FCC ID RUF150704
Door/Window Sensor
by EMTS Inc.
Grantee Code: RUF Product Code: 150704
Latest application date: 2004-07-21
FCC ID Device Details
| FCC ID | RUF150704 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RUF |
| Product Code | 150704 |
| Applicant Business | EMTS Inc. 🇨🇦 |
| Related Domains |  strategicvista.com |
| Equipment Class | Door/Window Sensor |
| Test Firm | ITL Product Testing LTD |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 903.5-913.5 MHz | Class II permissive change or modification of presently authorized equipment | 2004-07-21 |
| 903.5-913.5 MHz | Original Equipment | 2004-02-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| manual | Users Manual | 2004-02-12 | PDF 654 KB |
| New Photo II | Internal Photos | 2004-07-21 | PDF 472.7 KB |
| New Photo III | Internal Photos | 2004-07-21 | PDF 419.7 KB |
| New photo I | Internal Photos | 2004-07-21 | PDF 538.7 KB |
| internal photos | Internal Photos | 2004-02-12 | PDF 158.9 KB |
| external photos | External Photos | 2004-02-12 | PDF 80.8 KB |
| label and location | ID Label/Location Info | 2004-02-12 | PDF 27.6 KB |
| test setup | ID Label/Location Info | 2004-02-12 | PDF 88.1 KB |
| test setup | Test Setup Photos | 2004-02-12 | PDF 88.1 KB |
| New MPE Calculation | Test Report | 2004-07-21 | PDF 74.3 KB |
| New Test report Receiver | Test Report | 2004-07-21 | PDF 309.3 KB |
| RT and Response I | Test Report | 2004-07-21 | PDF 10.9 KB |
| RT and Response II | Test Report | 2004-07-21 | PDF 11.1 KB |
| Test report transmitter | Test Report | 2004-07-21 | PDF 236.4 KB |
| Partial response to RT | Test Report | 2004-02-12 | PDF 25 KB |
| RT | Test Report | 2004-02-12 | PDF 27.5 KB |
| Response to RT | Test Report | 2004-02-12 | PDF 24.9 KB |
| Test report | Test Report | 2004-02-12 | PDF 2.5 MB |
| changes for PC | Cover Letter(s) | 2004-07-21 | PDF 26.9 KB |
| confidentiality | Cover Letter(s) | 2004-07-21 | PDF 42.6 KB |
| agent authorization | Cover Letter(s) | 2004-02-12 | PDF 52 KB |
| confidentiality request | Cover Letter(s) | 2004-02-12 | PDF 42.6 KB |
| block diagram Metadata only | Block Diagram | PDF 31.8 KB | |
| New schematics Metadata only | Schematics | PDF 38.3 KB | |
| schematics Metadata only | Schematics | PDF 55 KB | |
| technical description Metadata only | Operational Description | PDF 31.5 KB | |
| parts list Metadata only | Parts List/Tune Up Info | PDF 9 KB |
Application Information
| Application ID | 6kCMoj9b5YhVZDQupoF4og== |
|---|---|
| Final Action Date | 2004-07-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0009854910 |
| Model | 150704 |
| Frequency Range | 903.5-913.5 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Door/Window Sensor |
| Responsible Party | Joel Kligman, joel@strategicvista.com , 905 946 8589 |
| Test Firm | Steli Loznen, ITL Product Testing LTD, icohen@itl.co.il  , 972-8-9186100 |
| TCB Email | tcbinfo@metlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This Class II Change is for a new antenna. Power output listed is conducted. The antenna(s) used for this transmitter must provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 6kCMoj9b5YhVZDQupoF4og== | 2004-07-21 | Class II permissive change or modification of presently authorized equipment |
| GQ5uGdbnJNx8clNJArYZ7Q== | 2004-02-12 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 903.5-913.5 MHz | 0.0200000 | 15C |
Grants
TCB Grant - Application GQ5uGdbnJNx8clNJArYZ7Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 02/12/2004 Application Dated: 02/12/2004 |
| EMTS Inc. |
| 300 Alden Road |
| Markham, L3R4C1 Canada |
| Attention: Joel Kligman |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUF150704 |
| Name of Grantee: | EMTS Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Door/Window Sensor |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.5 - 913.5 | 0.02 |
| Power output listed is conducted. The antenna(s) used for this transmitter must provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application GQ5uGdbnJNx8clNJArYZ7Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EMTS Inc. 300 Alden Road Markham, L3R4C1 Canada |
Date of Grant: 02/12/2004 Application Dated: 02/12/2004 |
| Attention: Joel Kligman |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUF150704 |
| Name of Grantee: | EMTS Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Door/Window Sensor |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.5 - 913.5 | 0.02 |
| Power output listed is conducted. The antenna(s) used for this transmitter must provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 07/21/2004 Application Dated: 07/21/2004 |
| EMTS Inc. |
| 300 Alden Road |
| Markham, L3R4C1 Canada |
| Attention: Joel Kligman |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUF150704 |
| Name of Grantee: | EMTS Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Door/Window Sensor |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.5 - 913.5 | 0.02 |
| This Class II Change is for a new antenna. Power output listed is conducted. The antenna(s) used for this transmitter must provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 6kCMoj9b5YhVZDQupoF4og==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EMTS Inc. 300 Alden Road Markham, L3R4C1 Canada |
Date of Grant: 07/21/2004 Application Dated: 07/21/2004 |
| Attention: Joel Kligman |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUF150704 |
| Name of Grantee: | EMTS Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Door/Window Sensor |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.5 - 913.5 | 0.02 |
| This Class II Change is for a new antenna. Power output listed is conducted. The antenna(s) used for this transmitter must provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |