FCC ID RTTAB-WLNB
Airborne WLN-B Module
by DPAC Technologies
Grantee Code: RTT Product Code: ABWLNB
Latest application date: 2008-01-07
FCC ID Device Details
| FCC ID | RTTAB-WLNB |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RTT |
| Product Code | ABWLNB |
| Applicant Business | DPAC Technologies 🇺🇸 |
| Related Domains |  dpactech.com |
| Equipment Class | Airborne WLN-B Module |
| Test Firm | Radiometrics Midwest Corp. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2008-01-07 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2007-11-26 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2006-01-17 |
| 2412-2462 MHz | Original Equipment | 2005-07-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2005-07-13 | PDF 3.2 MB |
| Internal Photos | Internal Photos | 2005-07-13 | PDF 337.4 KB |
| External Photos | External Photos | 2008-01-07 | PDF 212 KB |
| EXTERNAL PHOTOS | External Photos | 2006-01-17 | PDF 543.6 KB |
| External Photos | External Photos | 2005-07-13 | PDF 964.9 KB |
| FCC ID Label | ID Label/Location Info | 2008-01-07 | PDF 42.7 KB |
| FCC Label and Location | ID Label/Location Info | 2005-07-13 | PDF 463.8 KB |
| Test Setup Photos | Test Setup Photos | 2008-01-07 | PDF 336.8 KB |
| TEST SET UP PHOTOS | Test Setup Photos | 2006-01-17 | PDF 512.9 KB |
| Test Setup Photos | Test Setup Photos | 2005-07-13 | PDF 917.2 KB |
| Test Report | Test Report | 2008-01-07 | PDF 103.7 KB |
| TEST REPORT | Test Report | 2006-01-17 | PDF 72.2 KB |
| Test Report Body | Test Report | 2005-07-13 | PDF 1.3 MB |
| Test Report Data | Test Report | 2005-07-13 | PDF 2.2 MB |
| Anti Drug Abuse and Authorization Letter | Attestation Statements | 2005-07-13 | PDF 420.4 KB |
| Modular Approval Justificatons | Attestation Statements | 2005-07-13 | PDF 23.4 KB |
| Class II Permissive Change Request | Cover Letter(s) | 2008-01-07 | PDF 38.1 KB |
| COVER LETTER | Cover Letter(s) | 2007-11-26 | PDF 18.2 KB |
| COVER LETTER | Cover Letter(s) | 2006-01-17 | PDF 16.8 KB |
| Confidentiality Letter | Cover Letter(s) | 2005-07-13 | PDF 367.9 KB |
| FCC Interpretation on Antenna Types | Cover Letter(s) | 2005-07-13 | PDF 16.3 KB |
| RF EXPOSURE | RF Exposure Info | 2007-11-26 | PDF 38.9 KB |
| RF EXPOSURE | RF Exposure Info | 2006-01-17 | PDF 29.7 KB |
| Antenna List | Parts List/Tune Up Info | 2005-07-13 | PDF 4.8 KB |
| RF Exposure Info | RF Exposure Info | 2005-07-13 | PDF 85.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 41.4 KB | |
| Schematics 1 Metadata only | Schematics | PDF 138.1 KB | |
| Schematics 2 Metadata only | Schematics | PDF 164.8 KB | |
| Operational Description Metadata only | Operational Description | PDF 665 KB |
Application Information
| Application ID | 3DgPhzjzwkcDrtJjeyI1dQ== |
|---|---|
| Final Action Date | 2008-01-07 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010300770 |
| Model | AB-WLNB |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Airborne WLN-B Module |
| Responsible Party | Paul Shklanko, Engineer, paul.shklanko@dpactech.com , (714) 898-0007 |
| Test Firm | Joseph Strzelecki, Radiometrics Midwest Corp., joe@radiomet.com  , 8152930772 |
| TCB Email | bacl.regulatory@baclcorp.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power output is conducted. This device may only be used with the antennas listed within the certification application at the time of the original filing. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. This Class II Change adds one antenna as described in this filing. This device may only be used with the antennas listed in the original filing and this listed in this Class II Change submission. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 3DgPhzjzwkcDrtJjeyI1dQ== | 2008-01-07 | Class II permissive change or modification of presently authorized equipment |
| S5+cq9Qdj6+v1gkjGQF3sw== | 2007-11-26 | Class II permissive change or modification of presently authorized equipment |
| uPzZ7b2sikZyZ1CNzFNkeg== | 2006-01-17 | Class II permissive change or modification of presently authorized equipment |
| zQ5nKcT2IVzBT9SHKtT5zQ== | 2005-07-13 | Original Equipment |
Grants
TCB Grant - Application zQ5nKcT2IVzBT9SHKtT5zQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Compatible Electronics, Inc. 114 Olinda Drive Brea, CA 92823 |
Date of Grant: 07/13/2005 Application Dated: 07/13/2005 |
| DPAC Technologies |
| 7321 Lincoln Way |
| Garden Grove, CA 92841 |
| Attention: Paul Shklanko , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTTAB-WLNB |
| Name of Grantee: | DPAC Technologies |
| Equipment Class: | Digital Transmission System |
| Notes: | Airborne WLN-B Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03681 |
| Modular Approval. Power output is conducted. This device may only be used with the antennas listed within the certification application at the time of the original filing. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application zQ5nKcT2IVzBT9SHKtT5zQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DPAC Technologies 7321 Lincoln Way Garden Grove, CA 92841 United States |
Date of Grant: 07/13/2005 Application Dated: 07/13/2005 |
| Attention: Paul Shklanko , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTTAB-WLNB |
| Name of Grantee: | DPAC Technologies |
| Equipment Class: | Digital Transmission System |
| Notes: | Airborne WLN-B Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03681 |
| Modular Approval. Power output is conducted. This device may only be used with the antennas listed within the certification application at the time of the original filing. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 01/17/2006 Application Dated: 01/17/2006 |
| DPAC Technologies |
| 7321 Lincoln Way |
| Garden Grove, CA 92841 |
| Attention: Paul Shklanko , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTTAB-WLNB |
| Name of Grantee: | DPAC Technologies |
| Equipment Class: | Digital Transmission System |
| Notes: | AIRBORNE WLN-B MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03681 |
| Modular Approval. Power output is conducted. This device may only be used with the antennas listed within the certification application at the time of the original filing. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. This Class II Change adds two antennas as described in this filing. This device may only be used with the antennas listed in the original filing and those listed in this Class II Change submission. |
EAS Grant - Application uPzZ7b2sikZyZ1CNzFNkeg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DPAC Technologies 7321 Lincoln Way Garden Grove, CA 92841 United States |
Date of Grant: 01/17/2006 Application Dated: 01/17/2006 |
| Attention: Paul Shklanko , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTTAB-WLNB |
| Name of Grantee: | DPAC Technologies |
| Equipment Class: | Digital Transmission System |
| Notes: | AIRBORNE WLN-B MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03681 |
| Modular Approval. Power output is conducted. This device may only be used with the antennas listed within the certification application at the time of the original filing. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. This Class II Change adds two antennas as described in this filing. This device may only be used with the antennas listed in the original filing and those listed in this Class II Change submission. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 11/26/2007 Application Dated: 11/26/2007 |
| DPAC Technologies |
| 7321 Lincoln Way |
| Garden Grove, CA 92841 |
| Attention: Paul Shklanko , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTTAB-WLNB |
| Name of Grantee: | DPAC Technologies |
| Equipment Class: | Digital Transmission System |
| Notes: | AIRBORNE WLN-B MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03681 |
| Modular Approval. Power output is conducted. This device may only be used with the antennas listed within the certification application at the time of the original filing. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. (Original grant notes 07/13/2005). This class 2 permissive change adds a specific host configuration (Itron Electricity Metering Inc. electricity meter model CVSOR-A) and allows co-location with specific antenna and transmitter FCC ID: SK9AMI-2A, as described and evaluated in this filing. |
EAS Grant - Application S5+cq9Qdj6+v1gkjGQF3sw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DPAC Technologies 7321 Lincoln Way Garden Grove, CA 92841 United States |
Date of Grant: 11/26/2007 Application Dated: 11/26/2007 |
| Attention: Paul Shklanko , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTTAB-WLNB |
| Name of Grantee: | DPAC Technologies |
| Equipment Class: | Digital Transmission System |
| Notes: | AIRBORNE WLN-B MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03681 |
| Modular Approval. Power output is conducted. This device may only be used with the antennas listed within the certification application at the time of the original filing. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. (Original grant notes 07/13/2005). This class 2 permissive change adds a specific host configuration (Itron Electricity Metering Inc. electricity meter model CVSOR-A) and allows co-location with specific antenna and transmitter FCC ID: SK9AMI-2A, as described and evaluated in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 01/07/2008 Application Dated: 01/07/2008 |
| DPAC Technologies |
| 7321 Lincoln Way |
| Garden Grove, CA 92841 |
| Attention: Paul Shklanko , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTTAB-WLNB |
| Name of Grantee: | DPAC Technologies |
| Equipment Class: | Digital Transmission System |
| Notes: | Airborne WLN-B Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0368 |
| Modular Approval. Power output is conducted. This device may only be used with the antennas listed within the certification application at the time of the original filing. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. This Class II Change adds one antenna as described in this filing. This device may only be used with the antennas listed in the original filing and this listed in this Class II Change submission. |
EAS Grant - Application 3DgPhzjzwkcDrtJjeyI1dQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DPAC Technologies 7321 Lincoln Way Garden Grove, CA 92841 United States |
Date of Grant: 01/07/2008 Application Dated: 01/07/2008 |
| Attention: Paul Shklanko , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RTTAB-WLNB |
| Name of Grantee: | DPAC Technologies |
| Equipment Class: | Digital Transmission System |
| Notes: | Airborne WLN-B Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0368 |
| Modular Approval. Power output is conducted. This device may only be used with the antennas listed within the certification application at the time of the original filing. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. This Class II Change adds one antenna as described in this filing. This device may only be used with the antennas listed in the original filing and this listed in this Class II Change submission. |
| Mail To: |