FCC ID RUJ-QBTM400

FCC ID	RUJ-QBTM400
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	RUJ
Product Code	QBTM400
Applicant Business	Qcom Technology Inc. 🇹🇼
Related Domains	qcom.com.tw adt.com.tw
Equipment Class	Bluetooth Module
Test Firm	Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Frequency Range	Application Purpose	Final Action Date
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2009-09-28
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2008-12-23
2402-2480 MHz	Original Equipment	2006-01-12

Document	Type	Available	File
Manual	Users Manual	2006-01-12	PDF 220.7 KB
Internal Photos	Internal Photos	2009-09-28	PDF 494.3 KB
Internal Photos	Internal Photos	2008-12-23	PDF 177.4 KB
Internal Photos	Internal Photos	2006-01-12	PDF 248.5 KB
External Photos	External Photos	2009-09-28	PDF 105.9 KB
External Photos	External Photos	2008-12-23	PDF 289.4 KB
External Photos	External Photos	2006-01-12	PDF 103.6 KB
Label	ID Label/Location Info	2006-01-12	PDF 83.9 KB
Operational Description	Operational Description	2006-01-12	PDF 41.2 KB
Test Setup Photos	Test Setup Photos	2009-09-28	PDF 179.8 KB
Test Setup Photos	Test Setup Photos	2008-12-23	PDF 936.9 KB
Test Setup Photos	Test Setup Photos	2006-01-12	PDF 281.3 KB
Test Report	Test Report	2009-09-28	PDF 374.1 KB
Test Report	Test Report	2008-12-23	PDF 361.7 KB
Test Report	Test Report	2006-01-12	PDF 3.1 MB
Coverletter Description of Change	Cover Letter(s)	2009-09-28	PDF 13.7 KB
Coverletter POA	Cover Letter(s)	2009-09-28	PDF 36.7 KB
Cover Letter Agency	Cover Letter(s)	2008-12-23	PDF 35.2 KB
Cover Letter Description of Change	Cover Letter(s)	2008-12-23	PDF 11.8 KB
Agency Letter	Cover Letter(s)	2006-01-12	PDF 73.5 KB
Confidentiality Request	Cover Letter(s)	2006-01-12	PDF 90.3 KB
Modular Approval Request	Cover Letter(s)	2006-01-12	PDF 57.8 KB
RF Exposure Info	RF Exposure Info	2009-09-28	PDF 17.4 KB
RF Exposure Info	RF Exposure Info	2008-12-23	PDF 17 KB
RF Exposure Info	RF Exposure Info	2006-01-12	PDF 80.9 KB
Block Diagram Metadata only	Block Diagram		PDF 64.1 KB
Schematics Metadata only	Schematics		PDF 45.4 KB

Application ID	00wO9r9eiwGk4i0UeeTTRg==
Final Action Date	2009-09-28
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0010228328
Model	-QBTM400
Frequency Range	2402-2480 MHz
Equipment Class	DSS - Part 15 Spread Spectrum Transmitter
Device Description	Bluetooth Module
Responsible Party	Ting Wu-Hu, Manager, ding@qcom.com.tw , +886-2-2658-9198
Technical Contact	Gary Chang, Bureau Veritas Consumer Products Services (H.K.) L, Gary_chang@adt.com.tw , 886-3-3183232
Non-Technical Contact	Ellis Wu, Bureau Veritas Consumer Products Services (H.K.), ellis@adt.com.tw , 886-3-3183232
Test Firm	Richard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-3-3183232
TCB Email	certification@curtis-straus.com
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	No
Long-Term Confidentiality	No
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	No
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Class II Permissive Change for adding new antenna and specific mobile collocation condition with WLAN module (FCC ID: VQF-RT2700E) as described in this filing.

Application ID	Date	Purpose
00wO9r9eiwGk4i0UeeTTRg==	2009-09-28	Class II permissive change or modification of presently authorized equipment
Khtbv4kF/humU9eivhZiDg==	2008-12-23	Class II permissive change or modification of presently authorized equipment
ZxcG0CznvsXIl9giag7aQA==	2006-01-12	Original Equipment

Frequency	Output	Rules
2402-2480 MHz	0.0020000	15C

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460

Date of Grant: 01/12/2006

Application Dated: 01/12/2006

Qcom Technology Inc.

4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist.

Taipei,
Taiwan

Attention: Ting Wu-Hu , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	RUJ-QBTM400

Name of Grantee:	Qcom Technology Inc.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0 - 2480.0	0.002

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Qcom Technology Inc.
4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist.
Taipei,
Taiwan

Date of Grant: 01/12/2006

Application Dated: 01/12/2006

Attention: Ting Wu-Hu , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	RUJ-QBTM400

Name of Grantee:	Qcom Technology Inc.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0 - 2480.0	0.002

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID.

TCB Grant - Application Khtbv4kF/humU9eivhZiDg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460

Date of Grant: 12/23/2008

Application Dated: 12/23/2008

Qcom Technology Inc.

4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist.

Taipei,
Taiwan

Attention: Ting Wu-Hu , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	RUJ-QBTM400

Name of Grantee:	Qcom Technology Inc.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0 - 2480.0	0.002

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Class II Permissive Change for adding new antenna.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Qcom Technology Inc.
4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist.
Taipei,
Taiwan

Date of Grant: 12/23/2008

Application Dated: 12/23/2008

Attention: Ting Wu-Hu , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	RUJ-QBTM400

Name of Grantee:	Qcom Technology Inc.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0 - 2480.0	0.002

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Class II Permissive Change for adding new antenna.

TCB Grant - Application 00wO9r9eiwGk4i0UeeTTRg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460

Date of Grant: 09/28/2009

Application Dated: 09/28/2009

Qcom Technology Inc.

4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist.

Taipei,
Taiwan

Attention: Ting Wu-Hu , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	RUJ-QBTM400

Name of Grantee:	Qcom Technology Inc.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0 - 2480.0	0.002

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Class II Permissive Change for adding new antenna and specific mobile collocation condition with WLAN module (FCC ID: VQF-RT2700E) as described in this filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Qcom Technology Inc.
4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist.
Taipei,
Taiwan

Date of Grant: 09/28/2009

Application Dated: 09/28/2009

Attention: Ting Wu-Hu , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	RUJ-QBTM400

Name of Grantee:	Qcom Technology Inc.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0 - 2480.0	0.002

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Class II Permissive Change for adding new antenna and specific mobile collocation condition with WLAN module (FCC ID: VQF-RT2700E) as described in this filing.

Mail To:

Bluetooth Module

by Qcom Technology Inc.

Grantee Code: RUJ Product Code: QBTM400

Latest application date: 2009-09-28

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application ZxcG0CznvsXIl9giag7aQA==

EAS Grant - Application ZxcG0CznvsXIl9giag7aQA==

TCB Grant - Application Khtbv4kF/humU9eivhZiDg==

EAS Grant - Application Khtbv4kF/humU9eivhZiDg==

TCB Grant - Application 00wO9r9eiwGk4i0UeeTTRg==

EAS Grant - Application 00wO9r9eiwGk4i0UeeTTRg==