413.6 KB |
| Parts List SL24513P12SMF Antenna | Parts List/Tune Up Info | 2006-07-07 | PDF 124.4 KB |
| MPE Calculation 2 4G | RF Exposure Info | 2006-01-31 | PDF 19.2 KB |
| MPE Calculation 5G | RF Exposure Info | 2006-01-31 | PDF 18.5 KB |
Application Information
| Application ID | dgmRyroV6kG6L5X13r0RRw== |
|---|---|
| Final Action Date | 2009-09-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005094669 |
| Model | 55010016-5 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WLAN a+b+g+n mini-PCI Module |
| Responsible Party | Kenneth Klingler, Senior Regulatory Engineer, ken.klingler@hp.com  , 916-785-3134 |
| Agent | Gordon Gordon Gordon, MiCOM Labs, gordon_hurst@micomlabs.com  , 925-462-0304 |
| Technical Contact | John Czyzewicz, Hewlett-Packard Co, john.czyzewicz@hp.com , 508-467-7065 |
| Test Firm | Gordon Hurst, Micom Labs, gordon_hurst@micomlabs.com , 925-462-0304 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| dgmRyroV6kG6L5X13r0RRw== | 2009-09-17 | Class II permissive change or modification of presently authorized equipment |
| 2AVhPFpGc45CTsXMiwKDlg== | 2009-09-17 | Class II permissive change or modification of presently authorized equipment |
| KxqNO2dSGiLax8bdoOsZEw== | 2008-07-23 | Class II permissive change or modification of presently authorized equipment |
| 8VqdtFheimHIpsQu6+3A6w== | 2007-07-20 | Class II permissive change or modification of presently authorized equipment |
| TvMp/M7F7B76RMifeSzuXg== | 2006-07-07 | Class II permissive change or modification of presently authorized equipment |
| 623UkWK4yYvVxeVhr/0jSw== | 2006-07-07 | Class II permissive change or modification of presently authorized equipment |
| kcDgn9qtg6IwQ32Sm6vviA== | 2006-01-31 | Class II permissive change or modification of presently authorized equipment |
| Ej6gUTANuU+rJ36CCo1U7g== | 2006-01-31 | Class II permissive change or modification of presently authorized equipment |
| jFpU1KrqHA52tXpGy+IOJQ== | 2005-04-25 | Change in identification of presently authorized equipment. Original FCC ID: NKRCM9 Grant Date: 06/15/2004 |
| 4lbTSOziTEJs0ofzKGOgsA== | 2005-04-25 | Change in identification of presently authorized equipment. Original FCC ID: NKRCM9 Grant Date: 06/15/2004 |
Equipment Authorization
Grants
TCB Grant - Application TvMp/M7F7B76RMifeSzuXg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 07/07/2006 Application Dated: 07/07/2006 |
| Hewlett Packard Enterprise |
| 8000 Foothills Blvd. |
| Roseville, CA 95747 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP55010016-5 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN a+b+g mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15C | 2412.0 - 2462.0 | 0.196 |
| Class II PC to add antennas. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installations only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented under the filings of this FCC ID. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application TvMp/M7F7B76RMifeSzuXg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 07/07/2006 Application Dated: 07/07/2006 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP55010016-5 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN a+b+g mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15C | 2412.0 - 2462.0 | 0.196 |
| Class II PC to add antennas. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installations only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented under the filings of this FCC ID. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 01/31/2006 Application Dated: 01/31/2006 |
| Hewlett Packard Enterprise |
| 8000 Foothills Blvd. |
| Roseville, CA 95747 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP55010016-5 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN atbtg mini-PCI module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15E | 5150.0 - 5350.0 | 0.069 | ||
| 36 CC | 15E | 5725.0 - 5825.0 | 0.101 |
| Class II PC to add antennas. Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device in the 5150MHz to 5250MHz range is restricted to indoor use only. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application kcDgn9qtg6IwQ32Sm6vviA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 01/31/2006 Application Dated: 01/31/2006 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP55010016-5 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN atbtg mini-PCI module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15E | 5150.0 - 5350.0 | 0.069 | ||
| 36 CC | 15E | 5725.0 - 5825.0 | 0.101 |
| Class II PC to add antennas. Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device in the 5150MHz to 5250MHz range is restricted to indoor use only. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/25/2005 Application Dated: 04/25/2005 |
| Hewlett Packard Enterprise |
| 8000 Foothills Blvd. |
| Roseville, CA 95747 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP55010016-5 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN a+b+g mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15C | 2412.0 - 2462.0 | 0.196 |
| Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application jFpU1KrqHA52tXpGy+IOJQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 04/25/2005 Application Dated: 04/25/2005 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP55010016-5 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN a+b+g mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15C | 2412.0 - 2462.0 | 0.196 |
| Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 01/31/2006 Application Dated: 01/31/2006 |
| Hewlett Packard Enterprise |
| 8000 Foothills Blvd. |
| Roseville, CA 95747 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP55010016-5 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN atbtg mini-PCI module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15C | 2412.0 - 2462.0 | 0.196 |
| Class II PC to add antennas. Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Ej6gUTANuU+rJ36CCo1U7g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 01/31/2006 Application Dated: 01/31/2006 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP55010016-5 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN atbtg mini-PCI module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15C | 2412.0 - 2462.0 | 0.196 |
| Class II PC to add antennas. Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 09/17/2009 Application Dated: 08/03/2009 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP55010016-5 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN a+b+g+n mini-PCI Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15C | 2412.0 - 2462.0 | 0.196 |
| Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 | Date of Grant: 07/20/2007 Application Dated: 07/20/2007 |
| Hewlett-Packard Co |
| 8000 Foothills Blvd. |
| Roseville, CA 95747 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP55010016-5 |
| Name of Grantee: | Hewlett-Packard Co |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN a+b+g mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15E | 5725.0 - 5825.0 | 0.101 | ||
| 36 CC | 15E | 5180.0 - 5240.0 | 0.069 |
| Class II Permissive Change for firmware deactivation of operation in the UNII band (5260-5320). This is a firmware modification performed at the point of manufacture not accessible/reprogrammable by the end user. No modification has been made to the device hardware. Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 8VqdtFheimHIpsQu6+3A6w==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Hewlett-Packard Co 8000 Foothills Blvd. Roseville, CA 95747 United States | Date of Grant: 07/20/2007 Application Dated: 07/20/2007 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP55010016-5 |
| Name of Grantee: | Hewlett-Packard Co |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN a+b+g mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15E | 5725.0 - 5825.0 | 0.101 | ||
| 36 CC | 15E | 5180.0 - 5240.0 | 0.069 |
| Class II Permissive Change for firmware deactivation of operation in the UNII band (5260-5320). This is a firmware modification performed at the point of manufacture not accessible/reprogrammable by the end user. No modification has been made to the device hardware. Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
| EA629652 |
TCB Grant - Application 623UkWK4yYvVxeVhr/0jSw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 07/07/2006 Application Dated: 07/07/2006 |
| Hewlett Packard Enterprise |
| 8000 Foothills Blvd. |
| Roseville, CA 95747 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP55010016-5 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN a+b+g mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15E | 5150.0 - 5350.0 | 0.069 | ||
| 36 CC | 15E | 5725.0 - 5825.0 | 0.101 |
| Class II PC to add antennas. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installations only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented under the filings of this FCC ID. Operation of this device in the 5150MHz to 5250MHz range is restricted to indoor use only. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 623UkWK4yYvVxeVhr/0jSw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 07/07/2006 Application Dated: 07/07/2006 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP55010016-5 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN a+b+g mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15E | 5150.0 - 5350.0 | 0.069 | ||
| 36 CC | 15E | 5725.0 - 5825.0 | 0.101 |
| Class II PC to add antennas. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installations only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented under the filings of this FCC ID. Operation of this device in the 5150MHz to 5250MHz range is restricted to indoor use only. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/25/2005 Application Dated: 04/25/2005 |
| Hewlett Packard Enterprise |
| 8000 Foothills Blvd. |
| Roseville, CA 95747 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP55010016-5 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN a+b+g mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15E | 5150.0 - 5350.0 | 0.069 | ||
| 36 CC | 15E | 5725.0 - 5825.0 | 0.101 |
| Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device the 5150MHz to 5250MHz range is restricted to indoor use only. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 4lbTSOziTEJs0ofzKGOgsA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 04/25/2005 Application Dated: 04/25/2005 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP55010016-5 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN a+b+g mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15E | 5150.0 - 5350.0 | 0.069 | ||
| 36 CC | 15E | 5725.0 - 5825.0 | 0.101 |
| Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device the 5150MHz to 5250MHz range is restricted to indoor use only. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 09/17/2009 Application Dated: 08/03/2009 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP55010016-5 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN a+b+g+n mini-PCI Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15E | 5180.0 - 5240.0 | 0.069 | ||
| 36 CC | 15E | 5745.0 - 5825.0 | 0.101 |
| Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device the 5150MHz to 5250MHz range is restricted to indoor use only.
|
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |