FCC ID RTQLPT100SB

Tablet

by LG CNS CO., LTD.

Grantee Code: RTQ   Product Code: LPT100SB
Latest application date: 2013-12-27

FCC ID Device Details

FCC IDRTQLPT100SB
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRTQ
Product CodeLPT100SB
Applicant BusinessLG CNS CO., LTD. 🇰🇷
Related Domains lgcns.com
Equipment ClassTablet
Test FirmCTK Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2013-12-27
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2013-12-27
2412-2462 MHzOriginal Equipment2013-11-26
5180-5240 MHzOriginal Equipment2013-11-26

Exhibits

DocumentTypeAvailableFile
USERS MANUALUsers Manual2013-12-27PDF 1,017.2 KB
USERS MANUALUsers Manual2013-11-26PDF 1.2 MB
COMPONENT LAYOUTInternal Photos2013-12-27PDF 443.5 KB
INTERNAL PHOTOSInternal Photos2013-12-27PDF 1.1 MB
COMPONENT LAYOUTInternal Photos2013-11-26PDF 436.4 KB
INTERNAL PHOTOSInternal Photos2013-11-26PDF 2.8 MB
EXTERNAL PHOTOSExternal Photos2013-12-27PDF 272.9 KB
EXTERNAL PHOTOSExternal Photos2013-11-26PDF 377.2 KB
LABEL INFOID Label/Location Info2013-12-27PDF 143.2 KB
LABEL PHOTOID Label/Location Info2013-11-26PDF 119.5 KB
TEST SETUP PHOTOSTest Setup Photos2013-12-27PDF 276.2 KB
TEST SETUP PHOTOSTest Setup Photos2013-11-26PDF 1.7 MB
EMC TEST REPORTTest Report2013-12-27PDF 3.1 MB
TEST REPORTTest Report2013-12-27PDF 1.4 MB
TEST REPORTTest Report2013-12-27PDF 1.3 MB
DFS REPORTTest Report2013-11-26PDF 1.5 MB
RF MODULE REPORT 1Test Report2013-11-26PDF 3.1 MB
RF MODULE REPORT 1Test Report2013-11-26PDF 2.3 MB
RF MODULE REPORT 2Test Report2013-11-26PDF 2.8 MB
RF MODULE REPORT 2Test Report2013-11-26PDF 2.5 MB
TEST REPORTTest Report2013-11-26PDF 1.3 MB
TEST REPORTTest Report2013-11-26PDF 1.4 MB
C2PC LETTERCover Letter(s)2013-12-27PDF 1.4 MB
CONFIDENTIAL LETTERCover Letter(s)2013-12-27PDF 158.3 KB
FCC VERIFICATIONCover Letter(s)2013-12-27PDF 84.9 KB
CONFIDENTIAL LETTERCover Letter(s)2013-11-26PDF 32.7 KB
DOCCover Letter(s)2013-11-26PDF 64.9 KB
DOC REPORTCover Letter(s)2013-11-26PDF 2.7 MB
RF EXPOSURERF Exposure Info2013-11-26PDF 147.5 KB
RF EXPOSURERF Exposure Info2013-11-26PDF 144.9 KB

Application Information

Application IDIZabVpIq7eTyyxebON6cUA==
Final Action Date2013-12-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0023045305
ModelLPT100SB
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionTablet
Responsible PartyTAE YOUNG JEONG, Manager, teijeong@lgcns.com , +82-2-6363-5797
Test FirmHong Jang Hee, CTK Co., Ltd., jh8802@e-ctk.com , 82-31-339-9970
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. Operations in the band 5.15-5.25GHz are restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.(Date of Grant: 11/26/2013) Class II Permissive Change: This Class II Permissive Change is for a changed PCB layout.

Applications

Application IDDatePurpose
IZabVpIq7eTyyxebON6cUA==2013-12-27Class II permissive change or modification of presently authorized equipment
C1XFmMyPm3NFv19jNVtfkA==2013-12-27Class II permissive change or modification of presently authorized equipment
BjaQ82KVY01+il20DoDfsg==2013-11-26Original Equipment
7vKmEFyKhhsh1L4r5bBqfg==2013-11-26Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.1115CCC
2422-2452 MHz0.0815CCC
5180-5240 MHz0.01515ECC, MO
5180-5240 MHz0.01515ECC, MO, ND
5190-5230 MHz0.01415ECC, MO
5190-5230 MHz0.01415ECC, MO, ND
5260-5320 MHz0.01515ECC, MO, ND
5270-5310 MHz0.01415ECC, MO, ND
5500-5580 MHz0.01515ECC, MO, ND
5510-5550 MHz0.01415ECC, MO, ND
5660-5700 MHz0.01415ECC, MO, ND
5670 MHz0.01515ECC, MO, ND
5745-5825 MHz0.01515CCC
5755-5795 MHz0.01515CCC

Grants

TCB Grant - Application IZabVpIq7eTyyxebON6cUA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 12/27/2013

Application Dated: 12/27/2013
LG CNS CO., LTD.
21F, FKI Tower, 24, Yeoui-daero, Yeongdeungpo-gu
Seoul,
South Korea
 
Attention: TAE YOUNG JEONG , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTQLPT100SB
Name of Grantee:  LG CNS CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Tablet
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.015  
CC MO ND 15E 5190.0  -  5230.0 0.014  
CC MO ND 15E 5260.0  -  5320.0 0.015  
CC MO ND 15E 5270.0  -  5310.0 0.014  
CC MO ND 15E 5500.0  -  5580.0 0.015  
CC MO ND 15E 5660.0  -  5700.0 0.014  
CC MO ND 15E 5510.0  -  5550.0 0.014  
CC MO ND 15E 5670.0  -  5670.0 0.015  

Power listed is conducted. Operations in the band 5.15-5.25GHz are restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.(Date of Grant: 11/26/2013) Class II Permissive Change: This Class II Permissive Change is for a changed PCB layout.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application IZabVpIq7eTyyxebON6cUA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG CNS CO., LTD.
21F, FKI Tower, 24, Yeoui-daero, Yeongdeungpo-gu
Seoul,
South Korea
  Date of Grant: 12/27/2013

Application Dated: 12/27/2013
 
Attention: TAE YOUNG JEONG , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTQLPT100SB
Name of Grantee:  LG CNS CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Tablet
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.015  
CC MO ND 15E 5190.0  -  5230.0 0.014  
CC MO ND 15E 5260.0  -  5320.0 0.015  
CC MO ND 15E 5270.0  -  5310.0 0.014  
CC MO ND 15E 5500.0  -  5580.0 0.015  
CC MO ND 15E 5660.0  -  5700.0 0.014  
CC MO ND 15E 5510.0  -  5550.0 0.014  
CC MO ND 15E 5670.0  -  5670.0 0.015  

Power listed is conducted. Operations in the band 5.15-5.25GHz are restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.(Date of Grant: 11/26/2013) Class II Permissive Change: This Class II Permissive Change is for a changed PCB layout.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application C1XFmMyPm3NFv19jNVtfkA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 12/27/2013

Application Dated: 12/27/2013
LG CNS CO., LTD.
21F, FKI Tower, 24, Yeoui-daero, Yeongdeungpo-gu
Seoul,
South Korea
 
Attention: TAE YOUNG JEONG , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTQLPT100SB
Name of Grantee:  LG CNS CO., LTD.
Equipment Class: Digital Transmission System
Notes: Tablet
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.11  
CC 15C 2422.0  -  2452.0 0.08  
CC 15C 5745.0  -  5825.0 0.015  
CC 15C 5755.0  -  5795.0 0.015  

Power listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. This device has a 20 MHz and 40 MHz bandwidth mode. (Date of Grant: 11/26/2013) Class II Permissive Change: This Class II Permissive Change is for a changed PCB layout.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application C1XFmMyPm3NFv19jNVtfkA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG CNS CO., LTD.
21F, FKI Tower, 24, Yeoui-daero, Yeongdeungpo-gu
Seoul,
South Korea
  Date of Grant: 12/27/2013

Application Dated: 12/27/2013
 
Attention: TAE YOUNG JEONG , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTQLPT100SB
Name of Grantee:  LG CNS CO., LTD.
Equipment Class: Digital Transmission System
Notes: Tablet
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.11  
CC 15C 2422.0  -  2452.0 0.08  
CC 15C 5745.0  -  5825.0 0.015  
CC 15C 5755.0  -  5795.0 0.015  

Power listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. This device has a 20 MHz and 40 MHz bandwidth mode. (Date of Grant: 11/26/2013) Class II Permissive Change: This Class II Permissive Change is for a changed PCB layout.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application BjaQ82KVY01+il20DoDfsg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 11/26/2013

Application Dated: 11/26/2013
LG CNS CO., LTD.
21F, FKI Tower, 24, Yeoui-daero, Yeongdeungpo-gu
Seoul,
South Korea
 
Attention: TAE YOUNG JEONG , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTQLPT100SB
Name of Grantee:  LG CNS CO., LTD.
Equipment Class: Digital Transmission System
Notes: TABLET
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.11  
CC 15C 2422.0  -  2452.0 0.08  
CC 15C 5745.0  -  5825.0 0.015  
CC 15C 5755.0  -  5795.0 0.015  

Power listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. This device has a 20 MHz and 40 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application BjaQ82KVY01+il20DoDfsg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG CNS CO., LTD.
21F, FKI Tower, 24, Yeoui-daero, Yeongdeungpo-gu
Seoul,
South Korea
  Date of Grant: 11/26/2013

Application Dated: 11/26/2013
 
Attention: TAE YOUNG JEONG , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTQLPT100SB
Name of Grantee:  LG CNS CO., LTD.
Equipment Class: Digital Transmission System
Notes: TABLET
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.11  
CC 15C 2422.0  -  2452.0 0.08  
CC 15C 5745.0  -  5825.0 0.015  
CC 15C 5755.0  -  5795.0 0.015  

Power listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. This device has a 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 7vKmEFyKhhsh1L4r5bBqfg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 11/26/2013

Application Dated: 11/26/2013
LG CNS CO., LTD.
21F, FKI Tower, 24, Yeoui-daero, Yeongdeungpo-gu
Seoul,
South Korea
 
Attention: TAE YOUNG JEONG , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTQLPT100SB
Name of Grantee:  LG CNS CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: TABLET
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.015  
CC MO 15E 5190.0  -  5230.0 0.014  
CC MO ND 15E 5260.0  -  5320.0 0.015  
CC MO ND 15E 5270.0  -  5310.0 0.014  
CC MO ND 15E 5500.0  -  5580.0 0.015  
CC MO ND 15E 5660.0  -  5700.0 0.014  
CC MO ND 15E 5510.0  -  5550.0 0.014  
CC MO ND 15E 5670.0  -  5670.0 0.015  

Power listed is conducted. Operations in the band 5.15-5.25GHz are restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 7vKmEFyKhhsh1L4r5bBqfg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG CNS CO., LTD.
21F, FKI Tower, 24, Yeoui-daero, Yeongdeungpo-gu
Seoul,
South Korea
  Date of Grant: 11/26/2013

Application Dated: 11/26/2013
 
Attention: TAE YOUNG JEONG , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RTQLPT100SB
Name of Grantee:  LG CNS CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: TABLET
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.015  
CC MO 15E 5190.0  -  5230.0 0.014  
CC MO ND 15E 5260.0  -  5320.0 0.015  
CC MO ND 15E 5270.0  -  5310.0 0.014  
CC MO ND 15E 5500.0  -  5580.0 0.015  
CC MO ND 15E 5660.0  -  5700.0 0.014  
CC MO ND 15E 5510.0  -  5550.0 0.014  
CC MO ND 15E 5670.0  -  5670.0 0.015  

Power listed is conducted. Operations in the band 5.15-5.25GHz are restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: