FCC ID RUJ-Q802MKG

MiniPCI 802.11g Wireless LAN Card

by Qcom Technology Inc.

Grantee Code: RUJ   Product Code: Q802MKG
Latest application date: 2004-09-21

FCC ID Device Details

FCC IDRUJ-Q802MKG
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRUJ
Product CodeQ802MKG
Applicant BusinessQcom Technology Inc. 🇹🇼
Related Domains qcom.com.tw
Equipment ClassMiniPCI 802.11g Wireless LAN Card
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2004-09-21

Exhibits

DocumentTypeAvailableFile
Revised ManualUsers Manual2004-09-21PDF 1.2 MB
Internal PicsInternal Photos2004-09-21PDF 741.7 KB
External PicsExternal Photos2004-09-21PDF 867.8 KB
Label and LocationID Label/Location Info2004-09-21PDF 268.9 KB
SchemaSchematics2004-09-21PDF 104.9 KB
Op DescriptionOperational Description2004-09-21PDF 51.1 KB
Test SetupTest Setup Photos2004-09-21PDF 327.5 KB
Test ReportTest Report2004-09-21PDF 998.4 KB
ATCB CommentsCover Letter(s)2004-09-21PDF 14.6 KB
Confid RequestCover Letter(s)2004-09-21PDF 61.4 KB
DofCCover Letter(s)2004-09-21PDF 437 KB
POACover Letter(s)2004-09-21PDF 29.5 KB
Revised Modular Approval RequestCover Letter(s)2004-09-21PDF 101.2 KB
RF ExposureRF Exposure Info2004-09-21PDF 89.7 KB
Block Metadata onlyBlock DiagramPDF 24.9 KB

Application Information

Application ID8F6BoMlNshnNWCVmnePV0w==
Final Action Date2004-09-21
Application PurposeOriginal Equipment
Applicant FRN0010228328
ModelQ802MKG
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMiniPCI 802.11g Wireless LAN Card
Responsible PartyTing Wu-Hu, Manager, ding@qcom.com.tw , +886-2-2658-9198
Technical ContactEllis Wu, Advance Data Technology Corporation, ellis@adt.com.tw , +886 3 318 3232
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-3-3183232
TCB Emailhotline@americanTCB.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product integrating this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
8F6BoMlNshnNWCVmnePV0w==2004-09-21Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.052000015C

Grants

TCB Grant - Application 8F6BoMlNshnNWCVmnePV0w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/21/2004

Application Dated: 09/21/2004
Qcom Technology Inc.
4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist.
Taipei,
Taiwan
 
Attention: Ting Wu-Hu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RUJ-Q802MKG
Name of Grantee:  Qcom Technology Inc.
Equipment Class: Digital Transmission System
Notes: MiniPCI 802.11g Wireless LAN Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.052  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product integrating this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 8F6BoMlNshnNWCVmnePV0w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Qcom Technology Inc.
4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist.
Taipei,
Taiwan
  Date of Grant: 09/21/2004

Application Dated: 09/21/2004
 
Attention: Ting Wu-Hu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RUJ-Q802MKG
Name of Grantee:  Qcom Technology Inc.
Equipment Class: Digital Transmission System
Notes: MiniPCI 802.11g Wireless LAN Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.052  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product integrating this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: