FCC ID RYK-WNFQ258ACNBT
802.11ac/b/g/n WiFi + Bluetooth M.2 Card
by SparkLAN Communications, Inc.
Grantee Code: RYK Product Code: WNFQ258ACNBT
Latest application date: 2017-11-14
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-11-14 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-11-14 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2017-11-14 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA344AH Grant Date: 05/28/2015 | 2017-09-08 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA344AH Grant Date: 05/28/2015 | 2017-09-08 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA344AH Grant Date: 08/21/2015 | 2017-09-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual_20171025_v1 - 5. User Manual | Users Manual | 2017-11-14 | PDF 245.2 KB |
| Internal Photos_20171025_v1 - 7. Internal photos | Internal Photos | 2017-11-14 | PDF 1.1 MB |
| External Photos_20171025_v1 - 8. External photos | External Photos | 2017-11-14 | PDF 123.1 KB |
| External Photos | External Photos | 2017-09-08 | PDF 1.4 MB |
| ID Label & Location Info._20171025_v1 - 4. label and location | ID Label/Location Info | 2017-11-14 | PDF 118.3 KB |
| Label | ID Label/Location Info | 2017-09-08 | PDF 97.4 KB |
| Test Setup Photos_20171025_v1 - 9. Test setup photos-BT_EDR | Test Setup Photos | 2017-11-14 | PDF 322.1 KB |
| Test Setup Photos_20171026_v1 - 9. Test setup photos-Transmit Simultaneously | Test Setup Photos | 2017-11-14 | PDF 103.2 KB |
| Test Setup Photos_20171103_v1 - 9. Test setup photos-BT_LE Rev 1 | Test Setup Photos | 2017-11-14 | PDF 364.4 KB |
| Test Setup Photos_20171103_v1 - 9. Test setup photos-RLAN Rev 1 | Test Setup Photos | 2017-11-14 | PDF 365.2 KB |
| Test Setup Photos_20171103_v1 - 9. Test setup photos-WLAN Rev 1 | Test Setup Photos | 2017-11-14 | PDF 364.9 KB |
| Test Report_20171025_v1 - 6. RF Test report-DFS Slave | Test Report | 2017-11-14 | PDF 637.7 KB |
| Test Report_20171026_v1 - 6. RF Test report-Transmit Simultaneously | Test Report | 2017-11-14 | PDF 744.8 KB |
| Test Report_20171103_v1 - 6. RF Test report-BT_EDR Rev 1 | Test Report | 2017-11-14 | PDF 1.6 MB |
| Test Report_20171103_v1 - 6. RF Test report-RLAN-2 Rev 1 | Test Report | 2017-11-14 | PDF 2.6 MB |
| Test Report_20171103_v1 - 6. RF Test report-RLAN-3 Rev 1 | Test Report | 2017-11-14 | PDF 2.9 MB |
| Test Report_20171103_v1 - 6. RF Test report-WLAN-2 Rev 1 | Test Report | 2017-11-14 | PDF 1.5 MB |
| Test Report_20171108_v1 - 6. RF Test report-BT_LE Rev 2 | Test Report | 2017-11-14 | PDF 1.2 MB |
| Test Report_20171108_v1 - 6. RF Test report-RLAN-1 Rev 2 | Test Report | 2017-11-14 | PDF 2.7 MB |
| Test Report_20171108_v1 - 6. RF Test report-WLAN-1 Rev 2 | Test Report | 2017-11-14 | PDF 2.2 MB |
| Cover Letters_20171025_v1 - 2. Authorization Letter | Cover Letter(s) | 2017-11-14 | PDF 955.6 KB |
| Cover Letters_20171025_v1 - 3. Class II permissive change format letter | Cover Letter(s) | 2017-11-14 | PDF 424.5 KB |
| Cover Letters_20171109_v1 - 11. Request for non-disclosure Rev 1 | Cover Letter(s) | 2017-11-14 | PDF 430.6 KB |
| Agent Authorization Letter | Cover Letter(s) | 2017-09-08 | PDF 911.6 KB |
| Agent Authorization Letter | Cover Letter(s) | 2017-09-08 | PDF 454.1 KB |
| Qualcomm ID Change Authorization Letter | Cover Letter(s) | 2017-09-08 | PDF 181.8 KB |
| SparkLAN Change in ID Request Letter | Cover Letter(s) | 2017-09-08 | PDF 531.3 KB |
| RF Exposure Info._20171025_v1 - 10. FCC RF Exposure Info | RF Exposure Info | 2017-11-14 | PDF 155.1 KB |
| Block Diagrams_20171109_v1 - 13. Block Diagram Rev 2 Metadata only | Block Diagram | PDF 1 MB | |
| Schematics_20171103_v1 - 14. Schematics Metadata only | Schematics | PDF 1.1 MB | |
| Attestations_20171103_v1 - 15. Antenna specification Metadata only | Operational Description | PDF 1.7 MB | |
| Attestations_20171103_v1 - 17. Antenna connector specification-1 Metadata only | Operational Description | PDF 1.2 MB | |
| Attestations_20171103_v1 - 17. Antenna connector specification-2 Metadata only | Operational Description | PDF 1.4 MB | |
| Operational Description_20171103_v1 - 12. Operatinal Description Metadata only | Operational Description | PDF 7.4 KB | |
| Parts List & Tune Up Info._20171103_v1 - 16. Tune-up Procedure Metadata only | Parts List/Tune Up Info | PDF 74.9 KB |
Application Information
| Application ID | ryNeCNxMwHNsfq34JB9Hbg== |
|---|---|
| Final Action Date | 2017-11-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010534840 |
| Model | WNFQ258ACNBT |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 802.11ac/b/g/n WiFi + Bluetooth M.2 Card |
| Responsible Party | Grady Lin, Manager, grady.lin@sparklan.com  , +886-2-2659-1880 |
| Test Firm | Andy Chiu, BTL Inc., Andy@newbtl.com  , 886-2-2657-3299 |
| TCB Email | LST.FRE.CertNotice@ul.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Changes to add new antenna models and BT power reduction. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ryNeCNxMwHNsfq34JB9Hbg== | 2017-11-14 | Class II permissive change or modification of presently authorized equipment |
| iCUKSJ8UD3zoFSUSFwVwng== | 2017-11-14 | Class II permissive change or modification of presently authorized equipment |
| MpS8JuqSqOt/KWoGQE+NDw== | 2017-11-14 | Class II permissive change or modification of presently authorized equipment |
| vlQ3br06qgvO6OYGPP+4sg== | 2017-09-08 | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA344AH Grant Date: 05/28/2015 |
| PnHT66uoCehh1wJNHA1OqA== | 2017-09-08 | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA344AH Grant Date: 05/28/2015 |
| KOpjasLzM3ctDfLh2CP9bw== | 2017-09-08 | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA344AH Grant Date: 05/28/2015 |
| 2Z0r8IFdDjburLhg1tP5aQ== | 2017-09-08 | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA344AH Grant Date: 08/21/2015 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.003 | 15C | CC |
| 2402-2480 MHz | 0.0200000 | 15C | CC |
| 2412-2472 MHz | 0.524 | 15C | CC, MO |
| 2422-2462 MHz | 0.484 | 15C | CC, MO |
| 5190-5230 MHz | 0.06 | 15E | 38, CC, MO |
| 5210 MHz | 0.014 | 15E | 38, CC, MO |
| 5260-5320 MHz | 0.066 | 15E | 38, CC, MO |
| 5270-5310 MHz | 0.057 | 15E | 38, CC, MO |
| 5290 MHz | 0.02 | 15E | 38, CC, MO |
| 5500-5720 MHz | 0.073 | 15E | 38, CC, MO |
| 5510-5710 MHz | 0.054 | 15E | 38, CC, MO |
| 5530-5690 MHz | 0.047 | 15E | 38, CC, MO |
| 5745-5825 MHz | 0.078 | 15E | 38, CC, MO |
| 5775 MHz | 0.0136 | 15E | 38, CC, MO |
Grants
TCB Grant - Application vlQ3br06qgvO6OYGPP+4sg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/08/2017 Application Dated: 09/05/2017 |
| SparkLAN Communications, Inc. |
| 8F., No.257, Sec. 2, Tiding Blvd., Neihu District, |
| Taipei, Taiwan |
| Attention: Grady Lin , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYK-WNFQ258ACNBT |
| Name of Grantee: | SparkLAN Communications, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11ac/b/g/n WiFi + Bluetooth M.2 Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.02 |
| Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value was < 0.1W/Kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application vlQ3br06qgvO6OYGPP+4sg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SparkLAN Communications, Inc. 8F., No.257, Sec. 2, Tiding Blvd., Neihu District, Taipei, Taiwan |
Date of Grant: 09/08/2017 Application Dated: 09/05/2017 |
| Attention: Grady Lin , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYK-WNFQ258ACNBT |
| Name of Grantee: | SparkLAN Communications, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11ac/b/g/n WiFi + Bluetooth M.2 Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.02 |
| Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value was < 0.1W/Kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/14/2017 Application Dated: 11/13/2017 |
| SparkLAN Communications, Inc. |
| 8F., No.257, Sec. 2, Tiding Blvd., Neihu District, |
| Taipei, Taiwan |
| Attention: Grady Lin , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYK-WNFQ258ACNBT |
| Name of Grantee: | SparkLAN Communications, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11ac/b/g/n WiFi + Bluetooth M.2 Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.02 |
| Class II Permissive Changes to add new antenna models and BT power reduction. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ryNeCNxMwHNsfq34JB9Hbg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SparkLAN Communications, Inc. 8F., No.257, Sec. 2, Tiding Blvd., Neihu District, Taipei, Taiwan |
Date of Grant: 11/14/2017 Application Dated: 11/13/2017 |
| Attention: Grady Lin , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYK-WNFQ258ACNBT |
| Name of Grantee: | SparkLAN Communications, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11ac/b/g/n WiFi + Bluetooth M.2 Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.02 |
| Class II Permissive Changes to add new antenna models and BT power reduction. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/08/2017 Application Dated: 09/05/2017 |
| SparkLAN Communications, Inc. |
| 8F., No.257, Sec. 2, Tiding Blvd., Neihu District, |
| Taipei, Taiwan |
| Attention: Grady Lin , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYK-WNFQ258ACNBT |
| Name of Grantee: | SparkLAN Communications, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ac/b/g/n WiFi + Bluetooth M.2 Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.524 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.484 |
| Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.77 W/kg and 0.77 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application PnHT66uoCehh1wJNHA1OqA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SparkLAN Communications, Inc. 8F., No.257, Sec. 2, Tiding Blvd., Neihu District, Taipei, Taiwan |
Date of Grant: 09/08/2017 Application Dated: 09/05/2017 |
| Attention: Grady Lin , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYK-WNFQ258ACNBT |
| Name of Grantee: | SparkLAN Communications, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ac/b/g/n WiFi + Bluetooth M.2 Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.524 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.484 |
| Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.77 W/kg and 0.77 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/14/2017 Application Dated: 11/13/2017 |
| SparkLAN Communications, Inc. |
| 8F., No.257, Sec. 2, Tiding Blvd., Neihu District, |
| Taipei, Taiwan |
| Attention: Grady Lin , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYK-WNFQ258ACNBT |
| Name of Grantee: | SparkLAN Communications, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ac/b/g/n WiFi + Bluetooth M.2 Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.072 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.06 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.014 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.066 | ||
| 38 CC MO | 15E | 5270.0 - 5310.0 | 0.057 | ||
| 38 CC MO | 15E | 5290.0 - 5290.0 | 0.02 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.073 | ||
| 38 CC MO | 15E | 5510.0 - 5710.0 | 0.054 | ||
| 38 CC MO | 15E | 5530.0 - 5690.0 | 0.047 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.078 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.0136 |
| Class II Permissive Changes to add new antenna models and BT power reduction. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application MpS8JuqSqOt/KWoGQE+NDw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SparkLAN Communications, Inc. 8F., No.257, Sec. 2, Tiding Blvd., Neihu District, Taipei, Taiwan |
Date of Grant: 11/14/2017 Application Dated: 11/13/2017 |
| Attention: Grady Lin , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYK-WNFQ258ACNBT |
| Name of Grantee: | SparkLAN Communications, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ac/b/g/n WiFi + Bluetooth M.2 Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.072 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.06 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.014 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.066 | ||
| 38 CC MO | 15E | 5270.0 - 5310.0 | 0.057 | ||
| 38 CC MO | 15E | 5290.0 - 5290.0 | 0.02 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.073 | ||
| 38 CC MO | 15E | 5510.0 - 5710.0 | 0.054 | ||
| 38 CC MO | 15E | 5530.0 - 5690.0 | 0.047 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.078 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.0136 |
| Class II Permissive Changes to add new antenna models and BT power reduction. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/08/2017 Application Dated: 09/05/2017 |
| SparkLAN Communications, Inc. |
| 8F., No.257, Sec. 2, Tiding Blvd., Neihu District, |
| Taipei, Taiwan |
| Attention: Grady Lin , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYK-WNFQ258ACNBT |
| Name of Grantee: | SparkLAN Communications, Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | 802.11ac/b/g/n WiFi + Bluetooth M.2 Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application KOpjasLzM3ctDfLh2CP9bw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SparkLAN Communications, Inc. 8F., No.257, Sec. 2, Tiding Blvd., Neihu District, Taipei, Taiwan |
Date of Grant: 09/08/2017 Application Dated: 09/05/2017 |
| Attention: Grady Lin , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYK-WNFQ258ACNBT |
| Name of Grantee: | SparkLAN Communications, Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | 802.11ac/b/g/n WiFi + Bluetooth M.2 Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/14/2017 Application Dated: 11/13/2017 |
| SparkLAN Communications, Inc. |
| 8F., No.257, Sec. 2, Tiding Blvd., Neihu District, |
| Taipei, Taiwan |
| Attention: Grady Lin , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYK-WNFQ258ACNBT |
| Name of Grantee: | SparkLAN Communications, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ac/b/g/n WiFi + Bluetooth M.2 Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.524 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.484 |
| Class II Permissive Changes to add new antenna models and BT power reduction. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application iCUKSJ8UD3zoFSUSFwVwng==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SparkLAN Communications, Inc. 8F., No.257, Sec. 2, Tiding Blvd., Neihu District, Taipei, Taiwan |
Date of Grant: 11/14/2017 Application Dated: 11/13/2017 |
| Attention: Grady Lin , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYK-WNFQ258ACNBT |
| Name of Grantee: | SparkLAN Communications, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ac/b/g/n WiFi + Bluetooth M.2 Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.524 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.484 |
| Class II Permissive Changes to add new antenna models and BT power reduction. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/08/2017 Application Dated: 09/05/2017 |
| SparkLAN Communications, Inc. |
| 8F., No.257, Sec. 2, Tiding Blvd., Neihu District, |
| Taipei, Taiwan |
| Attention: Grady Lin , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYK-WNFQ258ACNBT |
| Name of Grantee: | SparkLAN Communications, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ac/b/g/n WiFi + Bluetooth M.2 Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.072 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.06 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.014 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.066 | ||
| 38 CC MO | 15E | 5270.0 - 5310.0 | 0.057 | ||
| 38 CC MO | 15E | 5290.0 - 5290.0 | 0.02 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.073 | ||
| 38 CC MO | 15E | 5510.0 - 5710.0 | 0.054 | ||
| 38 CC MO | 15E | 5530.0 - 5690.0 | 0.047 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.078 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.0136 |
| Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.32 W/kg and 0.32 W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 2Z0r8IFdDjburLhg1tP5aQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SparkLAN Communications, Inc. 8F., No.257, Sec. 2, Tiding Blvd., Neihu District, Taipei, Taiwan |
Date of Grant: 09/08/2017 Application Dated: 09/05/2017 |
| Attention: Grady Lin , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RYK-WNFQ258ACNBT |
| Name of Grantee: | SparkLAN Communications, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ac/b/g/n WiFi + Bluetooth M.2 Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.072 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.06 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.014 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.066 | ||
| 38 CC MO | 15E | 5270.0 - 5310.0 | 0.057 | ||
| 38 CC MO | 15E | 5290.0 - 5290.0 | 0.02 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.073 | ||
| 38 CC MO | 15E | 5510.0 - 5710.0 | 0.054 | ||
| 38 CC MO | 15E | 5530.0 - 5690.0 | 0.047 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.078 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.0136 |
| Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.32 W/kg and 0.32 W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |