FCC ID RTP-DNMA83
WLAN a+b+g+n mini-PCI Module
by Hewlett Packard Enterprise
Grantee Code: RTP Product Code: DNMA83
Latest application date: 2010-03-04
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2010-03-04 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2009-08-27 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2009-08-27 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2009-06-09 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2009-06-09 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2009-02-11 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: NKR-DNMA83 Grant Date: 03/02/2008 | 2008-08-29 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: NKR-DNMA83 Grant Date: 03/02/2008 | 2008-08-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Quick Start Guide | Users Manual | 2010-03-04 | PDF 393 KB |
| Antenna Spec 2 | Parts List/Tune Up Info | 2009-08-27 | PDF 850.7 KB |
| Antenna spec 1 | Parts List/Tune Up Info | 2009-08-27 | PDF 497.1 KB |
| Antenna specs 1 | Parts List/Tune Up Info | 2009-08-27 | PDF 497.1 KB |
| Antenna specs 2 | Parts List/Tune Up Info | 2009-08-27 | PDF 850.7 KB |
| Antenna SM24513P | Internal Photos | 2010-03-04 | PDF 77.6 KB |
| External Antenna Photographs | External Photos | 2009-08-27 | PDF 220.6 KB |
| Antenna SM24513P | External Photos | 2009-06-09 | PDF 77.5 KB |
| External Photos | External Photos | 2009-02-11 | PDF 392.6 KB |
| External Photos | External Photos | 2008-08-29 | PDF 115.7 KB |
| Label Artwork and Location | ID Label/Location Info | 2009-02-11 | PDF 54 KB |
| ID Label and Location | ID Label/Location Info | 2008-08-29 | PDF 92.9 KB |
| Test Set Up Photographs | Test Setup Photos | 2010-03-04 | PDF 208.2 KB |
| Test Set Up Photographs | Test Setup Photos | 2009-08-27 | PDF 206.7 KB |
| Test Set Up Photographs | Test Setup Photos | 2009-06-09 | PDF 208.1 KB |
| Test Setup Photos | Test Setup Photos | 2009-02-11 | PDF 197.6 KB |
| Test Report 15.407 DFS Bands Only | Test Report | 2010-03-04 | PDF 1.9 MB |
| Test Report 15 247 | Test Report | 2009-08-27 | PDF 2.8 MB |
| Test Report 15 407 | Test Report | 2009-08-27 | PDF 1.8 MB |
| Test Report | Test Report | 2009-06-09 | PDF 2.4 MB |
| Test Report | Test Report | 2009-06-09 | PDF 3.1 MB |
| Test Report 15 407 MiCOM Labs | Test Report | 2009-02-11 | PDF 5.3 MB |
| Test Report FD7D1412 | Test Report | 2009-02-11 | PDF 3.4 MB |
| Class II PC Request Letter | Cover Letter(s) | 2010-03-04 | PDF 39.3 KB |
| Confidentiality Form | Cover Letter(s) | 2010-03-04 | PDF 29.2 KB |
| Country Code Settings Explanation | Cover Letter(s) | 2010-03-04 | PDF 444.6 KB |
| Letter of Authorization | Cover Letter(s) | 2010-03-04 | PDF 40.5 KB |
| Class II PC request | Cover Letter(s) | 2009-08-27 | PDF 16.4 KB |
| Confidentiality Form | Cover Letter(s) | 2009-08-27 | PDF 16.9 KB |
| Confidentiality Request | Cover Letter(s) | 2009-08-27 | PDF 16.9 KB |
| Letter of Authorization | Cover Letter(s) | 2009-08-27 | PDF 17.1 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2009-06-09 | PDF 46 KB |
| Class II permissive change letter | Cover Letter(s) | 2009-06-09 | PDF 46 KB |
| Confidentiality Cover Letter | Cover Letter(s) | 2009-06-09 | PDF 13.2 KB |
| Confidentiality Cover Letter | Cover Letter(s) | 2009-06-09 | PDF 13.2 KB |
| Confidentiality Request | Cover Letter(s) | 2009-06-09 | PDF 43.2 KB |
| Letter of Authorization | Cover Letter(s) | 2009-06-09 | PDF 50.7 KB |
| CIIPC Request Letter | Cover Letter(s) | 2009-02-11 | PDF 106.9 KB |
| Letter of Authorization | Cover Letter(s) | 2009-02-11 | PDF 107.5 KB |
| Authorization Letter | Cover Letter(s) | 2008-08-29 | PDF 114 KB |
| Authorization Letter from Original Grantee | Cover Letter(s) | 2008-08-29 | PDF 63.4 KB |
| Change in ID Request Letter | Cover Letter(s) | 2008-08-29 | PDF 107.4 KB |
| Change of ID request letter | Cover Letter(s) | 2008-08-29 | PDF 107.4 KB |
| Antenna Specs 3 | Parts List/Tune Up Info | 2009-08-27 | PDF 254.6 KB |
| Antenna spec 3 | Parts List/Tune Up Info | 2009-08-27 | PDF 254.6 KB |
| Antenna Specs | Parts List/Tune Up Info | 2009-06-09 | PDF 303.9 KB |
| MPE 15 407 | RF Exposure Info | 2009-02-11 | PDF 31.1 KB |
Application Information
| Application ID | t5DX4Q7ibnTieIRmcTfoSQ== |
|---|---|
| Final Action Date | 2010-03-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005094669 |
| Model | -DNMA83 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | WLAN a+b+g+n mini-PCI Module |
| Responsible Party | Kenneth Klingler, Senior Regulatory Engineer, ken.klingler@hp.com  , 916-785-3134 |
| Agent | Gordon Gordon Gordon, MiCOM Labs Inc., gordon_hurst@micomlabs.com  , 925-462-0304 |
| Technical Contact | John Czyzewicz, Hewlett-Packard Co, john.czyzewicz@hp.com , 508-467-7065 |
| Test Firm | Gordon Hurst, Micom Labs, gordon_hurst@micomlabs.com , 925-462-0304 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval. Approval is limited to OEM installation only. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| t5DX4Q7ibnTieIRmcTfoSQ== | 2010-03-04 | Class II permissive change or modification of presently authorized equipment |
| n9O32JJocASNmgt7/ZW76Q== | 2009-08-27 | Class II permissive change or modification of presently authorized equipment |
| PhmuX2lrt44u1aS4Uh62uA== | 2009-08-27 | Class II permissive change or modification of presently authorized equipment |
| vbUOu9eSrfQqSbkD+ymCaQ== | 2009-06-09 | Class II permissive change or modification of presently authorized equipment |
| ZrVS5LK+9cjJ+HdQgFeN9A== | 2009-06-09 | Class II permissive change or modification of presently authorized equipment |
| ZCD3acTDiKv2GElSb0D4ZQ== | 2009-02-11 | Class II permissive change or modification of presently authorized equipment |
| dgZT55pFypXlqA2uTggHBQ== | 2008-08-29 | Change in identification of presently authorized equipment. Original FCC ID: NKR-DNMA83 Grant Date: 03/02/2008 |
| Mx0K97GsqjPm8fX8OrwI/w== | 2008-08-29 | Change in identification of presently authorized equipment. Original FCC ID: NKR-DNMA83 Grant Date: 03/02/2008 |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 2412-2462 MHz | 0.2615 | 15C | MO | ||
| 2412-2462 MHz | 0.2615 | 20ppm | 15C | ||
| 2412-2462 MHz | 0.2615 | 15C | |||
| 5180-5240 MHz | 0.0476000 | 15E | MO | ||
| 5180-5240 MHz | 0.0476000 | 20.0000000000ppm | 15E | ||
| 5180-5240 MHz | 0.0476 | 15E | |||
| 5180-5240 MHz | 0.0476000 | 20.0000000000ppm | 17M0D1D | 15E | |
| 5260-5320 MHz | 0.0759 | 15E | |||
| 5500-5580 MHz | 0.0851 | 15E | |||
| 5500-5700 MHz | 0.0851 | 15E | |||
| 5660-5700 MHz | 0.0851 | 15E | |||
| 5745-5825 MHz | 0.6029 | 15C | MO | ||
| 5745-5825 MHz | 0.6029 | 20ppm | 15C | ||
| 5745-5825 MHz | 0.6029 | 15C |
Grants
TCB Grant - Application ZrVS5LK+9cjJ+HdQgFeN9A==
This application does not exist.
EAS Grant - Application ZrVS5LK+9cjJ+HdQgFeN9A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 06/09/2009 Application Dated: 03/25/2009 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-DNMA83 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN a+b+g+n mini-PCI Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5240.0 | 0.0476 | 20.0 PM | 17M0D1D |
| Limited Modular Approval. Approval is limited to OEM installation only. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
|
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 02/11/2009 Application Dated: 10/09/2008 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-DNMA83 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN a+b+g+n mini-PCI Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5240.0 | 0.0476 | |||
| 15E | 5260.0 - 5320.0 | 0.0759 | |||
| 15E | 5500.0 - 5700.0 | 0.0851 |
| Limited Modular Approval. Approval is limited to OEM installation only. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
|
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 06/09/2009 Application Dated: 03/25/2009 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-DNMA83 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN a+b+g+n mini-PCI Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2615 | |||
| 15C | 5745.0 - 5825.0 | 0.6029 |
| Limited Modular Approval. Approval is limited to OEM installation only. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
|
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 03/04/2010 Application Dated: 12/08/2009 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-DNMA83 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN a+b+g+n mini-PCI Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5240.0 | 0.0476 | |||
| 15E | 5260.0 - 5320.0 | 0.0759 | |||
| 15E | 5500.0 - 5580.0 | 0.0851 | |||
| 15E | 5660.0 - 5700.0 | 0.0851 |
| Limited Modular Approval. Approval is limited to OEM installation only. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 08/27/2009 Application Dated: 07/30/2009 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-DNMA83 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN a+b+g+n mini-PCI Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5240.0 | 0.0476 | 20.0 PM |
| Limited Modular Approval. Approval is limited to OEM installation only. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 08/27/2009 Application Dated: 07/30/2009 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-DNMA83 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN a+b+g+n mini-PCI Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2615 | 20.0 PM | ||
| 15C | 5745.0 - 5825.0 | 0.6029 | 20.0 PM |
| Limited Modular Approval. Approval is limited to OEM installation only. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 08/29/2008 Application Dated: 08/29/2008 |
| Hewlett-Packard Co |
| 8000 Foothills Blvd. |
| Roseville, CA 95747 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-DNMA83 |
| Name of Grantee: | Hewlett-Packard Co |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN a+b+g+n mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2412.0 - 2462.0 | 0.2615 | ||
| MO | 15C | 5745.0 - 5825.0 | 0.6029 |
| Limited Modular Approval. Approval is limited to OEM installation only. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Single Modular |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Mx0K97GsqjPm8fX8OrwI/w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett-Packard Co 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 08/29/2008 Application Dated: 08/29/2008 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-DNMA83 |
| Name of Grantee: | Hewlett-Packard Co |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN a+b+g+n mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2412.0 - 2462.0 | 0.2615 | ||
| MO | 15C | 5745.0 - 5825.0 | 0.6029 |
| Limited Modular Approval. Approval is limited to OEM installation only. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Single Modular |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 08/29/2008 Application Dated: 08/29/2008 |
| Hewlett-Packard Co |
| 8000 Foothills Blvd. |
| Roseville, CA 95747 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-DNMA83 |
| Name of Grantee: | Hewlett-Packard Co |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN a+b+g+n mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15E | 5180.0 - 5240.0 | 0.0476 |
| Limited Modular Approval. Approval is limited to OEM installation only. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Single Modular |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application dgZT55pFypXlqA2uTggHBQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett-Packard Co 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 08/29/2008 Application Dated: 08/29/2008 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTP-DNMA83 |
| Name of Grantee: | Hewlett-Packard Co |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN a+b+g+n mini-PCI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15E | 5180.0 - 5240.0 | 0.0476 |
| Limited Modular Approval. Approval is limited to OEM installation only. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Single Modular |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |