FCC ID RUJ-Q802MIAG
Mini-PCI 802.11a/b/g Wireless LAN Card
by Qcom Technology Inc.
Grantee Code: RUJ Product Code: Q802MIAG
Latest application date: 2004-10-03
FCC ID Device Details
| FCC ID | RUJ-Q802MIAG |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RUJ |
| Product Code | Q802MIAG |
| Applicant Business | Qcom Technology Inc. 🇹🇼 |
| Related Domains |  qcom.com.tw |
| Equipment Class | Mini-PCI 802.11a/b/g Wireless LAN Card |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5150-5250 MHz | Original Equipment | 2004-10-03 |
| 2412-2462 MHz | Original Equipment | 2004-10-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2004-10-03 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2004-10-03 | PDF 336.9 KB |
| Ext Photos | External Photos | 2004-10-03 | PDF 710.8 KB |
| External Photos | External Photos | 2004-10-03 | PDF 710.8 KB |
| Label and Location | ID Label/Location Info | 2004-10-03 | PDF 101.7 KB |
| Revised Operational Description | Operational Description | 2004-10-03 | PDF 9.6 KB |
| Test Setup | Test Setup Photos | 2004-10-03 | PDF 236 KB |
| Test Setup Photos | Test Setup Photos | 2004-10-03 | PDF 236 KB |
| Revised Test Report | Test Report | 2004-10-03 | PDF 1.4 MB |
| Test Report | Test Report | 2004-10-03 | PDF 1.3 MB |
| ATCB Comments | Cover Letter(s) | 2004-10-03 | PDF 15 KB |
| Confid Request | Cover Letter(s) | 2004-10-03 | PDF 21.7 KB |
| DofC | Cover Letter(s) | 2004-10-03 | PDF 31.6 KB |
| Modular Request | Cover Letter(s) | 2004-10-03 | PDF 63.4 KB |
| POA | Cover Letter(s) | 2004-10-03 | PDF 16.8 KB |
| Antenna Spec | RF Exposure Info | 2004-10-03 | PDF 380 KB |
| Antenna Specs | RF Exposure Info | 2004-10-03 | PDF 380 KB |
| Revised RF Exposure | RF Exposure Info | 2004-10-03 | PDF 98.5 KB |
| Revised Block Metadata only | Block Diagram | PDF 122.7 KB | |
| Revised Block Diagram Metadata only | Block Diagram | PDF 122.7 KB | |
| Schema Metadata only | Schematics | PDF 637.1 KB |
Application Information
| Application ID | gq5AeFOK3hoacREnI98gMA== |
|---|---|
| Final Action Date | 2004-10-03 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0010228328 |
| Model | Q802MIAG |
| Frequency Range | 5150-5250 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Mini-PCI 802.11a/b/g Wireless LAN Card |
| Responsible Party | Ting Wu-Hu, Manager, ding@qcom.com.tw , +886-2-2658-9198 |
| Technical Contact | Ellis Wu, Advance Data Technology Corporation, ellis@adt.com.tw  , +886 3 318 3232 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com  , 886-3-3183232 |
| TCB Email | hotline@americanTCB.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| gq5AeFOK3hoacREnI98gMA== | 2004-10-03 | Original Equipment |
| Y5K8TzlY7S6VHRABpAkZMQ== | 2004-10-03 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Y5K8TzlY7S6VHRABpAkZMQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/03/2004 Application Dated: 10/03/2004 |
| Qcom Technology Inc. |
| 4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist. |
| Taipei, Taiwan |
| Attention: Ting Wu-Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUJ-Q802MIAG |
| Name of Grantee: | Qcom Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Mini-PCI 802.11a/b/g Wireless LAN Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.052 |
| Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application Y5K8TzlY7S6VHRABpAkZMQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qcom Technology Inc. 4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist. Taipei, Taiwan |
Date of Grant: 10/03/2004 Application Dated: 10/03/2004 |
| Attention: Ting Wu-Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUJ-Q802MIAG |
| Name of Grantee: | Qcom Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Mini-PCI 802.11a/b/g Wireless LAN Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.052 |
| Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/03/2004 Application Dated: 10/03/2004 |
| Qcom Technology Inc. |
| 4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist. |
| Taipei, Taiwan |
| Attention: Ting Wu-Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUJ-Q802MIAG |
| Name of Grantee: | Qcom Technology Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Mini-PCI 802.11a/b/g Wireless LAN Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5150.0 - 5250.0 | 0.032 | |||
| 15E | 5250.0 - 5350.0 | 0.032 | |||
| 20 | 15E | 5725.0 - 5825.0 | 0.032 |
| Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application gq5AeFOK3hoacREnI98gMA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qcom Technology Inc. 4F., No.301, Sec. 2, Tiding Blvd. Neihu Dist. Taipei, Taiwan |
Date of Grant: 10/03/2004 Application Dated: 10/03/2004 |
| Attention: Ting Wu-Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUJ-Q802MIAG |
| Name of Grantee: | Qcom Technology Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Mini-PCI 802.11a/b/g Wireless LAN Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5150.0 - 5250.0 | 0.032 | |||
| 15E | 5250.0 - 5350.0 | 0.032 | |||
| 20 | 15E | 5725.0 - 5825.0 | 0.032 |
| Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |