FCC ID RX3-WBU042IG

IEEE 802.11 a/b/g/n/ac 2x2 + BT combo module

by Hon Hai Precision Industry Co., Ltd.

Grantee Code: RX3   Product Code: WBU042IG
Latest application date: 2019-06-17

FCC ID Device Details

FCC IDRX3-WBU042IG
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRX3
Product CodeWBU042IG
Applicant BusinessHon Hai Precision Industry Co., Ltd. 🇹🇼
Related Domains foxconn.com
Equipment ClassIEEE 802.11 a/b/g/n/ac 2x2 + BT combo module
Test FirmTUV Rheinland Taiwan Ltd. Taipei Testing Lab.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2019-06-17
2402-2480 MHzOriginal Equipment2019-06-17
2402-2480 MHzOriginal Equipment2019-06-17

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2019-06-17PDF 1 MB
Int. PhotosInternal Photos2019-06-17PDF 471.7 KB
Ext. PhotosExternal Photos2019-06-17PDF 2.6 MB
Label n LocationID Label/Location Info2019-06-17PDF 471.6 KB
Block DiagramBlock Diagram2019-06-17PDF 144.4 KB
Setup PhotosTest Setup Photos2019-06-17PDF 412.2 KB
Setup PhotosTest Setup Photos2019-06-17PDF 412.4 KB
Test ReportTest Report2019-06-17PDF 5.8 MB
Test ReportTest Report2019-06-17PDF 2.8 MB
Test Report BLETest Report2019-06-17PDF 1.7 MB
Test Report WiFiTest Report2019-06-17PDF 4.9 MB
Test ResultsTest Report2019-06-17PDF 5.5 MB
Test ResultsTest Report2019-06-17PDF 2.7 MB
Test Results BLETest Report2019-06-17PDF 1.5 MB
Test Results WiFiTest Report2019-06-17PDF 5.3 MB
Conf Req LetterCover Letter(s)2019-06-17PDF 33.4 KB
Modular Appr LetterCover Letter(s)2019-06-17PDF 355.6 KB
RF ExposureRF Exposure Info2019-06-17PDF 82.3 KB
RF ExposureRF Exposure Info2019-06-17PDF 82.3 KB
RF Exposure BLERF Exposure Info2019-06-17PDF 82.3 KB
RF Exposure WiFiRF Exposure Info2019-06-17PDF 82.3 KB
Schematic Metadata onlySchematicsPDF 183.5 KB
Ant Desc Metadata onlyOperational DescriptionPDF 1.7 MB
Operational Description Metadata onlyOperational DescriptionPDF 1 MB
Software Security Attestation Metadata onlySDR Software/Security InfPDF 130.8 KB

Application Information

Application IDjZb0RXxAXLEAMF/XR188xg==
Final Action Date2019-06-17
Application PurposeOriginal Equipment
Applicant FRN0022375083
ModelWBU042IG
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionIEEE 802.11 a/b/g/n/ac 2x2 + BT combo module
Responsible PartyCathy Kuo, cathy.cj.kuo@foxconn.com , +886-2-2268-3466
Test FirmKenji Lin, TUV Rheinland Taiwan Ltd. Taipei Testing Lab., KenjiST.Lin@tuv.com , +886 2-2172-7000
TCB Emailtcb-hotline@tuv.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is conducted. This grant is valid only when the module is sold to OEM integrators and the host integrator must follow the integration instructions provided by the module manufacturer. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The antenna of this transmitter must be installed to provide a separation distance of at least 20cm from all persons or compliance must be demonstrated according to FCC SAR procedures. This device has 20/40/80 MHz bandwidths

Applications

Application IDDatePurpose
jZb0RXxAXLEAMF/XR188xg==2019-06-17Original Equipment
IRhq7mT/Z/KbkqyNY8+GFA==2019-06-17Original Equipment
Du9dLaYmFanaKUKbjy6M9A==2019-06-17Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002115CCC
2402-2480 MHz0.004330015CCC
2412-2462 MHz0.0626615CCC, MO
5180-5240 MHz0.0473215E38, CC, MO
5260-5320 MHz0.049215E38, CC, MO
5500-5720 MHz0.0490915E38, CC, MO
5745-5825 MHz0.0488715E38, CC, MO

Grants

TCB Grant - Application jZb0RXxAXLEAMF/XR188xg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 06/17/2019

Application Dated: 06/11/2019
Hon Hai Precision Industry Co., Ltd.
No.151, Sec. 1, Nankan Rd., Lujhu Dist.,
Taoyuan City, 33859
Taiwan
 
Attention: Cathy Kuo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RX3-WBU042IG
Name of Grantee:  Hon Hai Precision Industry Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac 2x2 + BT combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.04732  
38 CC MO 15E 5500.0  -  5720.0 0.04909  
38 CC MO 15E 5745.0  -  5825.0 0.04887  
38 CC MO 15E 5260.0  -  5320.0 0.0492  

Output Power listed is conducted.

This grant is valid only when the module is sold to OEM integrators and the host integrator must follow the integration instructions provided by the module manufacturer. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The antenna of this transmitter must be installed to provide a separation distance of at least 20cm from all persons or compliance must be demonstrated according to FCC SAR procedures. This device has 20/40/80 MHz bandwidths


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application jZb0RXxAXLEAMF/XR188xg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hon Hai Precision Industry Co., Ltd.
No.151, Sec. 1, Nankan Rd., Lujhu Dist.,
Taoyuan City, 33859
Taiwan
  Date of Grant: 06/17/2019

Application Dated: 06/11/2019
 
Attention: Cathy Kuo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RX3-WBU042IG
Name of Grantee:  Hon Hai Precision Industry Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac 2x2 + BT combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.04732  
38 CC MO 15E 5500.0  -  5720.0 0.04909  
38 CC MO 15E 5745.0  -  5825.0 0.04887  
38 CC MO 15E 5260.0  -  5320.0 0.0492  

Output Power listed is conducted.

This grant is valid only when the module is sold to OEM integrators and the host integrator must follow the integration instructions provided by the module manufacturer. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The antenna of this transmitter must be installed to provide a separation distance of at least 20cm from all persons or compliance must be demonstrated according to FCC SAR procedures. This device has 20/40/80 MHz bandwidths


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application IRhq7mT/Z/KbkqyNY8+GFA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 06/17/2019

Application Dated: 06/11/2019
Hon Hai Precision Industry Co., Ltd.
No.151, Sec. 1, Nankan Rd., Lujhu Dist.,
Taoyuan City, 33859
Taiwan
 
Attention: Cathy Kuo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RX3-WBU042IG
Name of Grantee:  Hon Hai Precision Industry Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11 a/b/g/n/ac 2x2 + BT combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00433  

Output Power listed is conducted.

This grant is valid only when the module is sold to OEM integrators and the host integrator must follow the integration instructions provided by the module manufacturer. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The antenna of this transmitter must be installed to provide a separation distance of at least 20cm from all persons or compliance must be demonstrated according to FCC SAR procedures.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application IRhq7mT/Z/KbkqyNY8+GFA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hon Hai Precision Industry Co., Ltd.
No.151, Sec. 1, Nankan Rd., Lujhu Dist.,
Taoyuan City, 33859
Taiwan
  Date of Grant: 06/17/2019

Application Dated: 06/11/2019
 
Attention: Cathy Kuo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RX3-WBU042IG
Name of Grantee:  Hon Hai Precision Industry Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11 a/b/g/n/ac 2x2 + BT combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00433  

Output Power listed is conducted.

This grant is valid only when the module is sold to OEM integrators and the host integrator must follow the integration instructions provided by the module manufacturer. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The antenna of this transmitter must be installed to provide a separation distance of at least 20cm from all persons or compliance must be demonstrated according to FCC SAR procedures.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Du9dLaYmFanaKUKbjy6M9A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 06/17/2019

Application Dated: 06/11/2019
Hon Hai Precision Industry Co., Ltd.
No.151, Sec. 1, Nankan Rd., Lujhu Dist.,
Taoyuan City, 33859
Taiwan
 
Attention: Cathy Kuo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RX3-WBU042IG
Name of Grantee:  Hon Hai Precision Industry Co., Ltd.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac 2x2 + BT combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0021  
CC MO 15C 2412.0  -  2462.0 0.06266  

Output Power listed is conducted.

This grant is valid only when the module is sold to OEM integrators and the host integrator must follow the integration instructions provided by the module manufacturer. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The antenna of this transmitter must be installed to provide a separation distance of at least 20cm from all persons or compliance must be demonstrated according to FCC SAR procedures.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Du9dLaYmFanaKUKbjy6M9A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hon Hai Precision Industry Co., Ltd.
No.151, Sec. 1, Nankan Rd., Lujhu Dist.,
Taoyuan City, 33859
Taiwan
  Date of Grant: 06/17/2019

Application Dated: 06/11/2019
 
Attention: Cathy Kuo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RX3-WBU042IG
Name of Grantee:  Hon Hai Precision Industry Co., Ltd.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac 2x2 + BT combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0021  
CC MO 15C 2412.0  -  2462.0 0.06266  

Output Power listed is conducted.

This grant is valid only when the module is sold to OEM integrators and the host integrator must follow the integration instructions provided by the module manufacturer. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The antenna of this transmitter must be installed to provide a separation distance of at least 20cm from all persons or compliance must be demonstrated according to FCC SAR procedures.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: