FCC ID RYJJETTXL2B
9XTEND OEM RF Module
by Two Technologies, Inc.
Grantee Code: RYJ Product Code: JETTXL2B
Latest application date: 2007-01-07
FCC ID Device Details
| FCC ID | RYJJETTXL2B |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RYJ |
| Product Code | JETTXL2B |
| Applicant Business | Two Technologies, Inc. 🇺🇸 |
| Related Domains |  twotech.com  2t.com |
| Equipment Class | 9XTEND OEM RF Module |
| Test Firm | UNISYS Corporation |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.9-927.1 MHz | Class II permissive change or modification of presently authorized equipment | 2007-01-07 |
| 902.9-927.1 MHz | Change in identification of presently authorized equipment. Original FCC ID: OUR-9XTEND Grant Date: 11/15/2004 | 2006-12-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| int pix | Internal Photos | 2007-01-07 | PDF 669.9 KB |
| ext pix | External Photos | 2007-01-07 | PDF 451.9 KB |
| ext pix | External Photos | 2006-12-26 | PDF 313.7 KB |
| label | ID Label/Location Info | 2007-01-07 | PDF 58.1 KB |
| label loc | ID Label/Location Info | 2007-01-07 | PDF 124.2 KB |
| label dwg | ID Label/Location Info | 2006-12-26 | PDF 58.1 KB |
| label loc ltr | ID Label/Location Info | 2006-12-26 | PDF 85.6 KB |
| original location | ID Label/Location Info | 2006-12-26 | PDF 314.9 KB |
| agent ltr | Cover Letter(s) | 2007-01-07 | PDF 43.4 KB |
| pc letter | Cover Letter(s) | 2007-01-07 | PDF 91 KB |
| cvr ltr | Cover Letter(s) | 2006-12-26 | PDF 86.3 KB |
| MPE | RF Exposure Info | 2007-01-07 | PDF 92 KB |
| MPE support | RF Exposure Info | 2007-01-07 | PDF 134.7 KB |
Application Information
| Application ID | lXd/hIwrXE2JjVtg1nHCPw== |
|---|---|
| Final Action Date | 2007-01-07 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010566461 |
| Model | JETTXL2B |
| Frequency Range | 902.9-927.1 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 9XTEND OEM RF Module |
| Responsible Party | Roger Mick, V.P. Engineering, rmick@twotech.com , 215 441-5305 |
| Technical Contact | Philip Lanese, Two Technologies, planese@2t.com , 215 441 5305 |
| Non-Technical Contact | Megan OConnor, Two Technologies, moconnor@2t.com , 215 441 5305 |
| Test Firm | John Baumeister, UNISYS Corporation, john.baumeister@unisys.com  , 6106482554 |
| TCB Email | hotline@atcb.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval: Power output is conducted at the antenna terminal and can be adjusted from 1 milli-Watt to 1 Watt at the OEM level. This is an OEM Module approved for Limited Modular use operating as a mobile transmitting device with respect to 2.1091 and is limited to OEM installation for Mobile and Fixed applications only. Use of external antennas requires professional installation. When Professional Installation does apply, end users must be prohibited from access to any programming parameters. MPE compliance was demonstrated for the antenna(s) as shown in the filing. The OEM integrator must provide information in the User Manual stating Professional Installation adjustment is required for setting module power and antenna gain to meet EIRP compliance for high gain antenna(s). Co-location as a mobile device with transmitters FCC ID: RYJJETTXL2A and RYJJETTXL is allowed as shown in filings under this FCC ID. The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons, and except for collocation with the above transmitters, must not be co-located or operating in conjunction with any other antenna or transmitter. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Grantee must coordinate with OEM integrators to ensure the end-users and installers of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure the end-user has no Manual Instructions to remove, adjust, or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| lXd/hIwrXE2JjVtg1nHCPw== | 2007-01-07 | Class II permissive change or modification of presently authorized equipment |
| iK1/0G0mTuBoxjOp65rtdw== | 2006-12-26 | Change in identification of presently authorized equipment. Original FCC ID: OUR-9XTEND Grant Date: 11/15/2004 |
Grants
TCB Grant - Application lXd/hIwrXE2JjVtg1nHCPw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 01/07/2007 Application Dated: 01/03/2007 |
| Two Technologies, Inc. |
| 419 Sargon Way |
| Horsham, PA 19044 |
| Attention: Roger Mick , V.P. Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYJJETTXL2B |
| Name of Grantee: | Two Technologies, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 9XTEND OEM RF Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.9 - 927.1 | 1.0 | |||
| 15C | 902.9 - 927.1 | 0.001 |
| Limited Modular Approval: Power output is conducted at the antenna terminal and can be adjusted from 1 milli-Watt to 1 Watt at the OEM level. This is an OEM Module approved for Limited Modular use operating as a mobile transmitting device with respect to 2.1091 and is limited to OEM installation for Mobile and Fixed applications only. Use of external antennas requires professional installation. When Professional Installation does apply, end users must be prohibited from access to any programming parameters. MPE compliance was demonstrated for the antenna(s) as shown in the filing. The OEM integrator must provide information in the User Manual stating Professional Installation adjustment is required for setting module power and antenna gain to meet EIRP compliance for high gain antenna(s). Co-location as a mobile device with transmitters FCC ID: RYJJETTXL2A and RYJJETTXL is allowed as shown in filings under this FCC ID. The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons, and except for collocation with the above transmitters, must not be co-located or operating in conjunction with any other antenna or transmitter. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Grantee must coordinate with OEM integrators to ensure the end-users and installers of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure the end-user has no Manual Instructions to remove, adjust, or install the device. |
EAS Grant - Application lXd/hIwrXE2JjVtg1nHCPw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Two Technologies, Inc. 419 Sargon Way Horsham, PA 19044 United States |
Date of Grant: 01/07/2007 Application Dated: 01/03/2007 |
| Attention: Roger Mick , V.P. Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYJJETTXL2B |
| Name of Grantee: | Two Technologies, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 9XTEND OEM RF Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.9 - 927.1 | 1.0 | |||
| 15C | 902.9 - 927.1 | 0.001 |
| Limited Modular Approval: Power output is conducted at the antenna terminal and can be adjusted from 1 milli-Watt to 1 Watt at the OEM level. This is an OEM Module approved for Limited Modular use operating as a mobile transmitting device with respect to 2.1091 and is limited to OEM installation for Mobile and Fixed applications only. Use of external antennas requires professional installation. When Professional Installation does apply, end users must be prohibited from access to any programming parameters. MPE compliance was demonstrated for the antenna(s) as shown in the filing. The OEM integrator must provide information in the User Manual stating Professional Installation adjustment is required for setting module power and antenna gain to meet EIRP compliance for high gain antenna(s). Co-location as a mobile device with transmitters FCC ID: RYJJETTXL2A and RYJJETTXL is allowed as shown in filings under this FCC ID. The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons, and except for collocation with the above transmitters, must not be co-located or operating in conjunction with any other antenna or transmitter. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Grantee must coordinate with OEM integrators to ensure the end-users and installers of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure the end-user has no Manual Instructions to remove, adjust, or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/26/2006 Application Dated: 12/24/2006 |
| Two Technologies, Inc. |
| 419 Sargon Way |
| Horsham, PA 19044 |
| Attention: Roger Mick , V.P. Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYJJETTXL2B |
| Name of Grantee: | Two Technologies, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 9XTEND OEM RF Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.9 - 927.1 | 1.0 | |||
| 15C | 902.9 - 927.1 | 0.001 |
| Limited Modular Approval: Power output is conducted at the antenna terminal and can be adjusted from 1 milli-Watt to 1 Watt at the OEM level. This is an OEM Module approved for Limited Modular use operating as a mobile transmitting device with respect to 2.1091 and is limited to OEM installation for Mobile and Fixed applications only. Use of external antennas requires professional installation. When Professional Installation does apply, end users must be prohibited from access to any programming parameters. MPE compliance was demonstrated for the antenna(s) as shown in the filing. The OEM integrator must provide information in the User Manual stating Professional Installation adjustment is required for setting module power and antenna gain to meet EIRP compliance for high gain antenna(s). The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Grantee must coordinate with OEM integrators to ensure the end-users and installers of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure the end-user has no Manual Instructions to remove, adjust, or install the device. |
EAS Grant - Application iK1/0G0mTuBoxjOp65rtdw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Two Technologies, Inc. 419 Sargon Way Horsham, PA 19044 United States |
Date of Grant: 12/26/2006 Application Dated: 12/24/2006 |
| Attention: Roger Mick , V.P. Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYJJETTXL2B |
| Name of Grantee: | Two Technologies, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 9XTEND OEM RF Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.9 - 927.1 | 1.0 | |||
| 15C | 902.9 - 927.1 | 0.001 |
| Limited Modular Approval: Power output is conducted at the antenna terminal and can be adjusted from 1 milli-Watt to 1 Watt at the OEM level. This is an OEM Module approved for Limited Modular use operating as a mobile transmitting device with respect to 2.1091 and is limited to OEM installation for Mobile and Fixed applications only. Use of external antennas requires professional installation. When Professional Installation does apply, end users must be prohibited from access to any programming parameters. MPE compliance was demonstrated for the antenna(s) as shown in the filing. The OEM integrator must provide information in the User Manual stating Professional Installation adjustment is required for setting module power and antenna gain to meet EIRP compliance for high gain antenna(s). The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Grantee must coordinate with OEM integrators to ensure the end-users and installers of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure the end-user has no Manual Instructions to remove, adjust, or install the device. |
| Mail To: |