FCC ID RYJ-SDMCF10G
802.11g Mini-Compact Flash Module with Dual U.FL
by Two Technologies, Inc.
Grantee Code: RYJ Product Code: SDMCF10G
Latest application date: 2008-05-10
FCC ID Device Details
| FCC ID | RYJ-SDMCF10G |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RYJ |
| Product Code | SDMCF10G |
| Applicant Business | Two Technologies, Inc. 🇺🇸 |
| Related Domains |  twotech.com |
| Equipment Class | 802.11g Mini-Compact Flash Module with Dual U.FL |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: TWG-SDMCF10G Grant Date: 07/12/2006 | 2008-05-10 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Photographs of Device | External Photos | 2008-05-10 | PDF 280.2 KB |
| Label Information | ID Label/Location Info | 2008-05-10 | PDF 283.8 KB |
| Change of ID Letter | Cover Letter(s) | 2008-05-10 | PDF 41 KB |
| Original Manufacturer Letter | Cover Letter(s) | 2008-05-10 | PDF 21.7 KB |
Application Information
| Application ID | 7yRYQoae93ZrnUGRrC0bVw== |
|---|---|
| Final Action Date | 2008-05-10 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: TWG-SDMCF10G Grant Date: 07/12/2006 |
| Applicant FRN | 0010566461 |
| Model | -SDMCF10G |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11g Mini-Compact Flash Module with Dual U.FL |
| Responsible Party | Roger Mick, V.P. Engineering, rmick@twotech.com , 215 441-5305 |
| Technical Contact | Philip M. Lanese, Two Technologies, Inc., p1lanese@2t.com  , 215 441 5305 |
| Test Firm | Tommy Wu, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, tommy@adt.com.tw  , 886-2-2605-2180-3 |
| TCB Email | hotline@ATCB.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Single Modular |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 7yRYQoae93ZrnUGRrC0bVw== | 2008-05-10 | Change in identification of presently authorized equipment. Original FCC ID: TWG-SDMCF10G Grant Date: 07/12/2006 |
Grants
TCB Grant - Application 7yRYQoae93ZrnUGRrC0bVw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/10/2008 Application Dated: 05/10/2008 |
| Two Technologies, Inc. |
| 419 Sargon Way |
| Horsham, PA 19044 |
| Attention: Roger Mick , V.P. Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYJ-SDMCF10G |
| Name of Grantee: | Two Technologies, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11g Mini-Compact Flash Module with Dual U.FL |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.08 |
| Power output listed is conducted. Limited Modular Approval for mobile RF exposure condition. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The antenna(s) of the device must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
| Limited Single Modular |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application 7yRYQoae93ZrnUGRrC0bVw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Two Technologies, Inc. 419 Sargon Way Horsham, PA 19044 United States |
Date of Grant: 05/10/2008 Application Dated: 05/10/2008 |
| Attention: Roger Mick , V.P. Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYJ-SDMCF10G |
| Name of Grantee: | Two Technologies, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11g Mini-Compact Flash Module with Dual U.FL |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.08 |
| Power output listed is conducted. Limited Modular Approval for mobile RF exposure condition. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The antenna(s) of the device must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
| Limited Single Modular |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |