FCC ID RUF150701
IntegrAlarm Control Panel
by EMTS Inc.
Grantee Code: RUF Product Code: 150701
Latest application date: 2004-06-21
FCC ID Device Details
| FCC ID | RUF150701 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RUF |
| Product Code | 150701 |
| Applicant Business | EMTS Inc. 🇨🇦 |
| Related Domains |  strategicvista.com |
| Equipment Class | IntegrAlarm Control Panel |
| Test Firm | ITL Product Testing LTD |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 916.5-926.5 MHz | Class II permissive change or modification of presently authorized equipment | 2004-06-21 |
| 916.5-926.5 MHz | Original Equipment | 2004-03-21 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Installation Guide | Users Manual | 2004-03-21 | PDF 1.6 MB |
| Users Guide | Users Manual | 2004-03-21 | PDF 1.4 MB |
| New internal photos | Internal Photos | 2004-06-21 | PDF 66.5 KB |
| internal photos | Internal Photos | 2004-03-21 | PDF 368.8 KB |
| external photos | External Photos | 2004-03-21 | PDF 84.9 KB |
| label and location | ID Label/Location Info | 2004-03-21 | PDF 30 KB |
| test setup photos | Test Setup Photos | 2004-03-21 | PDF 554.1 KB |
| New test receiver | Test Report | 2004-06-21 | PDF 312.8 KB |
| new test transmitter | Test Report | 2004-06-21 | PDF 246.7 KB |
| 15247 declaration | Test Report | 2004-03-21 | PDF 292.3 KB |
| RT and response | Test Report | 2004-03-21 | PDF 10.5 KB |
| test report | Test Report | 2004-03-21 | PDF 4 MB |
| Explanation of PCII | Cover Letter(s) | 2004-06-21 | PDF 8.5 KB |
| PC Explanation | Cover Letter(s) | 2004-06-21 | PDF 8.5 KB |
| agent authorization | Cover Letter(s) | 2004-03-21 | PDF 52 KB |
| confidentiality request | Cover Letter(s) | 2004-03-21 | PDF 42.1 KB |
| New MPE Calculation | RF Exposure Info | 2004-06-21 | PDF 74.1 KB |
| block diagram Metadata only | Block Diagram | PDF 105.5 KB | |
| control panel keyboard Metadata only | Schematics | PDF 27.9 KB | |
| control panel main Metadata only | Schematics | PDF 186.3 KB | |
| technical description Metadata only | Operational Description | PDF 38.2 KB | |
| BOM panel and keyboard Metadata only | Parts List/Tune Up Info | PDF 127.4 KB |
Application Information
| Application ID | DbyOztLFXDnoIN8FKU0jdg== |
|---|---|
| Final Action Date | 2004-06-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0009854910 |
| Model | 150701 |
| Frequency Range | 916.5-926.5 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | IntegrAlarm Control Panel |
| Responsible Party | Joel Kligman, joel@strategicvista.com , 905 946 8589 |
| Test Firm | Steli Loznen, ITL Product Testing LTD, icohen@itl.co.il  , 972-8-9186100 |
| TCB Email | tcbinfo@metlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. This Class II Permissive Change is to add a new antenna. The antenna(s) used for this transmitter must provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| DbyOztLFXDnoIN8FKU0jdg== | 2004-06-21 | Class II permissive change or modification of presently authorized equipment |
| zwf9Olyqw/6EprjJCrCOoA== | 2004-03-21 | Original Equipment |
Grants
TCB Grant - Application zwf9Olyqw/6EprjJCrCOoA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 03/21/2004 Application Dated: 03/21/2004 |
| EMTS Inc. |
| 300 Alden Road |
| Markham, L3R4C1 Canada |
| Attention: Joel Kligman |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUF150701 |
| Name of Grantee: | EMTS Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IntegrAlarm Control Panel |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 68 CE | 15C | 916.5 - 926.5 | 0.014 |
| Power output listed is conducted. The antenna(s) used for this transmitter must provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 68: | This grant does not pertain to equipment approval requirements under Part 68. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application zwf9Olyqw/6EprjJCrCOoA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EMTS Inc. 300 Alden Road Markham, L3R4C1 Canada |
Date of Grant: 03/21/2004 Application Dated: 03/21/2004 |
| Attention: Joel Kligman |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUF150701 |
| Name of Grantee: | EMTS Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IntegrAlarm Control Panel |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 68 CE | 15C | 916.5 - 926.5 | 0.014 |
| Power output listed is conducted. The antenna(s) used for this transmitter must provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 68: | This grant does not pertain to equipment approval requirements under Part 68. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 06/21/2004 Application Dated: 06/21/2004 |
| EMTS Inc. |
| 300 Alden Road |
| Markham, L3R4C1 Canada |
| Attention: Joel Kligman |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUF150701 |
| Name of Grantee: | EMTS Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IntegrAlarm Control Panel |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 68 CE | 15C | 916.5 - 926.5 | 0.014 |
| Power output listed is conducted. This Class II Permissive Change is to add a new antenna. The antenna(s) used for this transmitter must provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| 68: | This grant does not pertain to equipment approval requirements under Part 68. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application DbyOztLFXDnoIN8FKU0jdg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EMTS Inc. 300 Alden Road Markham, L3R4C1 Canada |
Date of Grant: 06/21/2004 Application Dated: 06/21/2004 |
| Attention: Joel Kligman |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUF150701 |
| Name of Grantee: | EMTS Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IntegrAlarm Control Panel |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 68 CE | 15C | 916.5 - 926.5 | 0.014 |
| Power output listed is conducted. This Class II Permissive Change is to add a new antenna. The antenna(s) used for this transmitter must provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| 68: | This grant does not pertain to equipment approval requirements under Part 68. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |