FCC ID RY20001
Sensor Transmitter Module
by OmniSense LLC
Grantee Code: RY2 Product Code: 0001
Latest application date: 2004-08-02
FCC ID Device Details
| FCC ID | RY20001 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RY2 |
| Product Code | 0001 |
| Applicant Business | OmniSense LLC 🇺🇸 |
| Related Domains |  omnisensellc.com |
| Equipment Class | Sensor Transmitter Module |
| Test Firm | Compatible Electronics |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.2-927.6 MHz | Original Equipment | 2004-08-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Revised Users Manual and Installation Instructions | Users Manual | 2004-08-02 | PDF 796.9 KB |
| Users Manuals Metadata only | Users Manual | 2004-08-02 | PDF 794.8 KB |
| Internal Photos | Internal Photos | 2004-08-02 | PDF 714.2 KB |
| External Photos | External Photos | 2004-08-02 | PDF 714.2 KB |
| FCC Label Locations on Hosts | ID Label/Location Info | 2004-08-02 | PDF 636.4 KB |
| FCC Label Sample for Host | ID Label/Location Info | 2004-08-02 | PDF 6.4 KB |
| FCC Label and Location Metadata only | ID Label/Location Info | 2004-08-02 | PDF 35.4 KB |
| Revised FCC Label and Location for Module | ID Label/Location Info | 2004-08-02 | PDF 1 MB |
| Block Diagram Metadata only | Block Diagram | 2004-08-02 | PDF 61.2 KB |
| Revised Block Diagram | Block Diagram | 2004-08-02 | PDF 3.4 KB |
| Schematics | Schematics | 2004-08-02 | PDF 89 KB |
| Operational Description | Operational Description | 2004-08-02 | PDF 33.4 KB |
| Product Description | Operational Description | 2004-08-02 | PDF 8.5 KB |
| Sample Installation Diagram | Operational Description | 2004-08-02 | PDF 18.2 KB |
| Test Setup Photos | Test Setup Photos | 2004-08-02 | PDF 901.2 KB |
| Revised Test Report Appendices A through C | Test Report | 2004-08-02 | PDF 152.6 KB |
| Revised Test Report Appendix D | Test Report | 2004-08-02 | PDF 465.4 KB |
| Revised Test Report Appendix E | Test Report | 2004-08-02 | PDF 315.2 KB |
| Revised Test Report Appendix E 20 dB BW | Test Report | 2004-08-02 | PDF 319.2 KB |
| Revised Test Report Appendix E Band Edges | Test Report | 2004-08-02 | PDF 633.7 KB |
| Revised Test Report Appendix E No of Hopping Channels | Test Report | 2004-08-02 | PDF 144 KB |
| Revised Test Report Appendix E Peak Power | Test Report | 2004-08-02 | PDF 504.3 KB |
| Revised Test Report Appendix E RF Ant Cond | Test Report | 2004-08-02 | PDF 2.1 MB |
| Revised Test Report Appendix E Spurious Emissions | Test Report | 2004-08-02 | PDF 525.9 KB |
| Revised Test Report Appendix E Time of Occupancy | Test Report | 2004-08-02 | PDF 302.6 KB |
| Revised Test Report Body | Test Report | 2004-08-02 | PDF 186.6 KB |
| Test Report Body Metadata only | Test Report | 2004-08-02 | PDF 178.2 KB |
| Anti Drug Abuse and Authorization Letter | Attestation Statements | 2004-08-02 | PDF 11.7 KB |
| LMA Interpretation from Joe Dichoso | Cover Letter(s) | 2004-08-02 | PDF 9.9 KB |
| Q and A 1 | Cover Letter(s) | 2004-08-02 | PDF 15.1 KB |
| Q and A 2 | Cover Letter(s) | 2004-08-02 | PDF 5.5 KB |
| Request for Modular Approval Metadata only | Cover Letter(s) | 2004-08-02 | PDF 13.4 KB |
| Revised Request for Limited Modular Approval | Cover Letter(s) | 2004-08-02 | PDF 12.4 KB |
Application Information
| Application ID | vTDbfHnZwX4a4fHLnmsBuQ== |
|---|---|
| Final Action Date | 2004-08-02 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0010617025 |
| Model | 0001 |
| Frequency Range | 902.2-927.6 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Sensor Transmitter Module |
| Responsible Party | Chris Hoogenboom, President, chris@omnisensellc.com , 805-340-9625 |
| Agent | Ruby Ruby Ruby, Compatible Electronics, ruby@celectronics.com  , 818-597-0600 |
| Technical Contact | Ruby A Hall, Compatible Electronics, ruby@celectronics.com , 818-597-0600 |
| Test Firm | Ruby Hall, Compatible Electronics, ruby@celectronics.com , 818-597-0600 |
| TCB Email | scott@celectronics.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output is conducted. This device has a Limited Modular Approval (LMA). This module is only approved for use when installed in the three devices described within this application; the Sensor, Installer, and Gateway. Installation into any other device requires a separate FCC approval. This module must be installed by the Grantee. The only antenna approved for use with this module is the integral antenna documented in this filing, and must be installed in the manner described herein. Compliance of this module in its final configuration is the responsibility of the Grantee. For antennas that have not been previously approved for use with this module, the Grantee must file a Class II permissive change to approve the new antenna with this module. This device and its antenna(s) must operate with a separation distance of at least 2.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific operating instructions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vTDbfHnZwX4a4fHLnmsBuQ== | 2004-08-02 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.2-927.6 MHz | 0.0076000 | 15C |
Grants
TCB Grant - Application vTDbfHnZwX4a4fHLnmsBuQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Compatible Electronics, Inc. 114 Olinda Drive Brea, CA 92823 |
Date of Grant: 08/02/2004 Application Dated: 08/02/2004 |
| OmniSense LLC |
| 2230 Peninsula Road |
| Oxnard, CA 93035 |
| Attention: Chris Hoogenboom , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RY20001 |
| Name of Grantee: | OmniSense LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Sensor Transmitter Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.6 | 0.0076 |
| Power output is conducted. This device has a Limited Modular Approval (LMA). This module is only approved for use when installed in the three devices described within this application; the Sensor, Installer, and Gateway. Installation into any other device requires a separate FCC approval. This module must be installed by the Grantee. The only antenna approved for use with this module is the integral antenna documented in this filing, and must be installed in the manner described herein. Compliance of this module in its final configuration is the responsibility of the Grantee. For antennas that have not been previously approved for use with this module, the Grantee must file a Class II permissive change to approve the new antenna with this module. This device and its antenna(s) must operate with a separation distance of at least 2.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific operating instructions for satisfying RF exposure compliance. |
EAS Grant - Application vTDbfHnZwX4a4fHLnmsBuQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
OmniSense LLC 2230 Peninsula Road Oxnard, CA 93035 United States |
Date of Grant: 08/02/2004 Application Dated: 08/02/2004 |
| Attention: Chris Hoogenboom , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RY20001 |
| Name of Grantee: | OmniSense LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Sensor Transmitter Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.6 | 0.0076 |
| Power output is conducted. This device has a Limited Modular Approval (LMA). This module is only approved for use when installed in the three devices described within this application; the Sensor, Installer, and Gateway. Installation into any other device requires a separate FCC approval. This module must be installed by the Grantee. The only antenna approved for use with this module is the integral antenna documented in this filing, and must be installed in the manner described herein. Compliance of this module in its final configuration is the responsibility of the Grantee. For antennas that have not been previously approved for use with this module, the Grantee must file a Class II permissive change to approve the new antenna with this module. This device and its antenna(s) must operate with a separation distance of at least 2.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific operating instructions for satisfying RF exposure compliance. |
| Mail To: |