FCC ID RUJ-LR802UKG
802.11b/g Wireless LAN USB Module
by Qcom Technology Inc.
Grantee Code: RUJ Product Code: LR802UKG
Latest application date: 2010-01-08
FCC ID Device Details
| FCC ID | RUJ-LR802UKG |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RUJ |
| Product Code | LR802UKG |
| Applicant Business | Qcom Technology Inc. 🇹🇼 |
| Related Domains |  qcom.com.tw  adt.com.tw |
| Equipment Class | 802.11b/g Wireless LAN USB Module |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2010-01-08 |
| 2412-2462 MHz | Original Equipment | 2007-05-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2007-05-25 | PDF 1.1 MB |
| Int pho_RUJ-LR802UKG | Internal Photos | 2010-01-08 | PDF 334.5 KB |
| Internal Photos | Internal Photos | 2007-05-25 | PDF 151.6 KB |
| Ext Pho_RUJ-LR802UKG_rev | External Photos | 2010-01-08 | PDF 227.5 KB |
| External Photos | External Photos | 2007-05-25 | PDF 395.1 KB |
| Label | ID Label/Location Info | 2007-05-25 | PDF 296.8 KB |
| Operational Description | Operational Description | 2007-05-25 | PDF 16.9 KB |
| TSup_RUJ-LR802UKG_rev | Test Setup Photos | 2010-01-08 | PDF 364 KB |
| Test Setup Photos | Test Setup Photos | 2007-05-25 | PDF 284 KB |
| Test Rpt_RUJ-LR802UKG_rev | Test Report | 2010-01-08 | PDF 321.2 KB |
| Test Report | Test Report | 2007-05-25 | PDF 612.8 KB |
| Ad Hoc Declaration | Attestation Statements | 2007-05-25 | PDF 436.9 KB |
| Coverletter-Description of Change_RUJ-LR802UKG | Cover Letter(s) | 2010-01-08 | PDF 28.4 KB |
| Coverletter-POA_RUJ-LR802UKG | Cover Letter(s) | 2010-01-08 | PDF 34.5 KB |
| Agency | Cover Letter(s) | 2007-05-25 | PDF 439.8 KB |
| Confidentiality Request | Cover Letter(s) | 2007-05-25 | PDF 453.1 KB |
| Modular Approval Request | Cover Letter(s) | 2007-05-25 | PDF 23.8 KB |
| RF Exposure Info | RF Exposure Info | 2007-05-25 | PDF 33.4 KB |
Application Information
| Application ID | 0eaHFDApJI7DaBw5o1SSMw== |
|---|---|
| Final Action Date | 2010-01-08 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010228328 |
| Model | -LR802UKG |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11b/g Wireless LAN USB Module |
| Responsible Party | Ting Wu-Hu, Manager, ding@qcom.com.tw , +886-2-2658-9198 |
| Technical Contact | Gary Chang, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, Gary_chang@adt.com.tw , 886-3-3183232 |
| Non-Technical Contact | Ellis Wu, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, ellis@adt.com.tw , 886-3-3183232 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com  , 886-3-3183232 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive change for adding a new antenna type. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 0eaHFDApJI7DaBw5o1SSMw== | 2010-01-08 | Class II permissive change or modification of presently authorized equipment |
| 5pgV8ZpxIoNJOQ+KFVj0KA== | 2007-05-25 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0640000 | 15C |
Grants
TCB Grant - Application 5pgV8ZpxIoNJOQ+KFVj0KA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 | Date of Grant: 05/25/2007 Application Dated: 05/25/2007 |
| Qcom Technology Inc. |
| 4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist. |
| Taipei, Taiwan |
| Attention: Ting Wu-Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUJ-LR802UKG |
| Name of Grantee: | Qcom Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Wireless LAN USB Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.064 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application 5pgV8ZpxIoNJOQ+KFVj0KA==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Qcom Technology Inc. 4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist. Taipei, Taiwan | Date of Grant: 05/25/2007 Application Dated: 05/25/2007 |
| Attention: Ting Wu-Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUJ-LR802UKG |
| Name of Grantee: | Qcom Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Wireless LAN USB Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.064 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
|
| Mail To: |
| EA716588 |
TCB Grant - Application 0eaHFDApJI7DaBw5o1SSMw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 01/08/2010 Application Dated: 01/08/2010 |
| Qcom Technology Inc. |
| 4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist. |
| Taipei, Taiwan |
| Attention: Ting Wu-Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUJ-LR802UKG |
| Name of Grantee: | Qcom Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Wireless LAN USB Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.064 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive change for adding a new antenna type. |
EAS Grant - Application 0eaHFDApJI7DaBw5o1SSMw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qcom Technology Inc. 4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist. Taipei, Taiwan |
Date of Grant: 01/08/2010 Application Dated: 01/08/2010 |
| Attention: Ting Wu-Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUJ-LR802UKG |
| Name of Grantee: | Qcom Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Wireless LAN USB Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.064 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive change for adding a new antenna type. |
| Mail To: |