FCC ID RXEWD30
WLAN Transmitter
by Omron Corporation Okayama factory
Grantee Code: RXE Product Code: WD30
Latest application date: 2004-10-22
FCC ID Device Details
| FCC ID | RXEWD30 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RXE |
| Product Code | WD30 |
| Applicant Business | Omron Corporation Okayama factory 🇯🇵 |
| Related Domains |  oka.omron.co.jp |
| Equipment Class | WLAN Transmitter |
| Test Firm | TUV America Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2401-2480.2 MHz | Class II permissive change or modification of presently authorized equipment | 2004-10-22 |
| 2401-2480.2 MHz | Class II permissive change or modification of presently authorized equipment | 2004-05-10 |
| 2401-2480.2 MHz | Change in identification of presently authorized equipment. Original FCC ID: O4RWD30 Grant Date: 09/15/2000 | 2004-03-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| external and antenna | External Photos | 2004-10-22 | PDF 141.2 KB |
| original new | External Photos | 2004-05-10 | PDF 157 KB |
| photos | External Photos | 2004-05-10 | PDF 163.6 KB |
| external | External Photos | 2004-03-11 | PDF 486.9 KB |
| location content | ID Label/Location Info | 2004-03-11 | PDF 81.8 KB |
| new data Metadata only | Schematics | 2004-05-10 | PDF 108.1 KB |
| setup photos | Test Setup Photos | 2004-10-22 | PDF 200.3 KB |
| antenna information | Test Report | 2004-10-22 | PDF 110.3 KB |
| report | Test Report | 2004-10-22 | PDF 267.5 KB |
| data | Test Report | 2004-05-10 | PDF 108.1 KB |
| agent | Cover Letter(s) | 2004-10-22 | PDF 39.7 KB |
| change letter | Cover Letter(s) | 2004-10-22 | PDF 33.8 KB |
| change | Cover Letter(s) | 2004-05-10 | PDF 20.1 KB |
| change and agent Metadata only | Cover Letter(s) | 2004-05-10 | PDF 85.3 KB |
| agent | Cover Letter(s) | 2004-03-11 | PDF 36.4 KB |
| id change letter | Cover Letter(s) | 2004-03-11 | PDF 49.6 KB |
Application Information
| Application ID | xL+LTENrnSh3moBpbkotFw== |
|---|---|
| Final Action Date | 2004-10-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010477032 |
| Model | WD30 |
| Frequency Range | 2401-2480.2 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | WLAN Transmitter |
| Responsible Party | Shinji Ueno, Supervisor, shinji_ueno@oka.omron.co.jp , 81 86 276 1797 |
| Test Firm | Jim Owen, TUV America Inc., jowen@TUVam.com  , 8586781435 |
| TCB Email | jevans@tuvam.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change, original grant issued 11 March 2004. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. All electrical mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| xL+LTENrnSh3moBpbkotFw== | 2004-10-22 | Class II permissive change or modification of presently authorized equipment |
| neGxuyMTqDS2P4MFsx4rpg== | 2004-05-10 | Class II permissive change or modification of presently authorized equipment |
| vFzJVUwnL2qcxHxhdEcG1w== | 2004-03-11 | Change in identification of presently authorized equipment. Original FCC ID: O4RWD30 Grant Date: 09/15/2000 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2401-2480.2 MHz | 0.0100000 | 15C |
Grants
TCB Grant - Application xL+LTENrnSh3moBpbkotFw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV America, Inc. 10040 Mesa Rim Road San Diego, CA 92121 |
Date of Grant: 10/22/2004 Application Dated: 10/22/2004 |
| Omron Corporation Okayama factory |
| 2075 Miyoshi Okayama City |
| Okayama, 703-8502 Japan |
| Attention: Shinji Ueno , Supervisor |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RXEWD30 |
| Name of Grantee: | Omron Corporation Okayama factory |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN Transmitter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2401.0 - 2480.2 | 0.01 |
| Class II Permissive Change, original grant issued 11 March 2004. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. All electrical mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application xL+LTENrnSh3moBpbkotFw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Omron Corporation Okayama factory 2075 Miyoshi Okayama City Okayama, 703-8502 Japan |
Date of Grant: 10/22/2004 Application Dated: 10/22/2004 |
| Attention: Shinji Ueno , Supervisor |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RXEWD30 |
| Name of Grantee: | Omron Corporation Okayama factory |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN Transmitter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2401.0 - 2480.2 | 0.01 |
| Class II Permissive Change, original grant issued 11 March 2004. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. All electrical mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV America, Inc. 10040 Mesa Rim Road San Diego, CA 92121 |
Date of Grant: 03/11/2004 Application Dated: 03/11/2004 |
| Omron Corporation Okayama factory |
| 2075 Miyoshi Okayama City |
| Okayama, 703-8502 Japan |
| Attention: Shinji Ueno , Supervisor |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RXEWD30 |
| Name of Grantee: | Omron Corporation Okayama factory |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN Transmitter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2401.0 - 2480.2 | 0.01 |
| The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application vFzJVUwnL2qcxHxhdEcG1w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Omron Corporation Okayama factory 2075 Miyoshi Okayama City Okayama, 703-8502 Japan |
Date of Grant: 03/11/2004 Application Dated: 03/11/2004 |
| Attention: Shinji Ueno , Supervisor |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RXEWD30 |
| Name of Grantee: | Omron Corporation Okayama factory |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN Transmitter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2401.0 - 2480.2 | 0.01 |
| The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV America, Inc. 10040 Mesa Rim Road San Diego, CA 92121 |
Date of Grant: 05/10/2004 Application Dated: 05/10/2004 |
| Omron Corporation Okayama factory |
| 2075 Miyoshi Okayama City |
| Okayama, 703-8502 Japan |
| Attention: Shinji Ueno , Supervisor |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RXEWD30 |
| Name of Grantee: | Omron Corporation Okayama factory |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN Transmitter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2401.0 - 2480.2 | 0.01 |
| Installed antenna cables on the main module. Original grant issued 11 March 2004. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application neGxuyMTqDS2P4MFsx4rpg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Omron Corporation Okayama factory 2075 Miyoshi Okayama City Okayama, 703-8502 Japan |
Date of Grant: 05/10/2004 Application Dated: 05/10/2004 |
| Attention: Shinji Ueno , Supervisor |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RXEWD30 |
| Name of Grantee: | Omron Corporation Okayama factory |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN Transmitter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2401.0 - 2480.2 | 0.01 |
| Installed antenna cables on the main module. Original grant issued 11 March 2004. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |