FCC ID RUT1200W
802.11 Dual Band Access Point
by Alcatel Internetworking, Inc
Grantee Code: RUT Product Code: 1200W
Latest application date: 2004-06-18
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2004-06-18 |
| 5180-5240 MHz | Original Equipment | 2004-06-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2004-06-18 | PDF 454.7 KB |
| Internal Photos | Internal Photos | 2004-06-18 | PDF 1.4 MB |
| External Photos | External Photos | 2004-06-18 | PDF 456.9 KB |
| Label Placement | ID Label/Location Info | 2004-06-18 | PDF 48.2 KB |
| Labeling Information Sample Revised Metadata only | ID Label/Location Info | 2004-06-18 | PDF 614.2 KB |
| Labeling Placement | ID Label/Location Info | 2004-06-18 | PDF 48.2 KB |
| Sample Label Revised | ID Label/Location Info | 2004-06-18 | PDF 554.8 KB |
| Operational Description | Operational Description | 2004-06-18 | PDF 223.6 KB |
| Test Photos Revised | Test Setup Photos | 2004-06-18 | PDF 405 KB |
| DTS Test Report Revised | Test Report | 2004-06-18 | PDF 725.8 KB |
| Dual TX Report Revised | Test Report | 2004-06-18 | PDF 165.4 KB |
| Test Report Dual Transmit Revised | Test Report | 2004-06-18 | PDF 165.4 KB |
| UNII Report Revised | Test Report | 2004-06-18 | PDF 1.1 MB |
| 15 407 CDEG Info Revised | Cover Letter(s) | 2004-06-18 | PDF 113.9 KB |
| 15 407 CDEG Revised Metadata only | Cover Letter(s) | 2004-06-18 | PDF 113.9 KB |
| Class A Justification | Cover Letter(s) | 2004-06-18 | PDF 32 KB |
| Confidentiality Letter Revised | Cover Letter(s) | 2004-06-18 | PDF 87.6 KB |
| RF Exposure Info | RF Exposure Info | 2004-06-18 | PDF 94.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 28 KB | |
| Schematics Metadata only | Schematics | PDF 1 MB |
Application Information
| Application ID | p4Jsw9oXheV2bPA0amnv8w== |
|---|---|
| Final Action Date | 2004-06-18 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0010359685 |
| Model | 1200W |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11 Dual Band Access Point |
| Responsible Party | Genevieve Silveroli, VP and Head of Legal Compliance, gen.silveroli@nokia.com  , 972-374-3000 |
| Agent | David David David, Consultant, david@waitt.us  , 408-832-7053 |
| Technical Contact | David Waitt, Consultant, david@waitt.us , 408-832-7053 |
| Non-Technical Contact | David Waitt, Consultant, david@waitt.us , 408-832-7053 |
| Test Firm | David Bare, Elliott Laboratories LLC, dbare@elliottlabs.com  , 408-245-7800 |
| TCB Email | hotline@AmericanTCB.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. In order to comply with the integral antenna requirement 15.407(d), any external antennas for use in the 5.15 - 5.25 GHz UNII band must be for indoor use only and must be either professionally installed such that all connections are made permanent at the time of installation or ship from the factory with permanent connections. Installation of external 5 GHz antennas that are not professionally installed or that are not considered to contain permanent connections must not allow the external antennas to operate in the 5.15 - 5.25 GHz UNII Band. End users must only be able to select the use of the 5.15-5.25 GHz band for external antennas for installations that utilize permanent connections due to professional installation or permanent connection which were made at the factory. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| p4Jsw9oXheV2bPA0amnv8w== | 2004-06-18 | Original Equipment |
| NUk3huErO2HHMjpM760new== | 2004-06-18 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application p4Jsw9oXheV2bPA0amnv8w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/18/2004 Application Dated: 06/18/2004 |
| Alcatel Internetworking, Inc |
| 6000 Connection Drive |
| Irving, TX 75039 |
| Attention: Genevieve Silveroli , VP and Head of Legal Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUT1200W |
| Name of Grantee: | Alcatel Internetworking, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC CE | 15C | 2412.0 - 2462.0 | 0.079 |
| Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. In order to comply with the integral antenna requirement 15.407(d), any external antennas for use in the 5.15 - 5.25 GHz UNII band must be for indoor use only and must be either professionally installed such that all connections are made permanent at the time of installation or ship from the factory with permanent connections. Installation of external 5 GHz antennas that are not professionally installed or that are not considered to contain permanent connections must not allow the external antennas to operate in the 5.15 - 5.25 GHz UNII Band. End users must only be able to select the use of the 5.15-5.25 GHz band for external antennas for installations that utilize permanent connections due to professional installation or permanent connection which were made at the factory. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application p4Jsw9oXheV2bPA0amnv8w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Alcatel Internetworking, Inc 6000 Connection Drive Irving, TX 75039 United States |
Date of Grant: 06/18/2004 Application Dated: 06/18/2004 |
| Attention: Genevieve Silveroli , VP and Head of Legal Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUT1200W |
| Name of Grantee: | Alcatel Internetworking, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC CE | 15C | 2412.0 - 2462.0 | 0.079 |
| Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. In order to comply with the integral antenna requirement 15.407(d), any external antennas for use in the 5.15 - 5.25 GHz UNII band must be for indoor use only and must be either professionally installed such that all connections are made permanent at the time of installation or ship from the factory with permanent connections. Installation of external 5 GHz antennas that are not professionally installed or that are not considered to contain permanent connections must not allow the external antennas to operate in the 5.15 - 5.25 GHz UNII Band. End users must only be able to select the use of the 5.15-5.25 GHz band for external antennas for installations that utilize permanent connections due to professional installation or permanent connection which were made at the factory. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/18/2004 Application Dated: 06/18/2004 |
| Alcatel Internetworking, Inc |
| 6000 Connection Drive |
| Irving, TX 75039 |
| Attention: Genevieve Silveroli , VP and Head of Legal Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUT1200W |
| Name of Grantee: | Alcatel Internetworking, Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC CE | 15E | 5180.0 - 5240.0 | 0.034 | ||
| CC CE | 15E | 5260.0 - 5320.0 | 0.121 | ||
| CC CE | 15E | 5745.0 - 5805.0 | 0.093 |
| Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. The maximum net effective gain of any external 5 GHz antenna is 7.4 dBi. In order to comply with the integral antenna requirement 15.407(d), any external antennas for use in the 5.15 - 5.25 GHz UNII band must be for indoor use only and must be either professionally installed such that all connections are made permanent at the time of installation or ship from the factory with permanent connections. Installation of external 5 GHz antennas that are not professionally installed or that are not considered to contain permanent connections must not allow the external antennas to operate in the 5.15 - 5.25 GHz UNII Band. End users must only be able to select the use of the 5.15-5.25 GHz band for external antennas for installations that utilize permanent connections due to professional installation or permanent connection which were made at the factory. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application NUk3huErO2HHMjpM760new==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Alcatel Internetworking, Inc 6000 Connection Drive Irving, TX 75039 United States |
Date of Grant: 06/18/2004 Application Dated: 06/18/2004 |
| Attention: Genevieve Silveroli , VP and Head of Legal Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RUT1200W |
| Name of Grantee: | Alcatel Internetworking, Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC CE | 15E | 5180.0 - 5240.0 | 0.034 | ||
| CC CE | 15E | 5260.0 - 5320.0 | 0.121 | ||
| CC CE | 15E | 5745.0 - 5805.0 | 0.093 |
| Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. The maximum net effective gain of any external 5 GHz antenna is 7.4 dBi. In order to comply with the integral antenna requirement 15.407(d), any external antennas for use in the 5.15 - 5.25 GHz UNII band must be for indoor use only and must be either professionally installed such that all connections are made permanent at the time of installation or ship from the factory with permanent connections. Installation of external 5 GHz antennas that are not professionally installed or that are not considered to contain permanent connections must not allow the external antennas to operate in the 5.15 - 5.25 GHz UNII Band. End users must only be able to select the use of the 5.15-5.25 GHz band for external antennas for installations that utilize permanent connections due to professional installation or permanent connection which were made at the factory. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |