FCC ID RYYEYSGCC

Bluetooth Dual mode Module

by TAIYO YUDEN CO., LTD.

Grantee Code: RYY   Product Code: EYSGCC
Latest application date: 2017-07-07

FCC ID Device Details

FCC IDRYYEYSGCC
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRYY
Product CodeEYSGCC
Applicant BusinessTAIYO YUDEN CO., LTD. 🇯🇵
Related Domains jty.yuden.co.jp
Equipment ClassBluetooth Dual mode Module
Test FirmUL Korea, Ltd. Suwon Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2017-07-07
2402-2480 MHzOriginal Equipment2017-07-07

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2017-07-07PDF 21.1 KB
Internal PhotoInternal Photos2017-07-07PDF 22.1 KB
Internal PhotosInternal Photos2017-07-07PDF 22.1 KB
External PhotoExternal Photos2017-07-07PDF 22.8 KB
Label and LocationID Label/Location Info2017-07-07PDF 83.9 KB
SetupPhoto BLETest Setup Photos2017-07-07PDF 672.2 KB
SetupPhoto BTTest Setup Photos2017-07-07PDF 686.2 KB
Report BLETest Report2017-07-07PDF 2.4 MB
Report BTTest Report2017-07-07PDF 5.5 MB
Authorization LetterCover Letter(s)2017-07-07PDF 102.1 KB
MA LetterCover Letter(s)2017-07-07PDF 28.2 KB
Request for ConfidentialityCover Letter(s)2017-07-07PDF 27.5 KB
MPE Report BLERF Exposure Info2017-07-07PDF 99.5 KB
MPE Report BTRF Exposure Info2017-07-07PDF 112.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 48.6 KB
Schematics Metadata onlySchematicsPDF 24.6 KB
Antenna Specification Metadata onlyOperational DescriptionPDF 103.2 KB
Interface Specification Metadata onlyOperational DescriptionPDF 145.2 KB
Specification 1 Metadata onlyOperational DescriptionPDF 89.3 KB
Specification 2 Metadata onlyOperational DescriptionPDF 257.5 KB
Theory of Operation-Hopping Metadata onlyOperational DescriptionPDF 21.8 KB
Theory of Operation-Specification 1 Metadata onlyOperational DescriptionPDF 89.3 KB
Theory of Operation-Specification 2 Metadata onlyOperational DescriptionPDF 257.5 KB

Application Information

Application IDfla1vsOVa0YwQhir9Q0TGQ==
Final Action Date2017-07-07
Application PurposeOriginal Equipment
Applicant FRN0008738361
ModelEYSGCC
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionBluetooth Dual mode Module
Responsible PartyHideki Kato, Deputy General Manager, ty-approval@jty.yuden.co.jp , 81-27-346-9185
Test FirmCY Choi, UL Korea, Ltd. Suwon Laboratory, CY.Choi@ul.com , 82313379910
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators, end-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
fla1vsOVa0YwQhir9Q0TGQ==2017-07-07Original Equipment
K9yzz70JivhwxutLUsW0jg==2017-07-07Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.008180015CCC
2402-2480 MHz0.010100015CCC

Grants

TCB Grant - Application K9yzz70JivhwxutLUsW0jg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 07/07/2017

Application Dated: 07/07/2017
TAIYO YUDEN CO., LTD.
43-1, Yawatabara-machi
Takasaki-shi, Gunma, 370-0024
Japan
 
Attention: Hideki Kato , Deputy General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RYYEYSGCC
Name of Grantee:  TAIYO YUDEN CO., LTD.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth Dual mode Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0101  

Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators, end-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application K9yzz70JivhwxutLUsW0jg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TAIYO YUDEN CO., LTD.
43-1, Yawatabara-machi
Takasaki-shi, Gunma, 370-0024
Japan
  Date of Grant: 07/07/2017

Application Dated: 07/07/2017
 
Attention: Hideki Kato , Deputy General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RYYEYSGCC
Name of Grantee:  TAIYO YUDEN CO., LTD.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth Dual mode Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0101  

Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators, end-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application fla1vsOVa0YwQhir9Q0TGQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 07/07/2017

Application Dated: 07/07/2017
TAIYO YUDEN CO., LTD.
43-1, Yawatabara-machi
Takasaki-shi, Gunma, 370-0024
Japan
 
Attention: Hideki Kato , Deputy General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RYYEYSGCC
Name of Grantee:  TAIYO YUDEN CO., LTD.
Equipment Class: Digital Transmission System
Notes: Bluetooth Dual mode Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00818  

Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators, end-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application fla1vsOVa0YwQhir9Q0TGQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TAIYO YUDEN CO., LTD.
43-1, Yawatabara-machi
Takasaki-shi, Gunma, 370-0024
Japan
  Date of Grant: 07/07/2017

Application Dated: 07/07/2017
 
Attention: Hideki Kato , Deputy General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RYYEYSGCC
Name of Grantee:  TAIYO YUDEN CO., LTD.
Equipment Class: Digital Transmission System
Notes: Bluetooth Dual mode Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00818  

Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators, end-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: