FCC ID RTPRSVLC1103
HP M220 802.11n AM Access Point / HP M220 802.11n WW Access Point
by Hewlett Packard Enterprise
Grantee Code: RTP Product Code: RSVLC1103
Latest application date: 2015-06-01
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: B94RSVLC1103 Grant Date: 08/27/2012 | 2015-06-01 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: B94RSVLC1103 Grant Date: 08/27/2012 | 2015-06-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Ext | External Photos | 2015-06-01 | PDF 60.7 KB |
| Label | ID Label/Location Info | 2015-06-01 | PDF 73.3 KB |
| Authorization | Cover Letter(s) | 2015-06-01 | PDF 28.4 KB |
| Cover | Cover Letter(s) | 2015-06-01 | PDF 27.3 KB |
Application Information
| Application ID | rb/q2V3rxJVQ/6YuUVPeQQ== |
|---|---|
| Final Action Date | 2015-06-01 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: B94RSVLC1103 Grant Date: 08/27/2012 |
| Applicant FRN | 0010292464 |
| Model | RSVLC1103 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | HP M220 802.11n AM Access Point / HP M220 802.11n WW Access Point |
| Responsible Party | Kenneth Klingler, Senior Regulatory Engineer, ken.klingler@hpe.com  , 916-785-3134 |
| Technical Contact | Gordon Hurst, MiCOM Labs, certification@micomlabs.com  , (925)4620304 |
| Test Firm | Gordon Hurst, Micom Labs, gordon_hurst@micomlabs.com , 925-462-0304 |
| TCB Email | certification@micomlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device has 20 MHz and 40 MHz bandwidth mode. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rb/q2V3rxJVQ/6YuUVPeQQ== | 2015-06-01 | Change in identification of presently authorized equipment. Original FCC ID: B94RSVLC1103 Grant Date: 08/27/2012 |
| CfKrdstohJRSLBVb0wS/Bw== | 2015-06-01 | Change in identification of presently authorized equipment. Original FCC ID: B94RSVLC1103 Grant Date: 08/27/2012 |
Equipment Authorization
Grants
TCB Grant - Application rb/q2V3rxJVQ/6YuUVPeQQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 06/01/2015 Application Dated: 06/01/2015 |
| Hewlett Packard Enterprise |
| 8000 Foothills Blvd. |
| Roseville, CA 95747 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTPRSVLC1103 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | HP M220 802.11n AM Access Point / HP M220 802.11n WW Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC MO | 15E | 5180.0 - 5240.0 | 0.03 |
| Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device has 20 MHz and 40 MHz bandwidth mode. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application rb/q2V3rxJVQ/6YuUVPeQQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 06/01/2015 Application Dated: 06/01/2015 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTPRSVLC1103 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | HP M220 802.11n AM Access Point / HP M220 802.11n WW Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC MO | 15E | 5180.0 - 5240.0 | 0.03 |
| Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device has 20 MHz and 40 MHz bandwidth mode. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 06/01/2015 Application Dated: 06/01/2015 |
| Hewlett Packard Enterprise |
| 8000 Foothills Blvd. |
| Roseville, CA 95747 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTPRSVLC1103 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | HP M210 802.11n AM Access Point / HP M210 802.11n WW Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC MO | 15C | 2412.0 - 2462.0 | 0.512 | ||
| 20 CC MO | 15C | 5745.0 - 5825.0 | 0.314 |
| Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device has 20 MHz and 40 MHz bandwidth mode. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application CfKrdstohJRSLBVb0wS/Bw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 8000 Foothills Blvd. Roseville, CA 95747 United States |
Date of Grant: 06/01/2015 Application Dated: 06/01/2015 |
| Attention: Kenneth Klingler , Senior Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTPRSVLC1103 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | HP M210 802.11n AM Access Point / HP M210 802.11n WW Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC MO | 15C | 2412.0 - 2462.0 | 0.512 | ||
| 20 CC MO | 15C | 5745.0 - 5825.0 | 0.314 |
| Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device has 20 MHz and 40 MHz bandwidth mode. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |