FCC ID RUJ-QBT400UB
Bluetooth Module
by Qcom Technology Inc.
Grantee Code: RUJ Product Code: QBT400UB
Latest application date: 2007-12-04
FCC ID Device Details
| FCC ID | RUJ-QBT400UB |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RUJ |
| Product Code | QBT400UB |
| Applicant Business | Qcom Technology Inc. 🇹🇼 |
| Related Domains |  qcom.com.tw  adt.com.tw |
| Equipment Class | Bluetooth Module |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2007-12-04 |
| 2402-2480 MHz | Original Equipment | 2007-11-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2007-11-12 | PDF 2.1 MB |
| Internal Photos | Internal Photos | 2007-12-04 | PDF 79.9 KB |
| Internal Photos | Internal Photos | 2007-11-12 | PDF 268.8 KB |
| External Photos | External Photos | 2007-12-04 | PDF 188.3 KB |
| External Photos | External Photos | 2007-11-12 | PDF 169.6 KB |
| Label | ID Label/Location Info | 2007-11-12 | PDF 138.4 KB |
| Operational Description | Operational Description | 2007-11-12 | PDF 17.9 KB |
| Test Setup Photos | Test Setup Photos | 2007-12-04 | PDF 676.8 KB |
| Test Setup Photos | Test Setup Photos | 2007-11-12 | PDF 1.5 MB |
| Test Report | Test Report | 2007-12-04 | PDF 245.2 KB |
| Test Report | Test Report | 2007-11-12 | PDF 760.9 KB |
| Confidentiality Request | Cover Letter(s) | 2007-12-04 | PDF 405.7 KB |
| Description of Change | Cover Letter(s) | 2007-12-04 | PDF 28.1 KB |
| Agency | Cover Letter(s) | 2007-11-12 | PDF 393.4 KB |
| Modular Approval Request | Cover Letter(s) | 2007-11-12 | PDF 47 KB |
| RF Exposure Info | RF Exposure Info | 2007-11-12 | PDF 16.8 KB |
Application Information
| Application ID | LwZ1qCPmwXQNnyW0bTYFEw== |
|---|---|
| Final Action Date | 2007-12-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010228328 |
| Model | -QBT400UB |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth Module |
| Responsible Party | Ting Wu-Hu, Manager, ding@qcom.com.tw , +886-2-2658-9198 |
| Technical Contact | Gary Chang, Advance Data Technology Corporation (Hwa Ya), Gary@adt.com.tw , 886-3-3183232 |
| Non-Technical Contact | Ellis Wu, Advance Data Technology Corporation, ellis@adt.com.tw , 886-3-3183232 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com  , 886-3-3183232 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change for adding one new model with no onboard PCB antenna. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| LwZ1qCPmwXQNnyW0bTYFEw== | 2007-12-04 | Class II permissive change or modification of presently authorized equipment |
| wt2bpCbc6ZZKKQiKiBn0uQ== | 2007-11-12 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0010000 | 15C |
Grants
TCB Grant - Application wt2bpCbc6ZZKKQiKiBn0uQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 11/12/2007 Application Dated: 11/12/2007 |
| Qcom Technology Inc. |
| 4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist. |
| Taipei, Taiwan |
| Attention: Ting Wu-Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUJ-QBT400UB |
| Name of Grantee: | Qcom Technology Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
EAS Grant - Application wt2bpCbc6ZZKKQiKiBn0uQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qcom Technology Inc. 4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist. Taipei, Taiwan |
Date of Grant: 11/12/2007 Application Dated: 11/12/2007 |
| Attention: Ting Wu-Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUJ-QBT400UB |
| Name of Grantee: | Qcom Technology Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 12/04/2007 Application Dated: 12/04/2007 |
| Qcom Technology Inc. |
| 4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist. |
| Taipei, Taiwan |
| Attention: Ting Wu-Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUJ-QBT400UB |
| Name of Grantee: | Qcom Technology Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 |
| Class II Permissive Change for adding one new model with no onboard PCB antenna. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
EAS Grant - Application LwZ1qCPmwXQNnyW0bTYFEw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qcom Technology Inc. 4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist. Taipei, Taiwan |
Date of Grant: 12/04/2007 Application Dated: 12/04/2007 |
| Attention: Ting Wu-Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUJ-QBT400UB |
| Name of Grantee: | Qcom Technology Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 |
| Class II Permissive Change for adding one new model with no onboard PCB antenna. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
| Mail To: |